lvgl_esp32_drivers/README.md

lvgl esp32 drivers

Supported display controllers

NOTE: You need to set the display horizontal and vertical size, color depth and swap of RGB565 color on the LVGL configuration menuconfig (it's not handled automatically). You can use the rotate member of the lv_disp_drv_t type to rotate the screen.

Display Controller	Type	Interface	Color depth (LV_COLOR_DEPTH)	Swap the 2 bytes of RGB565 color (LV_COLOR_16_SWAP)
ILI9341	TFT	SPI	16: RGB565	Yes
ILI9486	TFT	SPI	16: RGB565	Yes
ILI9488	TFT	SPI	16: RGB565	No
HX8357B/HX8357D	TFT	SPI	16: RGB565	Yes
ST7789	TFT	SPI	16: RGB565	Yes
ST7735S	TFT	SPI	16: RGB565	Yes
FT81x	TFT	Single, Dual, Quad SPI	16: RGB565	No
GC9A01	TFT	SPI	16: RGB565	Yes
RA8875	TFT	SPI	16: RGB565	Yes
SH1107	Monochrome	SPI	1: 1byte per pixel	No
SSD1306	Monochrome	I2C	1: 1byte per pixel	No
IL3820	e-Paper	SPI	1: 1byte per pixel	No
UC8151D/ GoodDisplay GDEW0154M10 DES	e-Paper	SPI	1: 1byte per pixel	No
FitiPower JD79653A/ GoodDisplay GDEW0154M09	e-Paper	SPI	1: 1byte per pixel	No

Supported indev controllers

• XPT2046
• FT3236
• other FT6X36 or the FT6206 controllers should work as well (not tested)
• STMPE610
• FT81x (Single, Dual, and Quad SPI)

If your display or input device (touch) controller is not supported consider contributing to this repo by adding support to it! Contribute controller support

Support for predefined development kits

You can also use the predefined kits, which selects the correct display and input device controllers on the kit, it also sets the pin numbers for the interfaces.

Kit name	Display controller	Hor. Res.	Ver. Res.	Indev controller
ESP Wrover Kit v4.1
M5Stack
M5Stick
M5StickC
Adafruit 3.5 Featherwing
RPi MPI3501
Wemos Lolin OLED
ER-TFT035-6
AIRcable ATAGv3

NOTE: See Supported display controllers for more information on display configuration. NOTE: See Supported indev controllers for more information about indev configuration.