7b571a7fc7
Allows to not allocate a GPIO for display reset: some may have that pin tied or attached to a Power management IC. Supersedes PR from @usedbytes doing same but only for IL9341, this is for all supported displays.
249 lines
6 KiB
C
249 lines
6 KiB
C
/**
|
|
* @file st7796s.c
|
|
*
|
|
*/
|
|
|
|
/*********************
|
|
* INCLUDES
|
|
*********************/
|
|
#include "st7796s.h"
|
|
#include "disp_spi.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_log.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
|
|
/*********************
|
|
* DEFINES
|
|
*********************/
|
|
#define TAG "ST7796S"
|
|
|
|
/**********************
|
|
* TYPEDEFS
|
|
**********************/
|
|
|
|
/*The LCD needs a bunch of command/argument values to be initialized. They are stored in this struct. */
|
|
typedef struct
|
|
{
|
|
uint8_t cmd;
|
|
uint8_t data[16];
|
|
uint8_t databytes; //No of data in data; bit 7 = delay after set; 0xFF = end of cmds.
|
|
} lcd_init_cmd_t;
|
|
|
|
/**********************
|
|
* STATIC PROTOTYPES
|
|
**********************/
|
|
static void st7796s_set_orientation(uint8_t orientation);
|
|
|
|
static void st7796s_send_cmd(uint8_t cmd);
|
|
static void st7796s_send_data(void *data, uint16_t length);
|
|
static void st7796s_send_color(void *data, uint16_t length);
|
|
|
|
/**********************
|
|
* STATIC VARIABLES
|
|
**********************/
|
|
|
|
/**********************
|
|
* MACROS
|
|
**********************/
|
|
|
|
/**********************
|
|
* GLOBAL FUNCTIONS
|
|
**********************/
|
|
|
|
void st7796s_init(void)
|
|
{
|
|
lcd_init_cmd_t init_cmds[] = {
|
|
{0xCF, {0x00, 0x83, 0X30}, 3},
|
|
{0xED, {0x64, 0x03, 0X12, 0X81}, 4},
|
|
{0xE8, {0x85, 0x01, 0x79}, 3},
|
|
{0xCB, {0x39, 0x2C, 0x00, 0x34, 0x02}, 5},
|
|
{0xF7, {0x20}, 1},
|
|
{0xEA, {0x00, 0x00}, 2},
|
|
{0xC0, {0x26}, 1}, /*Power control*/
|
|
{0xC1, {0x11}, 1}, /*Power control */
|
|
{0xC5, {0x35, 0x3E}, 2}, /*VCOM control*/
|
|
{0xC7, {0xBE}, 1}, /*VCOM control*/
|
|
{0x36, {0x28}, 1}, /*Memory Access Control*/
|
|
{0x3A, {0x55}, 1}, /*Pixel Format Set*/
|
|
{0xB1, {0x00, 0x1B}, 2},
|
|
{0xF2, {0x08}, 1},
|
|
{0x26, {0x01}, 1},
|
|
{0xE0, {0x1F, 0x1A, 0x18, 0x0A, 0x0F, 0x06, 0x45, 0X87, 0x32, 0x0A, 0x07, 0x02, 0x07, 0x05, 0x00}, 15},
|
|
{0XE1, {0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3A, 0x78, 0x4D, 0x05, 0x18, 0x0D, 0x38, 0x3A, 0x1F}, 15},
|
|
{0x2A, {0x00, 0x00, 0x00, 0xEF}, 4},
|
|
{0x2B, {0x00, 0x00, 0x01, 0x3f}, 4},
|
|
{0x2C, {0}, 0},
|
|
{0xB7, {0x07}, 1},
|
|
{0xB6, {0x0A, 0x82, 0x27, 0x00}, 4},
|
|
{0x11, {0}, 0x80},
|
|
{0x29, {0}, 0x80},
|
|
{0, {0}, 0xff},
|
|
};
|
|
|
|
#if ST7796S_BCKL == 15
|
|
gpio_config_t io_conf;
|
|
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
|
|
io_conf.mode = GPIO_MODE_OUTPUT;
|
|
io_conf.pin_bit_mask = GPIO_SEL_15;
|
|
io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
|
|
io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
|
|
gpio_config(&io_conf);
|
|
#endif
|
|
|
|
//Initialize non-SPI GPIOs
|
|
gpio_pad_select_gpio(ST7796S_DC);
|
|
gpio_set_direction(ST7796S_DC, GPIO_MODE_OUTPUT);
|
|
|
|
#if ST7796S_USE_RST
|
|
gpio_pad_select_gpio(ST7796S_RST);
|
|
gpio_set_direction(ST7796S_RST, GPIO_MODE_OUTPUT);
|
|
#endif
|
|
|
|
#if ST7796S_ENABLE_BACKLIGHT_CONTROL
|
|
gpio_pad_select_gpio(ST7796S_BCKL);
|
|
gpio_set_direction(ST7796S_BCKL, GPIO_MODE_OUTPUT);
|
|
#endif
|
|
|
|
#if ST7796S_USE_RST
|
|
//Reset the display
|
|
gpio_set_level(ST7796S_RST, 0);
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
gpio_set_level(ST7796S_RST, 1);
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
#endif
|
|
|
|
ESP_LOGI(TAG, "Initialization.");
|
|
|
|
//Send all the commands
|
|
uint16_t cmd = 0;
|
|
while (init_cmds[cmd].databytes != 0xff)
|
|
{
|
|
st7796s_send_cmd(init_cmds[cmd].cmd);
|
|
st7796s_send_data(init_cmds[cmd].data, init_cmds[cmd].databytes & 0x1F);
|
|
if (init_cmds[cmd].databytes & 0x80)
|
|
{
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
}
|
|
cmd++;
|
|
}
|
|
|
|
st7796s_enable_backlight(true);
|
|
|
|
st7796s_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
|
|
|
|
#if ST7796S_INVERT_COLORS == 1
|
|
st7796s_send_cmd(0x21);
|
|
#else
|
|
st7796s_send_cmd(0x20);
|
|
#endif
|
|
}
|
|
|
|
void st7796s_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map)
|
|
{
|
|
uint8_t data[4];
|
|
|
|
/*Column addresses*/
|
|
st7796s_send_cmd(0x2A);
|
|
data[0] = (area->x1 >> 8) & 0xFF;
|
|
data[1] = area->x1 & 0xFF;
|
|
data[2] = (area->x2 >> 8) & 0xFF;
|
|
data[3] = area->x2 & 0xFF;
|
|
st7796s_send_data(data, 4);
|
|
|
|
/*Page addresses*/
|
|
st7796s_send_cmd(0x2B);
|
|
data[0] = (area->y1 >> 8) & 0xFF;
|
|
data[1] = area->y1 & 0xFF;
|
|
data[2] = (area->y2 >> 8) & 0xFF;
|
|
data[3] = area->y2 & 0xFF;
|
|
st7796s_send_data(data, 4);
|
|
|
|
/*Memory write*/
|
|
st7796s_send_cmd(0x2C);
|
|
|
|
uint32_t size = lv_area_get_width(area) * lv_area_get_height(area);
|
|
|
|
st7796s_send_color((void *)color_map, size * 2);
|
|
}
|
|
|
|
void st7796s_enable_backlight(bool backlight)
|
|
{
|
|
#if ST7796S_ENABLE_BACKLIGHT_CONTROL
|
|
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
|
|
uint32_t tmp = 0;
|
|
|
|
#if (ST7796S_BCKL_ACTIVE_LVL == 1)
|
|
tmp = backlight ? 1 : 0;
|
|
#else
|
|
tmp = backlight ? 0 : 1;
|
|
#endif
|
|
|
|
gpio_set_level(ST7796S_BCKL, tmp);
|
|
#endif
|
|
}
|
|
|
|
void st7796s_sleep_in()
|
|
{
|
|
uint8_t data[] = {0x08};
|
|
st7796s_send_cmd(0x10);
|
|
st7796s_send_data(&data, 1);
|
|
}
|
|
|
|
void st7796s_sleep_out()
|
|
{
|
|
uint8_t data[] = {0x08};
|
|
st7796s_send_cmd(0x11);
|
|
st7796s_send_data(&data, 1);
|
|
}
|
|
|
|
/**********************
|
|
* STATIC FUNCTIONS
|
|
**********************/
|
|
|
|
static void st7796s_send_cmd(uint8_t cmd)
|
|
{
|
|
disp_wait_for_pending_transactions();
|
|
gpio_set_level(ST7796S_DC, 0); /*Command mode*/
|
|
disp_spi_send_data(&cmd, 1);
|
|
}
|
|
|
|
static void st7796s_send_data(void *data, uint16_t length)
|
|
{
|
|
disp_wait_for_pending_transactions();
|
|
gpio_set_level(ST7796S_DC, 1); /*Data mode*/
|
|
disp_spi_send_data(data, length);
|
|
}
|
|
|
|
static void st7796s_send_color(void *data, uint16_t length)
|
|
{
|
|
disp_wait_for_pending_transactions();
|
|
gpio_set_level(ST7796S_DC, 1); /*Data mode*/
|
|
disp_spi_send_colors(data, length);
|
|
}
|
|
|
|
static void st7796s_set_orientation(uint8_t orientation)
|
|
{
|
|
// ESP_ASSERT(orientation < 4);
|
|
|
|
const char *orientation_str[] = {
|
|
"PORTRAIT", "PORTRAIT_INVERTED", "LANDSCAPE", "LANDSCAPE_INVERTED"};
|
|
|
|
ESP_LOGI(TAG, "Display orientation: %s", orientation_str[orientation]);
|
|
|
|
#if defined CONFIG_LV_PREDEFINED_DISPLAY_M5STACK
|
|
uint8_t data[] = {0x68, 0x68, 0x08, 0x08};
|
|
#elif defined(CONFIG_LV_PREDEFINED_DISPLAY_WROVER4)
|
|
uint8_t data[] = {0x4C, 0x88, 0x28, 0xE8};
|
|
#elif defined(CONFIG_LV_PREDEFINED_DISPLAY_WT32_SC01)
|
|
uint8_t data[] = {0x48, 0x88, 0x28, 0xE8};
|
|
#elif defined(CONFIG_LV_PREDEFINED_DISPLAY_NONE)
|
|
uint8_t data[] = {0x48, 0x88, 0x28, 0xE8};
|
|
#endif
|
|
|
|
ESP_LOGI(TAG, "0x36 command value: 0x%02X", data[orientation]);
|
|
|
|
st7796s_send_cmd(0x36);
|
|
st7796s_send_data((void *)&data[orientation], 1);
|
|
}
|