7b571a7fc7
Allows to not allocate a GPIO for display reset: some may have that pin tied or attached to a Power management IC. Supersedes PR from @usedbytes doing same but only for IL9341, this is for all supported displays.
230 lines
6.3 KiB
C
230 lines
6.3 KiB
C
/**
|
|
* @file ili9481.c
|
|
*/
|
|
|
|
/*********************
|
|
* INCLUDES
|
|
*********************/
|
|
#include "ili9481.h"
|
|
#include "disp_spi.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_log.h"
|
|
#include "esp_heap_caps.h"
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
|
|
/*********************
|
|
* DEFINES
|
|
*********************/
|
|
#define TAG "ILI9481"
|
|
|
|
/**********************
|
|
* TYPEDEFS
|
|
**********************/
|
|
|
|
/*The LCD needs a bunch of command/argument values to be initialized. They are stored in this struct. */
|
|
typedef struct {
|
|
uint8_t cmd;
|
|
uint8_t data[16];
|
|
uint8_t databytes; //No of data in data; bit 7 = delay after set; 0xFF = end of cmds.
|
|
} lcd_init_cmd_t;
|
|
|
|
/**********************
|
|
* STATIC PROTOTYPES
|
|
**********************/
|
|
|
|
static void ili9481_set_orientation(uint8_t orientation);
|
|
static void ili9481_send_cmd(uint8_t cmd);
|
|
static void ili9481_send_data(void * data, uint16_t length);
|
|
static void ili9481_send_color(void * data, uint16_t length);
|
|
|
|
/**********************
|
|
* STATIC VARIABLES
|
|
**********************/
|
|
|
|
/**********************
|
|
* MACROS
|
|
**********************/
|
|
|
|
/**********************
|
|
* GLOBAL FUNCTIONS
|
|
**********************/
|
|
|
|
void ili9481_init(void)
|
|
{
|
|
lcd_init_cmd_t ili_init_cmds[]={
|
|
{ILI9481_CMD_SLEEP_OUT, {0x00}, 0x80},
|
|
{ILI9481_CMD_POWER_SETTING, {0x07, 0x42, 0x18}, 3},
|
|
{ILI9481_CMD_VCOM_CONTROL, {0x00, 0x07, 0x10}, 3},
|
|
{ILI9481_CMD_POWER_CONTROL_NORMAL, {0x01, 0x02}, 2},
|
|
{ILI9481_CMD_PANEL_DRIVE, {0x10, 0x3B, 0x00, 0x02, 0x11}, 5},
|
|
{ILI9481_CMD_FRAME_RATE, {0x03}, 1},
|
|
{ILI9481_CMD_FRAME_MEMORY_ACCESS, {0x0, 0x0, 0x0, 0x0}, 4},
|
|
//{ILI9481_CMD_DISP_TIMING_NORMAL, {0x10, 0x10, 0x22}, 3},
|
|
{ILI9481_CMD_GAMMA_SETTING, {0x00, 0x32, 0x36, 0x45, 0x06, 0x16, 0x37, 0x75, 0x77, 0x54, 0x0C, 0x00}, 12},
|
|
{ILI9481_CMD_MEMORY_ACCESS_CONTROL, {0x0A}, 1},
|
|
#if ILI9481_INVERT_COLORS
|
|
{ILI9481_CMD_DISP_INVERSION_ON, {}, 0},
|
|
#endif
|
|
{ILI9481_CMD_COLMOD_PIXEL_FORMAT_SET, {0x66}, 1},
|
|
{ILI9481_CMD_NORMAL_DISP_MODE_ON, {}, 0x80},
|
|
{ILI9481_CMD_DISPLAY_ON, {}, 0x80},
|
|
{0, {0}, 0xff},
|
|
};
|
|
|
|
//Initialize non-SPI GPIOs
|
|
gpio_pad_select_gpio(ILI9481_DC);
|
|
gpio_set_direction(ILI9481_DC, GPIO_MODE_OUTPUT);
|
|
|
|
#if ILI9481_USE_RST
|
|
gpio_pad_select_gpio(ILI9481_RST);
|
|
gpio_set_direction(ILI9481_RST, GPIO_MODE_OUTPUT);
|
|
#endif
|
|
|
|
#if ILI9481_ENABLE_BACKLIGHT_CONTROL
|
|
gpio_pad_select_gpio(ILI9481_BCKL);
|
|
gpio_set_direction(ILI9481_BCKL, GPIO_MODE_OUTPUT);
|
|
#endif
|
|
|
|
#if ILI9481_USE_RST
|
|
//Reset the display
|
|
gpio_set_level(ILI9481_RST, 0);
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
gpio_set_level(ILI9481_RST, 1);
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
#endif
|
|
|
|
ESP_LOGI(TAG, "ILI9481 initialization.");
|
|
|
|
// Exit sleep
|
|
ili9481_send_cmd(0x01); /* Software reset */
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
|
|
//Send all the commands
|
|
uint16_t cmd = 0;
|
|
while (ili_init_cmds[cmd].databytes!=0xff) {
|
|
ili9481_send_cmd(ili_init_cmds[cmd].cmd);
|
|
ili9481_send_data(ili_init_cmds[cmd].data, ili_init_cmds[cmd].databytes&0x1F);
|
|
if (ili_init_cmds[cmd].databytes & 0x80) {
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
}
|
|
cmd++;
|
|
}
|
|
|
|
ili9481_enable_backlight(true);
|
|
|
|
ili9481_set_orientation(ILI9481_DISPLAY_ORIENTATION);
|
|
}
|
|
|
|
// Flush function based on mvturnho repo
|
|
void ili9481_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map)
|
|
{
|
|
uint32_t size = lv_area_get_width(area) * lv_area_get_height(area);
|
|
|
|
lv_color16_t *buffer_16bit = (lv_color16_t *) color_map;
|
|
uint8_t *mybuf;
|
|
do {
|
|
mybuf = (uint8_t *) heap_caps_malloc(3 * size * sizeof(uint8_t), MALLOC_CAP_DMA);
|
|
if (mybuf == NULL) ESP_LOGW(TAG, "Could not allocate enough DMA memory!");
|
|
} while (mybuf == NULL);
|
|
|
|
uint32_t LD = 0;
|
|
uint32_t j = 0;
|
|
|
|
for (uint32_t i = 0; i < size; i++) {
|
|
LD = buffer_16bit[i].full;
|
|
mybuf[j] = (uint8_t) (((LD & 0xF800) >> 8) | ((LD & 0x8000) >> 13));
|
|
j++;
|
|
mybuf[j] = (uint8_t) ((LD & 0x07E0) >> 3);
|
|
j++;
|
|
mybuf[j] = (uint8_t) (((LD & 0x001F) << 3) | ((LD & 0x0010) >> 2));
|
|
j++;
|
|
}
|
|
|
|
/* Column addresses */
|
|
uint8_t xb[] = {
|
|
(uint8_t) (area->x1 >> 8) & 0xFF,
|
|
(uint8_t) (area->x1) & 0xFF,
|
|
(uint8_t) (area->x2 >> 8) & 0xFF,
|
|
(uint8_t) (area->x2) & 0xFF,
|
|
};
|
|
|
|
/* Page addresses */
|
|
uint8_t yb[] = {
|
|
(uint8_t) (area->y1 >> 8) & 0xFF,
|
|
(uint8_t) (area->y1) & 0xFF,
|
|
(uint8_t) (area->y2 >> 8) & 0xFF,
|
|
(uint8_t) (area->y2) & 0xFF,
|
|
};
|
|
|
|
/*Column addresses*/
|
|
ili9481_send_cmd(ILI9481_CMD_COLUMN_ADDRESS_SET);
|
|
ili9481_send_data(xb, 4);
|
|
|
|
/*Page addresses*/
|
|
ili9481_send_cmd(ILI9481_CMD_PAGE_ADDRESS_SET);
|
|
ili9481_send_data(yb, 4);
|
|
|
|
/*Memory write*/
|
|
ili9481_send_cmd(ILI9481_CMD_MEMORY_WRITE);
|
|
|
|
ili9481_send_color((void *) mybuf, size * 3);
|
|
heap_caps_free(mybuf);
|
|
}
|
|
|
|
void ili9481_enable_backlight(bool backlight)
|
|
{
|
|
#if ILI9481_ENABLE_BACKLIGHT_CONTROL
|
|
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
|
|
uint32_t tmp = 0;
|
|
|
|
#if (ILI9481_BCKL_ACTIVE_LVL==1)
|
|
tmp = backlight ? 1 : 0;
|
|
#else
|
|
tmp = backlight ? 0 : 1;
|
|
#endif
|
|
|
|
gpio_set_level(ILI9481_BCKL, tmp);
|
|
#endif
|
|
}
|
|
|
|
/**********************
|
|
* STATIC FUNCTIONS
|
|
**********************/
|
|
|
|
|
|
static void ili9481_send_cmd(uint8_t cmd)
|
|
{
|
|
disp_wait_for_pending_transactions();
|
|
gpio_set_level(ILI9481_DC, 0); /*Command mode*/
|
|
disp_spi_send_data(&cmd, 1);
|
|
}
|
|
|
|
static void ili9481_send_data(void * data, uint16_t length)
|
|
{
|
|
disp_wait_for_pending_transactions();
|
|
gpio_set_level(ILI9481_DC, 1); /*Data mode*/
|
|
disp_spi_send_data(data, length);
|
|
}
|
|
|
|
static void ili9481_send_color(void * data, uint16_t length)
|
|
{
|
|
disp_wait_for_pending_transactions();
|
|
gpio_set_level(ILI9481_DC, 1); /*Data mode*/
|
|
disp_spi_send_colors(data, length);
|
|
}
|
|
|
|
static void ili9481_set_orientation(uint8_t orientation)
|
|
{
|
|
const char *orientation_str[] = {
|
|
"PORTRAIT", "PORTRAIT_INVERTED", "LANDSCAPE", "LANDSCAPE_INVERTED"
|
|
};
|
|
|
|
ESP_LOGI(TAG, "Display orientation: %s", orientation_str[orientation]);
|
|
|
|
uint8_t data[] = {0x48, 0x4B, 0x28, 0x2B};
|
|
ili9481_send_cmd(ILI9481_CMD_MEMORY_ACCESS_CONTROL);
|
|
ili9481_send_data((void *) &data[orientation], 1);
|
|
}
|