zenermerps/lvgl_esp32_drivers
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
lvgl_esp32_drivers/lvgl_tft/hx8357.c
Carlos Diaz 463721e291
Cleanup lvgl_helpers (#171) 
* lvgl_spi_conf: Define TFT_SPI_HOST even when no SPI is choosen

* lvgl_helpers: Let the SPI driver choose SPI DMA Channel

Use SPI_DMA_CH1 only on ESP32 target.

* lvgl_helpers: Move FT81X initialization to helper

* lvgl_interface_init: Initial cleanup

* lvgl_helpers: Replace spi_common_dma_t values with integers

This enum was introduced in ESP-IDF v4.3 and can't be used in older versions
of ESP-IDF.

* lvgl_helpers: Rearrange includes

* lvgl_tft: Remove gpio_pad_select_gpio from drivers init functions

* lvgl_helpers: Use spi_host_device_t from v4.3 onwards

* esp_backlight: Replace gpio with esp_rom API

* il3820: Remove GPIO initialization from driver init

* FT81x: Replace gpio_pad_select_gpio with esp_rom alias

* Fix esp_rom_gpio.h path

* FT81x: Fix esp_rom_gpio.h path

* adcraw: Disable usage of gpio_pad_select_gpio

* GC9A01: Remove usage of gpio_pad_select_gpio

* ra8875: Remove usage of gpio_pad_select_gpio

* Revert "esp_backlight: Replace gpio with esp_rom API"

This reverts commit 24e4bf0b88.

* Revert "FT81x: Replace gpio_pad_select_gpio with esp_rom alias"

This reverts commit 8c7bc42140.

* esp_lcd_backlight: Handle different versions of ESP-IDF

* esp_lcd_backlight: Add missing header

* lvgl_spi_conf: Add missing include

* uc8151d/jd79653a: Fix compilation error when logging is enabled

* FT81x: Handle ESP-IDF v4.3 rom_gpio

* FT81x: Add missing include

* Compilation error when SPI Host is not selected

* lvgl_helpers.c: Enable init_ft81x only when FT81X is selected

* adcraw: Handle gpio_pad_selection on multiple ESP-IDF versions

* esp_lcd_backlight: Remove esp_rom functions

* FT81x: Remove esp_rom functions

* adcraw: Remove esp_rom functions
2022-02-02 16:45:52 -06:00

286 lines
7.9 KiB
C
Raw Blame History

/**
* @file HX8357.c
*
* Roughly based on the Adafruit_HX8357_Library
*
* This library should work with:
* Adafruit 3.5" TFT 320x480 + Touchscreen Breakout
* http://www.adafruit.com/products/2050
*
* Adafruit TFT FeatherWing - 3.5" 480x320 Touchscreen for Feathers
* https://www.adafruit.com/product/3651
*
*/
/*********************
* INCLUDES
*********************/
#include "hx8357.h"
#include "disp_spi.h"
#include "driver/gpio.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
/*********************
* DEFINES
*********************/
#define MADCTL_MY 0x80 ///< Bottom to top
#define MADCTL_MX 0x40 ///< Right to left
#define MADCTL_MV 0x20 ///< Reverse Mode
#define MADCTL_ML 0x10 ///< LCD refresh Bottom to top
#define MADCTL_RGB 0x00 ///< Red-Green-Blue pixel order
#define MADCTL_BGR 0x08 ///< Blue-Green-Red pixel order
#define MADCTL_MH 0x04 ///< LCD refresh right to left
/**********************
* TYPEDEFS
**********************/
/*The LCD needs a bunch of command/argument values to be initialized. They are stored in this struct. */
typedef struct {
uint8_t cmd;
uint8_t data[16];
uint8_t databytes; //No of data in data; bit 7 = delay after set; 0xFF = end of cmds.
} lcd_init_cmd_t;
/**********************
* STATIC PROTOTYPES
**********************/
static void hx8357_send_cmd(uint8_t cmd);
static void hx8357_send_data(void * data, uint16_t length);
static void hx8357_send_color(void * data, uint16_t length);
static void hx8357_reset(void);
/**********************
* INITIALIZATION ARRAYS
**********************/
// Taken from the Adafruit driver
static const uint8_t
initb[] = {
HX8357B_SETPOWER, 3,
0x44, 0x41, 0x06,
HX8357B_SETVCOM, 2,
0x40, 0x10,
HX8357B_SETPWRNORMAL, 2,
0x05, 0x12,
HX8357B_SET_PANEL_DRIVING, 5,
0x14, 0x3b, 0x00, 0x02, 0x11,
HX8357B_SETDISPLAYFRAME, 1,
0x0c, // 6.8mhz
HX8357B_SETPANELRELATED, 1,
0x01, // BGR
0xEA, 3, // seq_undefined1, 3 args
0x03, 0x00, 0x00,
0xEB, 4, // undef2, 4 args
0x40, 0x54, 0x26, 0xdb,
HX8357B_SETGAMMA, 12,
0x00, 0x15, 0x00, 0x22, 0x00, 0x08, 0x77, 0x26, 0x66, 0x22, 0x04, 0x00,
HX8357_MADCTL, 1,
0xC0,
HX8357_COLMOD, 1,
0x55,
HX8357_PASET, 4,
0x00, 0x00, 0x01, 0xDF,
HX8357_CASET, 4,
0x00, 0x00, 0x01, 0x3F,
HX8357B_SETDISPMODE, 1,
0x00, // CPU (DBI) and internal oscillation ??
HX8357_SLPOUT, 0x80 + 120/5, // Exit sleep, then delay 120 ms
HX8357_DISPON, 0x80 + 10/5, // Main screen turn on, delay 10 ms
0 // END OF COMMAND LIST
}, initd[] = {
HX8357_SWRESET, 0x80 + 100/5, // Soft reset, then delay 10 ms
HX8357D_SETC, 3,
0xFF, 0x83, 0x57,
0xFF, 0x80 + 500/5, // No command, just delay 300 ms
HX8357_SETRGB, 4,
0x80, 0x00, 0x06, 0x06, // 0x80 enables SDO pin (0x00 disables)
HX8357D_SETCOM, 1,
0x25, // -1.52V
HX8357_SETOSC, 1,
0x68, // Normal mode 70Hz, Idle mode 55 Hz
HX8357_SETPANEL, 1,
0x05, // BGR, Gate direction swapped
HX8357_SETPWR1, 6,
0x00, // Not deep standby
0x15, // BT
0x1C, // VSPR
0x1C, // VSNR
0x83, // AP
0xAA, // FS
HX8357D_SETSTBA, 6,
0x50, // OPON normal
0x50, // OPON idle
0x01, // STBA
0x3C, // STBA
0x1E, // STBA
0x08, // GEN
HX8357D_SETCYC, 7,
0x02, // NW 0x02
0x40, // RTN
0x00, // DIV
0x2A, // DUM
0x2A, // DUM
0x0D, // GDON
0x78, // GDOFF
HX8357D_SETGAMMA, 34,
0x02, 0x0A, 0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b,
0x42, 0x3A, 0x27, 0x1B, 0x08, 0x09, 0x03, 0x02, 0x0A,
0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A,
0x27, 0x1B, 0x08, 0x09, 0x03, 0x00, 0x01,
HX8357_COLMOD, 1,
0x55, // 16 bit
HX8357_MADCTL, 1,
0xC0,
HX8357_TEON, 1,
0x00, // TW off
HX8357_TEARLINE, 2,
0x00, 0x02,
HX8357_SLPOUT, 0x80 + 150/5, // Exit Sleep, then delay 150 ms
HX8357_DISPON, 0x80 + 50/5, // Main screen turn on, delay 50 ms
0, // END OF COMMAND LIST
};
/**********************
* STATIC VARIABLES
**********************/
/**********************
* MACROS
**********************/
/**********************
* GLOBAL FUNCTIONS
**********************/
static uint8_t displayType = HX8357D;
void hx8357_init(void)
{
hx8357_reset();
LV_LOG_INFO("Initialization.");
//Send all the commands
const uint8_t *addr = (displayType == HX8357B) ? initb : initd;
uint8_t cmd, x, numArgs;
while((cmd = *addr++) > 0) { // '0' command ends list
x = *addr++;
numArgs = x & 0x7F;
if (cmd != 0xFF) { // '255' is ignored
if (x & 0x80) { // If high bit set, numArgs is a delay time
hx8357_send_cmd(cmd);
} else {
hx8357_send_cmd(cmd);
hx8357_send_data((void *) addr, numArgs);
addr += numArgs;
}
}
if (x & 0x80) { // If high bit set...
vTaskDelay(numArgs * 5 / portTICK_RATE_MS); // numArgs is actually a delay time (5ms units)
}
}
hx8357_set_rotation(1);
#if HX8357_INVERT_COLORS
hx8357_send_cmd(HX8357_INVON);
#else
hx8357_send_cmd(HX8357_INVOFF);
#endif
}
void hx8357_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map)
{
uint32_t size = lv_area_get_width(area) * lv_area_get_height(area);
/* Column addresses */
uint8_t xb[] = {
(uint8_t) (area->x1 >> 8) & 0xFF,
(uint8_t) (area->x1) & 0xFF,
(uint8_t) (area->x2 >> 8) & 0xFF,
(uint8_t) (area->x2) & 0xFF,
};
/* Page addresses */
uint8_t yb[] = {
(uint8_t) (area->y1 >> 8) & 0xFF,
(uint8_t) (area->y1) & 0xFF,
(uint8_t) (area->y2 >> 8) & 0xFF,
(uint8_t) (area->y2) & 0xFF,
};
/*Column addresses*/
hx8357_send_cmd(HX8357_CASET);
hx8357_send_data(xb, 4);
/*Page addresses*/
hx8357_send_cmd(HX8357_PASET);
hx8357_send_data(yb, 4);
/*Memory write*/
hx8357_send_cmd(HX8357_RAMWR);
hx8357_send_color((void*)color_map, size * 2);
}
void hx8357_set_rotation(uint8_t r)
{
r = r & 3; // can't be higher than 3
switch(r) {
case 0:
r = MADCTL_MX | MADCTL_MY | MADCTL_RGB;
break;
case 1:
r = MADCTL_MV | MADCTL_MY | MADCTL_RGB;
break;
case 2:
r = MADCTL_RGB;
break;
case 3:
r = MADCTL_MX | MADCTL_MV | MADCTL_RGB;
break;
}
hx8357_send_cmd(HX8357_MADCTL);
hx8357_send_data(&r, 1);
}
/**********************
* STATIC FUNCTIONS
**********************/
static void hx8357_send_cmd(uint8_t cmd)
{
disp_wait_for_pending_transactions();
gpio_set_level(HX8357_DC, 0); /*Command mode*/
disp_spi_send_data(&cmd, 1);
}
static void hx8357_send_data(void * data, uint16_t length)
{
disp_wait_for_pending_transactions();
gpio_set_level(HX8357_DC, 1); /*Data mode*/
disp_spi_send_data(data, length);
}
static void hx8357_send_color(void * data, uint16_t length)
{
disp_wait_for_pending_transactions();
gpio_set_level(HX8357_DC, 1); /*Data mode*/
disp_spi_send_colors(data, length);
}
static void hx8357_reset(void)
{
#if HX8357_USE_RST
gpio_set_level(HX8357_RST, 0);
vTaskDelay(10 / portTICK_RATE_MS);
gpio_set_level(HX8357_RST, 1);
vTaskDelay(120 / portTICK_RATE_MS);
#endif
}
Reference in a new issue View git blame Copy permalink