lvgl_esp32_drivers/lvgl_tft/ili9486.c

/**
 * @file mpi3501.c
 *
 */

/*********************
 *      INCLUDES
 *********************/
#include "ili9486.h"
#include "disp_spi.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"

/*********************
 *      DEFINES
 *********************/
 #define TAG "ILI9486"

/**********************
 *      TYPEDEFS
 **********************/

/*The LCD needs a bunch of command/argument values to be initialized. They are stored in this struct. */
typedef struct {
    uint8_t cmd;
    uint8_t data[16];
    uint8_t databytes; //No of data in data; bit 7 = delay after set; 0xFF = end of cmds.
} lcd_init_cmd_t;

/**********************
 *  STATIC PROTOTYPES
 **********************/
static void ili9486_set_orientation(uint8_t orientation);

static void ili9486_send_cmd(uint8_t cmd);
static void ili9486_send_data(void * data, uint16_t length);
static void ili9486_send_color(void * data, uint16_t length);

/**********************
 *  STATIC VARIABLES
 **********************/

/**********************
 *      MACROS
 **********************/

/**********************
 *   GLOBAL FUNCTIONS
 **********************/

void ili9486_init(void)
{
	lcd_init_cmd_t ili_init_cmds[]={
		{0x11, {0}, 0x80},
		{0x3A, {0x55}, 1},
		{0x2C, {0x44}, 1},
		{0xC5, {0x00, 0x00, 0x00, 0x00}, 4},
		{0xE0, {0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98, 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x00}, 15},
		{0XE1, {0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00}, 15},
		{0x20, {0}, 0},				/* display inversion OFF */
		{0x36, {0x48}, 1},
		{0x29, {0}, 0x80},			/* display on */
		{0x00, {0}, 0xff},
	};

#if ILI9486_BCKL == 15
    gpio_config_t io_conf;
    io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
    io_conf.mode = GPIO_MODE_OUTPUT;
    io_conf.pin_bit_mask = GPIO_SEL_15;
    io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
    io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
    gpio_config(&io_conf);
#endif

	//Initialize non-SPI GPIOs
        gpio_pad_select_gpio(ILI9486_DC);
	gpio_set_direction(ILI9486_DC, GPIO_MODE_OUTPUT);

#if ILI9486_USE_RST
        gpio_pad_select_gpio(ILI9486_RST);
	gpio_set_direction(ILI9486_RST, GPIO_MODE_OUTPUT);
#endif

#if ILI9486_ENABLE_BACKLIGHT_CONTROL
    gpio_pad_select_gpio(ILI9486_BCKL);
    gpio_set_direction(ILI9486_BCKL, GPIO_MODE_OUTPUT);
#endif

#if ILI9486_USE_RST
	//Reset the display
	gpio_set_level(ILI9486_RST, 0);
	vTaskDelay(100 / portTICK_RATE_MS);
	gpio_set_level(ILI9486_RST, 1);
	vTaskDelay(100 / portTICK_RATE_MS);
#endif

	ESP_LOGI(TAG, "ILI9486 Initialization.");

	//Send all the commands
	uint16_t cmd = 0;
	while (ili_init_cmds[cmd].databytes!=0xff) {
		ili9486_send_cmd(ili_init_cmds[cmd].cmd);
		ili9486_send_data(ili_init_cmds[cmd].data, ili_init_cmds[cmd].databytes&0x1F);
		if (ili_init_cmds[cmd].databytes & 0x80) {
			vTaskDelay(100 / portTICK_RATE_MS);
		}
		cmd++;
	}

	ili9486_enable_backlight(true);

        ili9486_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
}

void ili9486_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map)
{
	uint8_t data[4] = {0};
    uint32_t size = 0;

	/*Column addresses*/
	ili9486_send_cmd(0x2A);
	data[0] = (area->x1 >> 8) & 0xFF;
	data[1] = area->x1 & 0xFF;
	data[2] = (area->x2 >> 8) & 0xFF;
	data[3] = area->x2 & 0xFF;
	ili9486_send_data(data, 4);

	/*Page addresses*/
	ili9486_send_cmd(0x2B);
	data[0] = (area->y1 >> 8) & 0xFF;
	data[1] = area->y1 & 0xFF;
	data[2] = (area->y2 >> 8) & 0xFF;
	data[3] = area->y2 & 0xFF;
	ili9486_send_data(data, 4);

	/*Memory write*/
	ili9486_send_cmd(0x2C);

	size = lv_area_get_width(area) * lv_area_get_height(area);

    ili9486_send_color((void*) color_map, size * 2);
}

void ili9486_enable_backlight(bool backlight)
{
#if ILI9486_ENABLE_BACKLIGHT_CONTROL
    ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
    uint32_t tmp = 0;

#if (ILI9486_BCKL_ACTIVE_LVL==1)
    tmp = backlight ? 1 : 0;
#else
    tmp = backlight ? 0 : 1;
#endif

    gpio_set_level(ILI9486_BCKL, tmp);
#endif
}

/**********************
 *   STATIC FUNCTIONS
 **********************/
static void ili9486_send_cmd(uint8_t cmd)
{
	uint8_t to16bit[] = {
	    0x00, cmd
        };

	disp_wait_for_pending_transactions();
	gpio_set_level(ILI9486_DC, 0);	 /*Command mode*/
	disp_spi_send_data(to16bit, sizeof to16bit);
}

static void ili9486_send_data(void * data, uint16_t length)
{
	uint32_t i;
	uint8_t to16bit[32];
	uint8_t * dummy = data;

	for(i=0; i < (length); i++)
	{
	  to16bit[2*i+1] = dummy[i];
	  to16bit[2*i] = 0x00;
	}

	disp_wait_for_pending_transactions();
	gpio_set_level(ILI9486_DC, 1);	 /*Data mode*/
	disp_spi_send_data(to16bit, (length*2));
}

static void ili9486_send_color(void * data, uint16_t length)
{
    disp_wait_for_pending_transactions();
    gpio_set_level(ILI9486_DC, 1);   /*Data mode*/
    disp_spi_send_colors(data, length);
}

static void ili9486_set_orientation(uint8_t orientation)
{
    // ESP_ASSERT(orientation < 4);

    const char *orientation_str[] = {
        "PORTRAIT", "PORTRAIT_INVERTED", "LANDSCAPE", "LANDSCAPE_INVERTED"
    };

    ESP_LOGI(TAG, "Display orientation: %s", orientation_str[orientation]);

#if defined (CONFIG_LV_PREDEFINED_DISPLAY_NONE)
    uint8_t data[] = {0x48, 0x88, 0x28, 0xE8};
#endif

    ESP_LOGI(TAG, "0x36 command value: 0x%02X", data[orientation]);

    ili9486_send_cmd(0x36);
    ili9486_send_data((void *) &data[orientation], 1);
}