lvgl_esp32_drivers/lvgl_helpers.c

/**
 * @file lvgl_helpers.c
 *
 */

/*********************
 *      INCLUDES
 *********************/
#include "sdkconfig.h"
#include "lvgl_helpers.h"
#include "esp_log.h"

#include "lvgl_tft/disp_spi.h"
#include "lvgl_touch/tp_spi.h"

#include "lvgl_spi_conf.h"

#include "lvgl_i2c/i2c_manager.h"

#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif

/*********************
 *      DEFINES
 *********************/

 #define TAG "lvgl_helpers"

/**********************
 *      TYPEDEFS
 **********************/

/**********************
 *  STATIC PROTOTYPES
 **********************/

/**********************
 *  STATIC VARIABLES
 **********************/

/**********************
 *      MACROS
 **********************/

/**********************
 *   GLOBAL FUNCTIONS
 **********************/

/* Interface and driver initialization */
void lvgl_driver_init(void)
{
    /* Since LVGL v8 LV_HOR_RES_MAX and LV_VER_RES_MAX are not defined, so
     * print it only if they are defined. */
#if (LVGL_VERSION_MAJOR < 8)
    ESP_LOGI(TAG, "Display hor size: %d, ver size: %d", LV_HOR_RES_MAX, LV_VER_RES_MAX);
#endif

    ESP_LOGI(TAG, "Display buffer size: %d", DISP_BUF_SIZE);

#if defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X)
    ESP_LOGI(TAG, "Initializing SPI master for FT81X");

    lvgl_spi_driver_init(TFT_SPI_HOST,
        DISP_SPI_MISO, DISP_SPI_MOSI, DISP_SPI_CLK,
        SPI_BUS_MAX_TRANSFER_SZ, 1,
        DISP_SPI_IO2, DISP_SPI_IO3);

    disp_spi_add_device(TFT_SPI_HOST);

#if defined (CONFIG_LV_TOUCH_CONTROLLER_FT81X)
    touch_driver_init();
#endif

    return;
#endif

#if defined (SHARED_SPI_BUS)
    ESP_LOGI(TAG, "Initializing shared SPI master");

    lvgl_spi_driver_init(TFT_SPI_HOST,
        TP_SPI_MISO, DISP_SPI_MOSI, DISP_SPI_CLK,
        SPI_BUS_MAX_TRANSFER_SZ, 1,
        -1, -1);

    disp_spi_add_device(TFT_SPI_HOST);
    tp_spi_add_device(TOUCH_SPI_HOST);

    touch_driver_init();

    return;
#endif

/* Display controller initialization */
#if defined CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI
    ESP_LOGI(TAG, "Initializing SPI master for display");

    lvgl_spi_driver_init(TFT_SPI_HOST,
        DISP_SPI_MISO, DISP_SPI_MOSI, DISP_SPI_CLK,
        SPI_BUS_MAX_TRANSFER_SZ, 1,
        DISP_SPI_IO2, DISP_SPI_IO3);

    disp_spi_add_device(TFT_SPI_HOST);
#elif defined (CONFIG_LV_I2C_DISPLAY)
#else
#error "No protocol defined for display controller"
#endif

/* Touch controller initialization */
#if CONFIG_LV_TOUCH_CONTROLLER != TOUCH_CONTROLLER_NONE
    #if defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI)
        ESP_LOGI(TAG, "Initializing SPI master for touch");

        lvgl_spi_driver_init(TOUCH_SPI_HOST,
            TP_SPI_MISO, TP_SPI_MOSI, TP_SPI_CLK,
            0 /* Defaults to 4094 */, 2,
            -1, -1);

        tp_spi_add_device(TOUCH_SPI_HOST);

        touch_driver_init();
    #elif defined (CONFIG_LV_I2C_TOUCH)
        touch_driver_init();
    #elif defined (CONFIG_LV_TOUCH_DRIVER_ADC)
        touch_driver_init();
    #elif defined (CONFIG_LV_TOUCH_DRIVER_DISPLAY)
        touch_driver_init();
    #else
    #error "No protocol defined for touch controller"
    #endif
#else
#endif
}

void display_bsp_init_io(void)
{
    esp_err_t err = ESP_OK;
    gpio_config_t io_conf;

#ifdef CONFIG_LV_DISPLAY_USE_DC
    io_conf.mode = GPIO_MODE_OUTPUT;
    io_conf.pin_bit_mask = (1ULL << CONFIG_LV_DISP_PIN_DC);
    err = gpio_config(&io_conf);
    ESP_ERROR_CHECK(err);
#endif

#ifdef CONFIG_LV_DISP_USE_RST
    io_conf.mode = GPIO_MODE_OUTPUT;
    io_conf.pin_bit_mask = (1ULL << CONFIG_LV_DISP_PIN_RST);
    err = gpio_config(&io_conf);
    ESP_ERROR_CHECK(err);
#endif

#ifndef CONFIG_LV_DISP_BACKLIGHT_OFF
    io_conf.mode = GPIO_MODE_OUTPUT;
    io_conf.pin_bit_mask = (1ULL << CONFIG_LV_DISP_PIN_BCKL);
    err = gpio_config(&io_conf);
    ESP_ERROR_CHECK(err);
#endif

#ifdef CONFIG_LV_DISP_PIN_BUSY
    io_conf.mode = GPIO_MODE_INPUT;
    io_conf.pin_bit_mask = (1ULL << CONFIG_LV_DISP_PIN_BUSY);
    err = gpio_config(&io_conf);
    ESP_ERROR_CHECK(err);
#endif
}

/* Initialize spi bus master
 *
 * NOTE: dma_chan type and value changed to int instead of spi_dma_chan_t
 * for backwards compatibility with ESP-IDF versions prior v4.3.
 *
 * We could use the ESP_IDF_VERSION_VAL macro available in the "esp_idf_version.h"
 * header available since ESP-IDF v4.
 */
bool lvgl_spi_driver_init(int host,
    int miso_pin, int mosi_pin, int sclk_pin,
    int max_transfer_sz,
    int dma_channel,
    int quadwp_pin, int quadhd_pin)
{
    int dma_chan = 0 /* SPI_DMA_DISABLED */;

#if defined (CONFIG_IDF_TARGET_ESP32)
    assert((SPI_HOST <= host) && (VSPI_HOST >= host));
    const char *spi_names[] = {
        "SPI_HOST", "HSPI_HOST", "VSPI_HOST"
    };

    dma_chan = dma_channel;
#elif defined (CONFIG_IDF_TARGET_ESP32S2)
    assert((SPI_HOST <= host) && (HSPI_HOST >= host));
    const char *spi_names[] = {
        "SPI_HOST", "", ""
    };

    dma_chan = dma_channel;
#elif defined (CONFIG_IDF_TARGET_ESP32C3)
    assert((SPI1_HOST <= host) && (SPI3_HOST >= host));
    const char *spi_names[] = {
        "SPI1_HOST", "SPI2_HOST", "SPI3_HOST"
    };

    dma_chan = 3 /* SPI_DMA_CH_AUTO */;
#else
#error "Target chip not selected"
#endif

    ESP_LOGI(TAG, "Configuring SPI host %s (%d)", spi_names[host], host);
    ESP_LOGI(TAG, "MISO pin: %d, MOSI pin: %d, SCLK pin: %d, IO2/WP pin: %d, IO3/HD pin: %d",
        miso_pin, mosi_pin, sclk_pin, quadwp_pin, quadhd_pin);

    ESP_LOGI(TAG, "Max transfer size: %d (bytes)", max_transfer_sz);

    spi_bus_config_t buscfg = {
        .miso_io_num = miso_pin,
	.mosi_io_num = mosi_pin,
	.sclk_io_num = sclk_pin,
	.quadwp_io_num = quadwp_pin,
	.quadhd_io_num = quadhd_pin,
        .max_transfer_sz = max_transfer_sz
    };

    ESP_LOGI(TAG, "Initializing SPI bus...");
    esp_err_t ret = spi_bus_initialize(host, &buscfg, dma_chan);
    assert(ret == ESP_OK);

    return ESP_OK != ret;
}