fix print lines
This commit is contained in:
parent
2978b21f17
commit
f9b9d6e829
|
@ -133,7 +133,7 @@ esp_err_t I2C_FN(_init)(i2c_port_t port) {
|
|||
I2C_FN(_mutex)[port] = xSemaphoreCreateMutex();
|
||||
|
||||
i2c_config_t conf = {0};
|
||||
|
||||
|
||||
#ifdef HAS_CLK_FLAGS
|
||||
conf.clk_flags = 0;
|
||||
#endif
|
||||
|
@ -168,7 +168,7 @@ esp_err_t I2C_FN(_init)(i2c_port_t port) {
|
|||
ESP_LOGW(TAG, "If it was already open, we'll use it with whatever settings were used "
|
||||
"to open it. See I2C Manager README for details.");
|
||||
} else {
|
||||
ESP_LOGI(TAG, "Initialised port %d (SDA: %d, SCL: %d, speed: %d Hz.)",
|
||||
ESP_LOGI(TAG, "Initialised port %d (SDA: %d, SCL: %d, speed: %lu Hz.)",
|
||||
port, conf.sda_io_num, conf.scl_io_num, conf.master.clk_speed);
|
||||
}
|
||||
|
||||
|
@ -186,7 +186,7 @@ esp_err_t I2C_FN(_read)(i2c_port_t port, uint16_t addr, uint32_t reg, uint8_t *b
|
|||
// May seem weird, but init starts with a check if it's needed, no need for that check twice.
|
||||
I2C_FN(_init)(port);
|
||||
|
||||
ESP_LOGV(TAG, "Reading port %d, addr 0x%03x, reg 0x%04x", port, addr, reg);
|
||||
ESP_LOGV(TAG, "Reading port %d, addr 0x%03x, reg 0x%04lx", port, addr, reg);
|
||||
|
||||
TickType_t timeout = 0;
|
||||
#if defined (I2C_ZERO)
|
||||
|
@ -239,7 +239,7 @@ esp_err_t I2C_FN(_write)(i2c_port_t port, uint16_t addr, uint32_t reg, const uin
|
|||
// May seem weird, but init starts with a check if it's needed, no need for that check twice.
|
||||
I2C_FN(_init)(port);
|
||||
|
||||
ESP_LOGV(TAG, "Writing port %d, addr 0x%03x, reg 0x%04x", port, addr, reg);
|
||||
ESP_LOGV(TAG, "Writing port %d, addr 0x%03x, reg 0x%04lx", port, addr, reg);
|
||||
|
||||
TickType_t timeout = 0;
|
||||
#if defined (I2C_ZERO)
|
||||
|
|
Loading…
Reference in a new issue