I2C Manager Kconfig now generic
This commit is contained in:
Rop Gonggrijp
parent
048438738c
commit
ef76fd1056
7
Kconfig
7
Kconfig
|
|
@ -4,6 +4,11 @@ menu "LVGL ESP Drivers"
|
|||
|
||||
rsource "lvgl_touch/Kconfig"
|
||||
|
||||
rsource "i2c_manager/Kconfig"
|
||||
menu "I2C Port Settings"
|
||||
depends on LV_I2C && !HAVE_I2C_MANAGER
|
||||
|
||||
rsource "i2c_manager/Kconfig"
|
||||
|
||||
endmenu
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -1,102 +1,96 @@
|
|||
menu "I2C Port Settings"
|
||||
depends on LV_I2C && !HAVE_I2C_MANAGER
|
||||
menu "I2C Port 0"
|
||||
|
||||
menu "I2C Port 0"
|
||||
config I2C_MANAGER_0_ENABLED
|
||||
bool "Enable I2C port 0"
|
||||
|
||||
config I2C_MANAGER_0_ENABLED
|
||||
bool "Enable I2C port 0"
|
||||
|
||||
if I2C_MANAGER_0_ENABLED
|
||||
config I2C_MANAGER_0_SDA
|
||||
int "SDA (GPIO pin)"
|
||||
config I2C_MANAGER_0_SCL
|
||||
int "SCL (GPIO pin)"
|
||||
config I2C_MANAGER_0_FREQ_HZ
|
||||
int "Frequency (Hz)"
|
||||
default 400000
|
||||
range 100000 5000000
|
||||
help
|
||||
The clock speed in Hz. Ranges from 100000 (100 kHz) to
|
||||
5000000 (5 Mhz). I2C busses that involve external wires may
|
||||
have to be slower, and the real maximum speed the bus will
|
||||
support depends on the value of the pullup resistors and the
|
||||
design of the overall circuit.
|
||||
config I2C_MANAGER_0_TIMEOUT
|
||||
int "R/W timeout (ms)"
|
||||
default 20
|
||||
range 10 1000
|
||||
help
|
||||
Timeout for I2C read and write operations. This does not
|
||||
include the time waiting for a lock.
|
||||
config I2C_MANAGER_0_LOCK_TIMEOUT
|
||||
int "Stale lock override (ms)"
|
||||
default 50
|
||||
range 10 1000
|
||||
help
|
||||
Timeout at which point an operation waiting for its turn on
|
||||
the port will assume that whatever set the lock has died and
|
||||
overrides it. Set this somewhat larger than the previous
|
||||
timeout.
|
||||
config I2C_MANAGER_0_PULLUPS
|
||||
bool "Use ESP32 built-in bus pull-up resistors"
|
||||
help
|
||||
The I2C bus needs resistors to make sure it's in a defined
|
||||
state when nobody is talking. Many circuits have external
|
||||
pullup resistors already and turning these on will increase
|
||||
power consumption slightly and may limit the speed your bus
|
||||
can attain. Try with these off first if you don't know.
|
||||
endif
|
||||
|
||||
endmenu
|
||||
|
||||
|
||||
menu "I2C Port 1"
|
||||
|
||||
config I2C_MANAGER_1_ENABLED
|
||||
bool "Enable I2C port 1"
|
||||
|
||||
if I2C_MANAGER_1_ENABLED
|
||||
config I2C_MANAGER_1_SDA
|
||||
int "SDA (GPIO pin)"
|
||||
config I2C_MANAGER_1_SCL
|
||||
int "SCL (GPIO pin)"
|
||||
config I2C_MANAGER_1_FREQ_HZ
|
||||
int "Frequency (Hz)"
|
||||
default 1000000
|
||||
range 100000 5000000
|
||||
help
|
||||
The clock speed in Hz. Ranges from 100000 (100 kHz) to
|
||||
5000000 (5 Mhz). I2C busses that involve external wires may
|
||||
have to be slower, and the real maximum speed the bus will
|
||||
support depends on the value of the pullup resistors and the
|
||||
design of the overall circuit.
|
||||
config I2C_MANAGER_1_TIMEOUT
|
||||
int "R/W timeout (ms)"
|
||||
default 20
|
||||
range 10 1000
|
||||
help
|
||||
Timeout for I2C read and write operations. This does not
|
||||
include the time waiting for a lock. Default should be fine.
|
||||
config I2C_MANAGER_1_LOCK_TIMEOUT
|
||||
int "Stale lock override (ms)"
|
||||
default 50
|
||||
help
|
||||
Timeout at which point an operation waiting for its turn on
|
||||
the port will assume that whatever set the lock has died and
|
||||
overrides it. Set this somewhat larger than the previous
|
||||
timeout. Default should be fine.
|
||||
range 30 1000
|
||||
config I2C_MANAGER_1_PULLUPS
|
||||
bool "Use ESP32 built-in bus pull-up resistors"
|
||||
help
|
||||
The I2C bus needs resistors to make sure it's in a defined
|
||||
state when nobody is talking. Many circuits have external
|
||||
pullup resistors already and turning these on will increase
|
||||
power consumption slightly and may limit the speed your bus
|
||||
can attain. Try with these off first if you don't know.
|
||||
endif
|
||||
|
||||
endmenu
|
||||
if I2C_MANAGER_0_ENABLED
|
||||
config I2C_MANAGER_0_SDA
|
||||
int "SDA (GPIO pin)"
|
||||
config I2C_MANAGER_0_SCL
|
||||
int "SCL (GPIO pin)"
|
||||
config I2C_MANAGER_0_FREQ_HZ
|
||||
int "Frequency (Hz)"
|
||||
default 400000
|
||||
range 100000 5000000
|
||||
help
|
||||
The clock speed in Hz. Ranges from 100000 (100 kHz) to
|
||||
5000000 (5 Mhz). I2C busses that involve external wires may
|
||||
have to be slower, and the real maximum speed the bus will
|
||||
support depends on the value of the pullup resistors and the
|
||||
design of the overall circuit.
|
||||
config I2C_MANAGER_0_TIMEOUT
|
||||
int "R/W timeout (ms)"
|
||||
default 20
|
||||
range 10 1000
|
||||
help
|
||||
Timeout for I2C read and write operations. This does not
|
||||
include the time waiting for a lock.
|
||||
config I2C_MANAGER_0_LOCK_TIMEOUT
|
||||
int "Stale lock override (ms)"
|
||||
default 50
|
||||
range 10 1000
|
||||
help
|
||||
Timeout at which point an operation waiting for its turn on
|
||||
the port will assume that whatever set the lock has died and
|
||||
overrides it. Set this somewhat larger than the previous
|
||||
timeout.
|
||||
config I2C_MANAGER_0_PULLUPS
|
||||
bool "Use ESP32 built-in bus pull-up resistors"
|
||||
help
|
||||
The I2C bus needs resistors to make sure it's in a defined
|
||||
state when nobody is talking. Many circuits have external
|
||||
pullup resistors already and turning these on will increase
|
||||
power consumption slightly and may limit the speed your bus
|
||||
can attain. Try with these off first if you don't know.
|
||||
endif
|
||||
|
||||
endmenu
|
||||
|
||||
|
||||
menu "I2C Port 1"
|
||||
|
||||
config I2C_MANAGER_1_ENABLED
|
||||
bool "Enable I2C port 1"
|
||||
|
||||
if I2C_MANAGER_1_ENABLED
|
||||
config I2C_MANAGER_1_SDA
|
||||
int "SDA (GPIO pin)"
|
||||
config I2C_MANAGER_1_SCL
|
||||
int "SCL (GPIO pin)"
|
||||
config I2C_MANAGER_1_FREQ_HZ
|
||||
int "Frequency (Hz)"
|
||||
default 1000000
|
||||
range 100000 5000000
|
||||
help
|
||||
The clock speed in Hz. Ranges from 100000 (100 kHz) to
|
||||
5000000 (5 Mhz). I2C busses that involve external wires may
|
||||
have to be slower, and the real maximum speed the bus will
|
||||
support depends on the value of the pullup resistors and the
|
||||
design of the overall circuit.
|
||||
config I2C_MANAGER_1_TIMEOUT
|
||||
int "R/W timeout (ms)"
|
||||
default 20
|
||||
range 10 1000
|
||||
help
|
||||
Timeout for I2C read and write operations. This does not
|
||||
include the time waiting for a lock. Default should be fine.
|
||||
config I2C_MANAGER_1_LOCK_TIMEOUT
|
||||
int "Stale lock override (ms)"
|
||||
default 50
|
||||
help
|
||||
Timeout at which point an operation waiting for its turn on
|
||||
the port will assume that whatever set the lock has died and
|
||||
overrides it. Set this somewhat larger than the previous
|
||||
timeout. Default should be fine.
|
||||
range 30 1000
|
||||
config I2C_MANAGER_1_PULLUPS
|
||||
bool "Use ESP32 built-in bus pull-up resistors"
|
||||
help
|
||||
The I2C bus needs resistors to make sure it's in a defined
|
||||
state when nobody is talking. Many circuits have external
|
||||
pullup resistors already and turning these on will increase
|
||||
power consumption slightly and may limit the speed your bus
|
||||
can attain. Try with these off first if you don't know.
|
||||
endif
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
Loading…
Reference in a new issue