diff --git a/lvgl_helpers.c b/lvgl_helpers.c
index b5d23e2..886d941 100644
--- a/lvgl_helpers.c
+++ b/lvgl_helpers.c
@@ -82,14 +82,6 @@ void lvgl_interface_init(void)
 
     ESP_LOGI(TAG, "Display buffer size: %d", display_buffer_size);
 
-    /* SPI DMA Channel selection
-     * SPI_DMA_CH1 is only defined for ESP32, so let the driver choose which
-     * channel to use, and use the proven channel 1 on esp32 targets */
-    int dma_channel = 3;
-#if defined (CONFIG_IDF_TARGET_ESP32)
-    dma_channel = 1;
-#endif
-
 #if defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X)
     init_ft81x(dma_channel);
     return;
@@ -107,8 +99,9 @@ void lvgl_interface_init(void)
     miso = TP_SPI_MISO;
 #endif
 
+    // We use DMA channel 1 for all cases
     lvgl_spi_driver_init(TFT_SPI_HOST, miso, DISP_SPI_MOSI, DISP_SPI_CLK,
-        spi_max_transfer_size, dma_channel, DISP_SPI_IO2, DISP_SPI_IO3);
+        spi_max_transfer_size, 1, DISP_SPI_IO2, DISP_SPI_IO3);
 
     disp_spi_add_device(TFT_SPI_HOST);
 
@@ -267,12 +260,6 @@ bool lvgl_spi_driver_init(int host,
     int dma_channel,
     int quadwp_pin, int quadhd_pin)
 {
-#if defined (SPI_HOST_MAX)
-    assert((SPI1_HOST <= host) && (SPI_HOST_MAX > host));
-#else
-    assert((SPI1_HOST <= host) && ((SPI3_HOST + 1) > host));
-#endif
-
     const char *spi_names[] = {
         "SPI1_HOST", "SPI2_HOST", "SPI3_HOST"
     };
@@ -293,13 +280,7 @@ bool lvgl_spi_driver_init(int host,
     };
 
     ESP_LOGI(TAG, "Initializing SPI bus...");
-
-#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 3, 0)
-    esp_err_t ret = spi_bus_initialize((spi_host_device_t) host, &buscfg, (spi_dma_chan_t)dma_channel);
-#else
-    esp_err_t ret = spi_bus_initialize(host, &buscfg, dma_channel);
-#endif
-    
+    esp_err_t ret = spi_bus_initialize((spi_host_device_t) host, &buscfg, dma_channel);
     assert(ret == ESP_OK);
 
     return ESP_OK != ret;
@@ -308,7 +289,7 @@ bool lvgl_spi_driver_init(int host,
 static int calculate_spi_max_transfer_size(const int display_buffer_size)
 {
     int retval = 0;
-    
+
 #if defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9481) || \
     defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9488)
     retval = display_buffer_size * 3;
@@ -325,7 +306,7 @@ static int calculate_spi_max_transfer_size(const int display_buffer_size)
 #else
     retval = display_buffer_size * 2;
 #endif
-    
+
     return retval;
 }
 
diff --git a/lvgl_spi_conf.h b/lvgl_spi_conf.h
index 7a333fe..1abf623 100644
--- a/lvgl_spi_conf.h
+++ b/lvgl_spi_conf.h
@@ -112,7 +112,11 @@ extern "C" {
  * If the user sets the same MOSI and CLK pins for both display and indev
  * controllers then we can assume the user is using the same SPI bus
  * If so verify the user specified the same SPI bus for both */
-#if !defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X)
+#if defined (CONFIG_LV_TOUCH_CONTROLLER_SPI2_HOST)
+#define TOUCH_SPI_HOST SPI2_HOST
+#elif defined (CONFIG_LV_TOUCH_CONTROLLER_SPI3_HOST)
+#define TOUCH_SPI_HOST SPI3_HOST
+#endif
 
 #if defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI) && \
             (CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI == 1) && \
@@ -170,7 +174,6 @@ extern "C" {
 #else
 #define SPI_TFT_SPI_MODE    (0U)
 #endif
-#endif
 
 /* Touch driver */
 #if (CONFIG_LV_TOUCH_CONTROLLER == TOUCH_CONTROLLER_STMPE610)
diff --git a/lvgl_tft/Kconfig b/lvgl_tft/Kconfig
index 80922ac..78c8534 100644
--- a/lvgl_tft/Kconfig
+++ b/lvgl_tft/Kconfig
@@ -469,8 +469,9 @@ menu "LVGL TFT Display controller"
 
     choice
         prompt "TFT SPI Bus." if LV_TFT_DISPLAY_PROTOCOL_SPI
-        default LV_TFT_DISPLAY_SPI2_HOST if LV_PREDEFINED_DISPLAY_TTGO
-        default LV_TFT_DISPLAY_SPI3_HOST if !LV_PREDEFINED_DISPLAY_TTGO
+        default LV_TFT_DISPLAY_SPI2_HOST
+        help
+              Select the SPI Bus the TFT Display is attached to.
 
         config LV_TFT_DISPLAY_SPI2_HOST
             bool "SPI2_HOST"