Merge pull request #23 from lvgl/feat/ssd1306_partial_update
Feat/ssd1306 partial update
This commit is contained in:
Carlos Diaz
GitHub
commit
c9644967a7
|
|
@ -40,7 +40,7 @@ extern "C" {
|
|||
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9341
|
||||
#define DISP_BUF_SIZE (LV_HOR_RES_MAX * 64)
|
||||
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_SSD1306
|
||||
#define DISP_BUF_SIZE (LV_HOR_RES_MAX*LV_VER_RES_MAX)
|
||||
#define DISP_BUF_SIZE (LV_HOR_RES_MAX * (LV_VER_RES_MAX / 8))
|
||||
#elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X)
|
||||
#define DISP_BUF_LINES 40
|
||||
#define DISP_BUF_SIZE (LV_HOR_RES_MAX * DISP_BUF_LINES)
|
||||
|
|
|
|||
|
|
@ -1,30 +1,30 @@
|
|||
/**
|
||||
* @file ssd1306.c
|
||||
*
|
||||
* Code from https://github.com/yanbe/ssd1306-esp-idf-i2c.git is used as a starting point,
|
||||
* in addition to code from https://github.com/espressif/esp-iot-solution.
|
||||
*
|
||||
* Definitions are borrowed from:
|
||||
* http://robotcantalk.blogspot.com/2015/03/interfacing-arduino-with-ssd1306-driven.html
|
||||
*
|
||||
* For LVGL the forum has been used, in particular: https://blog.littlevgl.com/2019-05-06/oled
|
||||
*/
|
||||
|
||||
/*********************
|
||||
* INCLUDES
|
||||
*********************/
|
||||
#include "ssd1306.h"
|
||||
#include "driver/i2c.h"
|
||||
#include "disp_spi.h"
|
||||
#include "driver/gpio.h"
|
||||
#include "esp_log.h"
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "assert.h"
|
||||
|
||||
#include "lvgl_i2c_conf.h"
|
||||
|
||||
#include "ssd1306.h"
|
||||
|
||||
/*********************
|
||||
* DEFINES
|
||||
*********************/
|
||||
#define TAG "SSD1306"
|
||||
|
||||
// Code from https://github.com/yanbe/ssd1306-esp-idf-i2c.git is used as a starting point,
|
||||
// in addition to code from https://github.com/espressif/esp-iot-solution.
|
||||
// Following definitions are borrowed from
|
||||
// http://robotcantalk.blogspot.com/2015/03/interfacing-arduino-with-ssd1306-driven.html
|
||||
// For LittlevGL the forum has been used, in particular: https://blog.littlevgl.com/2019-05-06/oled
|
||||
|
||||
// SLA (0x3C) + WRITE_MODE (0x00) = 0x78 (0b01111000)
|
||||
#define OLED_I2C_ADDRESS 0x3C
|
||||
#define OLED_WIDTH 128
|
||||
|
|
@ -79,6 +79,8 @@
|
|||
/**********************
|
||||
* STATIC PROTOTYPES
|
||||
**********************/
|
||||
static uint8_t send_data(lv_disp_drv_t *disp_drv, void *bytes, size_t bytes_len);
|
||||
static uint8_t send_pixels(lv_disp_drv_t *disp_drv, void *color_buffer, size_t buffer_len);
|
||||
|
||||
/**********************
|
||||
* STATIC VARIABLES
|
||||
|
|
@ -94,53 +96,48 @@
|
|||
/**********************
|
||||
* GLOBAL FUNCTIONS
|
||||
**********************/
|
||||
void ssd1306_init()
|
||||
void ssd1306_init(void)
|
||||
{
|
||||
esp_err_t ret;
|
||||
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
|
||||
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
|
||||
i2c_master_write_byte(cmd, OLED_CONTROL_BYTE_CMD_STREAM, true);
|
||||
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_CHARGE_PUMP, true);
|
||||
i2c_master_write_byte(cmd, 0x14, true);
|
||||
uint8_t orientation_1 = 0;
|
||||
uint8_t orientation_2 = 0;
|
||||
|
||||
#if defined (CONFIG_DISPLAY_ORIENTATION_PORTRAIT)
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_SEGMENT_REMAP, true);
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_COM_SCAN_MODE_REMAP, true);
|
||||
orientation_1 = OLED_CMD_SET_SEGMENT_REMAP;
|
||||
orientation_2 = OLED_CMD_SET_COM_SCAN_MODE_REMAP;
|
||||
#elif defined (CONFIG_DISPLAY_ORIENTATION_PORTRAIT_INVERTED)
|
||||
i2c_master_write_byte(cmd, 0xA0, true);
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_COM_SCAN_MODE_NORMAL, true);
|
||||
orientation_1 = 0xA0;
|
||||
orientation_2 = OLED_CMD_SET_COM_SCAN_MODE_NORMAL;
|
||||
#else
|
||||
#error "Unsopported orientation"
|
||||
#error "Unsupported orientation"
|
||||
#endif
|
||||
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_CONTRAST, true);
|
||||
uint8_t display_mode = 0;
|
||||
|
||||
#if defined CONFIG_LV_INVERT_DISPLAY
|
||||
i2c_master_write_byte(cmd, OLED_CMD_DISPLAY_INVERTED, true); // Inverted display
|
||||
display_mode = OLED_CMD_DISPLAY_INVERTED;
|
||||
#else
|
||||
i2c_master_write_byte(cmd, OLED_CMD_DISPLAY_NORMAL, true); // Non-inverted display
|
||||
display_mode = OLED_CMD_DISPLAY_NORMAL;
|
||||
#endif
|
||||
|
||||
uint8_t conf[] = {
|
||||
OLED_CONTROL_BYTE_CMD_STREAM,
|
||||
OLED_CMD_SET_CHARGE_PUMP,
|
||||
0x14,
|
||||
orientation_1,
|
||||
orientation_2,
|
||||
OLED_CMD_SET_CONTRAST,
|
||||
display_mode,
|
||||
0xFF,
|
||||
OLED_CMD_DISPLAY_ON
|
||||
};
|
||||
|
||||
i2c_master_write_byte(cmd, 0xFF, true);
|
||||
|
||||
i2c_master_write_byte(cmd, OLED_CMD_DISPLAY_ON, true);
|
||||
i2c_master_stop(cmd);
|
||||
|
||||
ret = i2c_master_cmd_begin(I2C_NUM_0, cmd, 10/portTICK_PERIOD_MS);
|
||||
if (ret == ESP_OK) {
|
||||
ESP_LOGI(TAG, "OLED configured successfully");
|
||||
} else {
|
||||
ESP_LOGE(TAG, "OLED configuration failed. code: 0x%.2X", ret);
|
||||
}
|
||||
i2c_cmd_link_delete(cmd);
|
||||
uint8_t err = send_data(NULL, conf, sizeof(conf));
|
||||
assert(0 == err);
|
||||
}
|
||||
|
||||
void ssd1306_set_px_cb(lv_disp_drv_t * disp_drv, uint8_t * buf, lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
|
||||
lv_color_t color, lv_opa_t opa) {
|
||||
lv_color_t color, lv_opa_t opa)
|
||||
{
|
||||
uint16_t byte_index = x + (( y>>3 ) * buf_w);
|
||||
uint8_t bit_index = y & 0x7;
|
||||
|
||||
|
|
@ -153,96 +150,102 @@ void ssd1306_set_px_cb(lv_disp_drv_t * disp_drv, uint8_t * buf, lv_coord_t buf_w
|
|||
|
||||
void ssd1306_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_p)
|
||||
{
|
||||
uint8_t row1 = 0, row2 = 0;
|
||||
i2c_cmd_handle_t cmd;
|
||||
/* Divide by 8 */
|
||||
uint8_t row1 = area->y1 >> 3;
|
||||
uint8_t row2 = area->y2 >> 3;
|
||||
|
||||
// Divide by 8
|
||||
row1 = area->y1 >> 3;
|
||||
row2 = area->y2 >> 3;
|
||||
uint8_t conf[] = {
|
||||
OLED_CONTROL_BYTE_CMD_STREAM,
|
||||
OLED_CMD_SET_MEMORY_ADDR_MODE,
|
||||
0x00,
|
||||
OLED_CMD_SET_COLUMN_RANGE,
|
||||
(uint8_t) area->x1,
|
||||
(uint8_t) area->x2,
|
||||
OLED_CMD_SET_PAGE_RANGE,
|
||||
row1,
|
||||
row2,
|
||||
};
|
||||
|
||||
cmd = i2c_cmd_link_create();
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
|
||||
|
||||
i2c_master_write_byte(cmd, OLED_CONTROL_BYTE_CMD_STREAM, true);
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_MEMORY_ADDR_MODE, true);
|
||||
i2c_master_write_byte(cmd, 0x00, true);
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_COLUMN_RANGE, true);
|
||||
i2c_master_write_byte(cmd, area->x1, true);
|
||||
i2c_master_write_byte(cmd, area->x2, true);
|
||||
i2c_master_write_byte(cmd, OLED_CMD_SET_PAGE_RANGE, true);
|
||||
i2c_master_write_byte(cmd, row1, true);
|
||||
i2c_master_write_byte(cmd, row2, true);
|
||||
i2c_master_stop(cmd);
|
||||
i2c_master_cmd_begin(I2C_NUM_0, cmd, 10/portTICK_PERIOD_MS);
|
||||
i2c_cmd_link_delete(cmd);
|
||||
|
||||
cmd = i2c_cmd_link_create();
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
|
||||
|
||||
i2c_master_write_byte(cmd, OLED_CONTROL_BYTE_DATA_STREAM, true);
|
||||
i2c_master_write(cmd, (uint8_t *)color_p, OLED_COLUMNS * (1+row2-row1), true);
|
||||
i2c_master_stop(cmd);
|
||||
i2c_master_cmd_begin(I2C_NUM_0, cmd, 10/portTICK_PERIOD_MS);
|
||||
i2c_cmd_link_delete(cmd);
|
||||
uint8_t err = send_data(disp_drv, conf, sizeof(conf));
|
||||
assert(0 == err);
|
||||
err = send_pixels(disp_drv, color_p, OLED_COLUMNS * (1 + row2 - row1));
|
||||
assert(0 == err);
|
||||
|
||||
lv_disp_flush_ready(disp_drv);
|
||||
}
|
||||
|
||||
// workaround: always send complete size display buffer, no partial update
|
||||
void ssd1306_rounder(lv_disp_drv_t * disp_drv, lv_area_t *area)
|
||||
{
|
||||
// area->y1 = (area->y1 & (~0x7));
|
||||
// area->y2 = (area->y2 & (~0x7)) + 7;
|
||||
|
||||
uint8_t hor_max = disp_drv->hor_res;
|
||||
uint8_t ver_max = disp_drv->ver_res;
|
||||
|
||||
area->x1 = 0;
|
||||
area->y1 = 0;
|
||||
area->x2 = hor_max - 1;
|
||||
area->y2 = ver_max - 1;
|
||||
area->x1 = area->x1 & ~(0x07);
|
||||
area->x2 = area->x2 | 0x07;
|
||||
}
|
||||
|
||||
void ssd1306_sleep_in()
|
||||
void ssd1306_sleep_in(void)
|
||||
{
|
||||
esp_err_t ret;
|
||||
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
|
||||
uint8_t conf[] = {
|
||||
OLED_CONTROL_BYTE_CMD_STREAM,
|
||||
OLED_CMD_DISPLAY_OFF
|
||||
};
|
||||
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
|
||||
i2c_master_write_byte(cmd, OLED_CONTROL_BYTE_CMD_STREAM, true);
|
||||
|
||||
i2c_master_write_byte(cmd, OLED_CMD_DISPLAY_OFF, true);
|
||||
i2c_master_stop(cmd);
|
||||
|
||||
ret = i2c_master_cmd_begin(I2C_NUM_0, cmd, 10/portTICK_PERIOD_MS);
|
||||
if (ret != ESP_OK) {
|
||||
ESP_LOGE(TAG, "ssd1306_display_off configuration failed. code: 0x%.2X", ret);
|
||||
}
|
||||
i2c_cmd_link_delete(cmd);
|
||||
uint8_t err = send_data(NULL, conf, sizeof(conf));
|
||||
assert(0 == err);
|
||||
}
|
||||
|
||||
void ssd1306_sleep_out()
|
||||
void ssd1306_sleep_out(void)
|
||||
{
|
||||
esp_err_t ret;
|
||||
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
|
||||
uint8_t conf[] = {
|
||||
OLED_CONTROL_BYTE_CMD_STREAM,
|
||||
OLED_CMD_DISPLAY_ON
|
||||
};
|
||||
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
|
||||
i2c_master_write_byte(cmd, OLED_CONTROL_BYTE_CMD_STREAM, true);
|
||||
i2c_master_write_byte(cmd, OLED_CMD_DISPLAY_ON, true);
|
||||
i2c_master_stop(cmd);
|
||||
|
||||
ret = i2c_master_cmd_begin(I2C_NUM_0, cmd, 10/portTICK_PERIOD_MS);
|
||||
if (ret != ESP_OK) {
|
||||
ESP_LOGE(TAG, "ssd1306_display_on configuration failed. code: 0x%.2X", ret);
|
||||
}
|
||||
i2c_cmd_link_delete(cmd);
|
||||
uint8_t err = send_data(NULL, conf, sizeof(conf));
|
||||
assert(0 == err);
|
||||
}
|
||||
|
||||
/**********************
|
||||
* STATIC FUNCTIONS
|
||||
**********************/
|
||||
static uint8_t send_data(lv_disp_drv_t *disp_drv, void *bytes, size_t bytes_len)
|
||||
{
|
||||
(void) disp_drv;
|
||||
esp_err_t err;
|
||||
|
||||
uint8_t *data = (uint8_t *) bytes;
|
||||
|
||||
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
|
||||
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
|
||||
|
||||
for (size_t idx = 0; idx < bytes_len; idx++) {
|
||||
i2c_master_write_byte(cmd, data[idx], true);
|
||||
}
|
||||
|
||||
i2c_master_stop(cmd);
|
||||
|
||||
/* Send queued commands */
|
||||
err = i2c_master_cmd_begin(DISP_I2C_PORT, cmd, 10 / portTICK_PERIOD_MS);
|
||||
i2c_cmd_link_delete(cmd);
|
||||
|
||||
return ESP_OK == err ? 0 : 1;
|
||||
}
|
||||
|
||||
static uint8_t send_pixels(lv_disp_drv_t *disp_drv, void *color_buffer, size_t buffer_len)
|
||||
{
|
||||
(void) disp_drv;
|
||||
esp_err_t err;
|
||||
|
||||
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
|
||||
i2c_master_start(cmd);
|
||||
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
|
||||
|
||||
i2c_master_write_byte(cmd, OLED_CONTROL_BYTE_DATA_STREAM, true);
|
||||
i2c_master_write(cmd, (uint8_t *) color_buffer, buffer_len, true);
|
||||
i2c_master_stop(cmd);
|
||||
|
||||
/* Send queued commands */
|
||||
err = i2c_master_cmd_begin(DISP_I2C_PORT, cmd, 10 / portTICK_PERIOD_MS);
|
||||
i2c_cmd_link_delete(cmd);
|
||||
|
||||
return ESP_OK == err ? 0 : 1;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in a new issue