Marge branch 'master' into lvgl_7.11.0_idf_5.0

This commit is contained in:
Luc Appelman 2023-05-17 10:17:09 +02:00
commit a73c429954
62 changed files with 2427 additions and 1270 deletions

10
.gitignore vendored
View file

@ -50,3 +50,13 @@ modules.order
Module.symvers Module.symvers
Mkfile.old Mkfile.old
dkms.conf dkms.conf
# MacOS
.DS_Store
# ESP-IDF build dir
build
# Kconfig files
sdkconfig
sdkconfig.old

View file

@ -3,8 +3,7 @@ if(ESP_PLATFORM)
file(GLOB SOURCES *.c) file(GLOB SOURCES *.c)
set(LVGL_INCLUDE_DIRS . lvgl_tft) set(LVGL_INCLUDE_DIRS . lvgl_tft)
list(APPEND SOURCES "lvgl_tft/disp_driver.c") list(APPEND SOURCES "lvgl_tft/disp_driver.c")
list(APPEND SOURCES "lvgl_tft/esp_lcd_backlight.c")
#@todo add SimleInclude macro here
# Include only the source file of the selected # Include only the source file of the selected
# display controller. # display controller.
@ -41,6 +40,10 @@ elseif(CONFIG_LV_TFT_DISPLAY_CONTROLLER_RA8875)
list(APPEND SOURCES "lvgl_tft/ra8875.c") list(APPEND SOURCES "lvgl_tft/ra8875.c")
elseif(CONFIG_LV_TFT_DISPLAY_CONTROLLER_GC9A01) elseif(CONFIG_LV_TFT_DISPLAY_CONTROLLER_GC9A01)
list(APPEND SOURCES "lvgl_tft/GC9A01.c") list(APPEND SOURCES "lvgl_tft/GC9A01.c")
elseif(CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9163C)
list(APPEND SOURCES "lvgl_tft/ili9163c.c")
elseif(CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544)
list(APPEND SOURCES "lvgl_tft/pcd8544.c")
else() else()
message(WARNING "LVGL ESP32 drivers: Display controller not defined.") message(WARNING "LVGL ESP32 drivers: Display controller not defined.")
endif() endif()
@ -68,15 +71,19 @@ if(CONFIG_LV_TOUCH_CONTROLLER)
list(APPEND SOURCES "lvgl_touch/FT81x.c") list(APPEND SOURCES "lvgl_touch/FT81x.c")
elseif(CONFIG_LV_TOUCH_CONTROLLER_RA8875) elseif(CONFIG_LV_TOUCH_CONTROLLER_RA8875)
list(APPEND SOURCES "lvgl_touch/ra8875_touch.c") list(APPEND SOURCES "lvgl_touch/ra8875_touch.c")
elseif(CONFIG_LV_TOUCH_CONTROLLER_GT911)
list(APPEND SOURCES "lvgl_touch/gt911.c")
endif() endif()
if(CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI) if(CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI)
list(APPEND SOURCES "lvgl_touch/tp_spi.c") list(APPEND SOURCES "lvgl_touch/tp_spi.c")
elseif(CONFIG_LV_TOUCH_DRIVER_PROTOCOL_I2C)
list(APPEND SOURCES "lvgl_touch/tp_i2c.c")
endif() endif()
endif() endif()
if(CONFIG_LV_I2C)
list(APPEND SOURCES "lvgl_i2c/i2c_manager.c")
endif()
idf_component_register(SRCS ${SOURCES} idf_component_register(SRCS ${SOURCES}
INCLUDE_DIRS ${LVGL_INCLUDE_DIRS} INCLUDE_DIRS ${LVGL_INCLUDE_DIRS}
REQUIRES lvgl) REQUIRES lvgl)

16
Kconfig
View file

@ -1,2 +1,14 @@
rsource "lvgl_tft/Kconfig" menu "LVGL ESP Drivers"
rsource "lvgl_touch/Kconfig"
rsource "lvgl_tft/Kconfig"
rsource "lvgl_touch/Kconfig"
endmenu
menu "I2C Port Settings"
depends on LV_I2C && !HAVE_I2C_MANAGER
rsource "lvgl_i2c/Kconfig"
endmenu

View file

@ -6,6 +6,8 @@ For a ready to use ESP32 project take look at the [lv_port_esp32](https://github
- [Supported display controllers](#supported-display-controllers) - [Supported display controllers](#supported-display-controllers)
- [Supported indev controllers](#supported-indev-controllers) - [Supported indev controllers](#supported-indev-controllers)
- [Support for predefined development kits](#support-for-predefined-development-kits) - [Support for predefined development kits](#support-for-predefined-development-kits)
- [Thread-safe I2C with I2C Manager](#thread-safe-i2c-with-i2c-manager)
- [Backlight control](#backlight-control)
**NOTE:** You need to set the display horizontal and vertical size, color depth and **NOTE:** You need to set the display horizontal and vertical size, color depth and
swap of RGB565 color on the LVGL configuration menuconfig (it's not handled automatically). swap of RGB565 color on the LVGL configuration menuconfig (it's not handled automatically).
@ -17,6 +19,7 @@ swap of RGB565 color on the LVGL configuration menuconfig (it's not handled auto
| Display Controller | Type | Interface | Color depth (LV_COLOR_DEPTH) | Swap RGB565 color (LV_COLOR_16_SWAP) | | Display Controller | Type | Interface | Color depth (LV_COLOR_DEPTH) | Swap RGB565 color (LV_COLOR_16_SWAP) |
|---------------------------------------------|------------|------------------------|------------------------------|----------------------------------------| |---------------------------------------------|------------|------------------------|------------------------------|----------------------------------------|
| ILI9341 | TFT | SPI | 16: RGB565 | Yes | | ILI9341 | TFT | SPI | 16: RGB565 | Yes |
| ILI9163C | TFT | SPI | 16: RGB565 | Yes |
| ILI9486 | TFT | SPI | 16: RGB565 | Yes | | ILI9486 | TFT | SPI | 16: RGB565 | Yes |
| ILI9488 | TFT | SPI | 16: RGB565 | No | | ILI9488 | TFT | SPI | 16: RGB565 | No |
| HX8357B/HX8357D | TFT | SPI | 16: RGB565 | Yes | | HX8357B/HX8357D | TFT | SPI | 16: RGB565 | Yes |
@ -27,6 +30,7 @@ swap of RGB565 color on the LVGL configuration menuconfig (it's not handled auto
| RA8875 | TFT | SPI | 16: RGB565 | Yes | | RA8875 | TFT | SPI | 16: RGB565 | Yes |
| SH1107 | Monochrome | SPI | 1: 1byte per pixel | No | | SH1107 | Monochrome | SPI | 1: 1byte per pixel | No |
| SSD1306 | Monochrome | I2C | 1: 1byte per pixel | No | | SSD1306 | Monochrome | I2C | 1: 1byte per pixel | No |
| PCD8544 | Monochrome | SPI | 1: 1byte per pixel | No |
| IL3820 | e-Paper | SPI | 1: 1byte per pixel | No | | IL3820 | e-Paper | SPI | 1: 1byte per pixel | No |
| UC8151D/ GoodDisplay GDEW0154M10 DES | e-Paper | SPI | 1: 1byte per pixel | No | | UC8151D/ GoodDisplay GDEW0154M10 DES | e-Paper | SPI | 1: 1byte per pixel | No |
| FitiPower JD79653A/ GoodDisplay GDEW0154M09 | e-Paper | SPI | 1: 1byte per pixel | No | | FitiPower JD79653A/ GoodDisplay GDEW0154M09 | e-Paper | SPI | 1: 1byte per pixel | No |
@ -34,8 +38,8 @@ swap of RGB565 color on the LVGL configuration menuconfig (it's not handled auto
## Supported indev controllers ## Supported indev controllers
- XPT2046 - XPT2046
- FT3236 - FT3236, FT6X36
- other FT6X36 or the FT6206 controllers should work as well (not tested) - FT6206 controllers should work as well (not tested)
- STMPE610 - STMPE610
- FT81x (Single, Dual, and Quad SPI) - FT81x (Single, Dual, and Quad SPI)
@ -51,6 +55,7 @@ and sets the gpio numbers for the interface.
|---------------------------|-----------------------|-----------|-----------|-----------| |---------------------------|-----------------------|-----------|-----------|-----------|
| ESP Wrover Kit v4.1 | ILI9341 | SPI | 240 | 320 | | ESP Wrover Kit v4.1 | ILI9341 | SPI | 240 | 320 |
| M5Stack | ILI9341 | SPI | 240 | 320 | | M5Stack | ILI9341 | SPI | 240 | 320 |
| M5Stack Core2 | ILI9341 | SPI | 240 | 320 |
| M5Stick | SH1107 | SPI | - | - | | M5Stick | SH1107 | SPI | - | - |
| M5StickC | ST7735S | SPI | 80 | 160 | | M5StickC | ST7735S | SPI | 80 | 160 |
| Adafruit 3.5 Featherwing | HX8357 | SPI | 480 | 320 | | Adafruit 3.5 Featherwing | HX8357 | SPI | 480 | 320 |
@ -63,3 +68,27 @@ and sets the gpio numbers for the interface.
**NOTE:** See [Supported display controllers](#supported-display-controllers) for more information on display configuration. **NOTE:** See [Supported display controllers](#supported-display-controllers) for more information on display configuration.
**NOTE:** See [Supported indev controllers](#supported-indev-controllers) for more information about indev configuration. **NOTE:** See [Supported indev controllers](#supported-indev-controllers) for more information about indev configuration.
## Thread-safe I2C with I2C Manager
LVGL can use I2C to read from a touch sensor or write to a display, possibly
many times a second. Meanwhile, other tasks may also want to read from i2c
devices on the same bus. I2C using the ESP-IDF is not thread-safe.
I2C Manager (`i2c_manager`) is a component that will let code in multiple threads
talk to devices on the I2C ports without getting in each other's way. These drivers
use a built-in copy of I2C Manager to talk to the I2C port, but you can also use
the I2C Manager component itself and have others play nice with LVGL and vice-versa.
[Click here](i2c_manager/README.md) for details.
## Backlight control
Control of LCD's backlight is provided by separate module that is independent from the display driver.
Configuration of the backlight controller can be found in menuconfig `LVGL ESP Drivers -> LVGL TFT Display controller`.
There are three modes of operation:
1. Off - No backlight control
2. Switch - Allows ON/OFF control
3. PWM - Allows brightness control (by Pulse-Width-Modulated signal)

View file

@ -1,7 +1,7 @@
# LVGL ESP32 drivers # LVGL ESP32 drivers
# Define sources and include dirs # Define sources and include dirs
COMPONENT_SRCDIRS := . lvgl_tft lvgl_touch COMPONENT_SRCDIRS := . lvgl_tft lvgl_touch lvgl_i2c
COMPONENT_ADD_INCLUDEDIRS := . COMPONENT_ADD_INCLUDEDIRS := .
# LVGL is supposed to be used as a ESP-IDF component # LVGL is supposed to be used as a ESP-IDF component
@ -44,4 +44,6 @@ $(call compile_only_if,$(and $(CONFIG_LV_TOUCH_CONTROLLER),$(CONFIG_LV_TOUCH_CON
$(call compile_only_if,$(and $(CONFIG_LV_TOUCH_CONTROLLER),$(CONFIG_LV_TOUCH_CONTROLLER_RA8875)), lvgl_touch/ra8875_touch.o) $(call compile_only_if,$(and $(CONFIG_LV_TOUCH_CONTROLLER),$(CONFIG_LV_TOUCH_CONTROLLER_RA8875)), lvgl_touch/ra8875_touch.o)
$(call compile_only_if,$(and $(CONFIG_LV_TOUCH_CONTROLLER),$(CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI)), lvgl_touch/tp_spi.o) $(call compile_only_if,$(and $(CONFIG_LV_TOUCH_CONTROLLER),$(CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI)), lvgl_touch/tp_spi.o)
$(call compile_only_if,$(and $(CONFIG_LV_TOUCH_CONTROLLER),$(CONFIG_LV_TOUCH_DRIVER_PROTOCOL_I2C)), lvgl_touch/tp_i2c.o)
# I2C Manager
$(call compile_only_if,$(CONFIG_LV_I2C), lvgl_i2c/i2c_manager.o)

View file

@ -14,14 +14,13 @@
#include "lvgl_touch/tp_spi.h" #include "lvgl_touch/tp_spi.h"
#include "lvgl_spi_conf.h" #include "lvgl_spi_conf.h"
#include "lvgl_i2c_conf.h"
#include "driver/i2c.h" #include "lvgl_i2c/i2c_manager.h"
#ifdef LV_LVGL_H_INCLUDE_SIMPLE #ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "src/lv_core/lv_refr.h" #include "lvgl.h"
#else #else
#include "lvgl/src/lv_core/lv_refr.h" #include "lvgl/lvgl.h"
#endif #endif
/********************* /*********************
@ -53,7 +52,12 @@
/* Interface and driver initialization */ /* Interface and driver initialization */
void lvgl_driver_init(void) void lvgl_driver_init(void)
{ {
/* Since LVGL v8 LV_HOR_RES_MAX and LV_VER_RES_MAX are not defined, so
* print it only if they are defined. */
#if (LVGL_VERSION_MAJOR < 8)
ESP_LOGI(TAG, "Display hor size: %d, ver size: %d", LV_HOR_RES_MAX, LV_VER_RES_MAX); ESP_LOGI(TAG, "Display hor size: %d, ver size: %d", LV_HOR_RES_MAX, LV_VER_RES_MAX);
#endif
ESP_LOGI(TAG, "Display buffer size: %d", DISP_BUF_SIZE); ESP_LOGI(TAG, "Display buffer size: %d", DISP_BUF_SIZE);
#if defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X) #if defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X)
@ -91,19 +95,6 @@ void lvgl_driver_init(void)
return; return;
#endif #endif
#if defined (SHARED_I2C_BUS)
ESP_LOGI(TAG, "Initializing shared I2C master");
lvgl_i2c_driver_init(DISP_I2C_PORT,
DISP_I2C_SDA, DISP_I2C_SCL,
DISP_I2C_SPEED_HZ);
disp_driver_init();
touch_driver_init();
return;
#endif
/* Display controller initialization */ /* Display controller initialization */
#if defined CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI #if defined CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI
ESP_LOGI(TAG, "Initializing SPI master for display"); ESP_LOGI(TAG, "Initializing SPI master for display");
@ -116,13 +107,7 @@ void lvgl_driver_init(void)
disp_spi_add_device(TFT_SPI_HOST); disp_spi_add_device(TFT_SPI_HOST);
disp_driver_init(); disp_driver_init();
#elif defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_I2C) #elif defined (CONFIG_LV_I2C_DISPLAY)
ESP_LOGI(TAG, "Initializing I2C master for display");
/* Init the i2c master on the display driver code */
lvgl_i2c_driver_init(DISP_I2C_PORT,
DISP_I2C_SDA, DISP_I2C_SCL,
DISP_I2C_SPEED_HZ);
disp_driver_init(); disp_driver_init();
#else #else
#error "No protocol defined for display controller" #error "No protocol defined for display controller"
@ -141,13 +126,7 @@ void lvgl_driver_init(void)
tp_spi_add_device(TOUCH_SPI_HOST); tp_spi_add_device(TOUCH_SPI_HOST);
touch_driver_init(); touch_driver_init();
#elif defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_I2C) #elif defined (CONFIG_LV_I2C_TOUCH)
ESP_LOGI(TAG, "Initializing I2C master for touch");
lvgl_i2c_driver_init(TOUCH_I2C_PORT,
TOUCH_I2C_SDA, TOUCH_I2C_SCL,
TOUCH_I2C_SPEED_HZ);
touch_driver_init(); touch_driver_init();
#elif defined (CONFIG_LV_TOUCH_DRIVER_ADC) #elif defined (CONFIG_LV_TOUCH_DRIVER_ADC)
touch_driver_init(); touch_driver_init();
@ -160,63 +139,27 @@ void lvgl_driver_init(void)
#endif #endif
} }
/* Config the i2c master
/* Initialize spi bus master
* *
* This should init the i2c master to be used on display and touch controllers. * NOTE: dma_chan type and value changed to int instead of spi_dma_chan_t
* So we should be able to know if the display and touch controllers shares the * for backwards compatibility with ESP-IDF versions prior v4.3.
* same i2c master. *
* We could use the ESP_IDF_VERSION_VAL macro available in the "esp_idf_version.h"
* header available since ESP-IDF v4.
*/ */
bool lvgl_i2c_driver_init(int port, int sda_pin, int scl_pin, int speed_hz)
{
esp_err_t err;
ESP_LOGI(TAG, "Initializing I2C master port %d...", port);
ESP_LOGI(TAG, "SDA pin: %d, SCL pin: %d, Speed: %d (Hz)",
sda_pin, scl_pin, speed_hz);
i2c_config_t conf = {
.mode = I2C_MODE_MASTER,
.sda_io_num = sda_pin,
.sda_pullup_en = GPIO_PULLUP_ENABLE,
.scl_io_num = scl_pin,
.scl_pullup_en = GPIO_PULLUP_ENABLE,
.master.clk_speed = speed_hz,
};
ESP_LOGI(TAG, "Setting I2C master configuration...");
err = i2c_param_config(port, &conf);
assert(ESP_OK == err);
ESP_LOGI(TAG, "Installing I2C master driver...");
err = i2c_driver_install(port,
I2C_MODE_MASTER,
0, 0 /*I2C_MASTER_RX_BUF_DISABLE, I2C_MASTER_TX_BUF_DISABLE */,
0 /* intr_alloc_flags */);
assert(ESP_OK == err);
return ESP_OK != err;
}
/* Initialize spi bus master */
bool lvgl_spi_driver_init(int host, bool lvgl_spi_driver_init(int host,
int miso_pin, int mosi_pin, int sclk_pin, int miso_pin, int mosi_pin, int sclk_pin,
int max_transfer_sz, int max_transfer_sz,
int dma_channel, int dma_channel,
int quadwp_pin, int quadhd_pin) int quadwp_pin, int quadhd_pin)
{ {
#if defined (CONFIG_IDF_TARGET_ESP32) assert((0 <= host) && (SPI_HOST_MAX > host));
assert((SPI_HOST <= host) && (VSPI_HOST >= host));
const char *spi_names[] = { const char *spi_names[] = {
"SPI_HOST", "HSPI_HOST", "VSPI_HOST" "SPI1_HOST", "SPI2_HOST", "SPI3_HOST"
}; };
#elif defined (CONFIG_IDF_TARGET_ESP32S2)
assert((SPI_HOST <= host) && (HSPI_HOST >= host));
const char *spi_names[] = {
"SPI_HOST", "", ""
};
#endif
ESP_LOGI(TAG, "Configuring SPI host %s (%d)", spi_names[host], host); ESP_LOGI(TAG, "Configuring SPI host %s", spi_names[host]);
ESP_LOGI(TAG, "MISO pin: %d, MOSI pin: %d, SCLK pin: %d, IO2/WP pin: %d, IO3/HD pin: %d", ESP_LOGI(TAG, "MISO pin: %d, MOSI pin: %d, SCLK pin: %d, IO2/WP pin: %d, IO3/HD pin: %d",
miso_pin, mosi_pin, sclk_pin, quadwp_pin, quadhd_pin); miso_pin, mosi_pin, sclk_pin, quadwp_pin, quadhd_pin);
@ -232,9 +175,11 @@ bool lvgl_spi_driver_init(int host,
}; };
ESP_LOGI(TAG, "Initializing SPI bus..."); ESP_LOGI(TAG, "Initializing SPI bus...");
esp_err_t ret = spi_bus_initialize(host, &buscfg, dma_channel); #if defined (CONFIG_IDF_TARGET_ESP32C3)
dma_channel = SPI_DMA_CH_AUTO;
#endif
esp_err_t ret = spi_bus_initialize(host, &buscfg, (spi_dma_chan_t)dma_channel);
assert(ret == ESP_OK); assert(ret == ESP_OK);
return ESP_OK != ret; return ESP_OK != ret;
} }

View file

@ -16,6 +16,7 @@ extern "C" {
#include "lvgl_spi_conf.h" #include "lvgl_spi_conf.h"
#include "lvgl_tft/disp_driver.h" #include "lvgl_tft/disp_driver.h"
#include "lvgl_tft/esp_lcd_backlight.h"
#include "lvgl_touch/touch_driver.h" #include "lvgl_touch/touch_driver.h"
/********************* /*********************
@ -73,6 +74,10 @@ extern "C" {
#define DISP_BUF_SIZE ((LV_VER_RES_MAX * LV_VER_RES_MAX) / 8) // 5KB #define DISP_BUF_SIZE ((LV_VER_RES_MAX * LV_VER_RES_MAX) / 8) // 5KB
#elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D) #elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D)
#define DISP_BUF_SIZE ((LV_VER_RES_MAX * LV_VER_RES_MAX) / 8) // 2888 bytes #define DISP_BUF_SIZE ((LV_VER_RES_MAX * LV_VER_RES_MAX) / 8) // 2888 bytes
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9163C
#define DISP_BUF_SIZE (LV_HOR_RES_MAX * 40)
#elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544)
#define DISP_BUF_SIZE (LV_HOR_RES_MAX * (LV_VER_RES_MAX / 8))
#else #else
#error "No display controller selected" #error "No display controller selected"
#endif #endif
@ -86,14 +91,14 @@ extern "C" {
* GLOBAL PROTOTYPES * GLOBAL PROTOTYPES
**********************/ **********************/
void lvgl_i2c_locking(void* leader);
/* Initialize detected SPI and I2C bus and devices */ /* Initialize detected SPI and I2C bus and devices */
void lvgl_driver_init(void); void lvgl_driver_init(void);
/* Initialize SPI master */ /* Initialize SPI master */
bool lvgl_spi_driver_init(int host, int miso_pin, int mosi_pin, int sclk_pin, bool lvgl_spi_driver_init(int host, int miso_pin, int mosi_pin, int sclk_pin,
int max_transfer_sz, int dma_channel, int quadwp_pin, int quadhd_pin); int max_transfer_sz, int dma_channel, int quadwp_pin, int quadhd_pin);
/* Initialize I2C master */
bool lvgl_i2c_driver_init(int port, int sda_pin, int scl_pin, int speed);
/********************** /**********************
* MACROS * MACROS

98
lvgl_i2c/Kconfig Normal file
View file

@ -0,0 +1,98 @@
menu "I2C Port 0"
config I2C_MANAGER_0_ENABLED
bool "Enable I2C port 0"
if I2C_MANAGER_0_ENABLED
config I2C_MANAGER_0_SDA
int "SDA (GPIO pin)"
default 0
config I2C_MANAGER_0_SCL
int "SCL (GPIO pin)"
default 0
config I2C_MANAGER_0_FREQ_HZ
int "Frequency (Hz)"
default 400000
range 100000 5000000
help
The clock speed in Hz. Ranges from 100000 (100 kHz) to
5000000 (5 Mhz). I2C busses that involve external wires may
have to be slower, and the real maximum speed the bus will
support depends on the value of the pullup resistors and the
design of the overall circuit.
config I2C_MANAGER_0_TIMEOUT
int "R/W timeout (ms)"
default 20
range 10 1000
help
Timeout for I2C read and write operations. This does not
include the time waiting for a lock.
config I2C_MANAGER_0_LOCK_TIMEOUT
int "Stale lock override (ms)"
default 50
range 10 1000
help
Timeout at which point an operation waiting for its turn on
the port will assume that whatever set the lock has died and
overrides it. Set this somewhat larger than the previous
timeout.
config I2C_MANAGER_0_PULLUPS
bool "Use ESP32 built-in bus pull-up resistors"
help
The I2C bus needs resistors to make sure it's in a defined
state when nobody is talking. Many circuits have external
pullup resistors already and turning these on will increase
power consumption slightly and may limit the speed your bus
can attain. Try with these off first if you don't know.
endif
endmenu
menu "I2C Port 1"
config I2C_MANAGER_1_ENABLED
bool "Enable I2C port 1"
if I2C_MANAGER_1_ENABLED
config I2C_MANAGER_1_SDA
int "SDA (GPIO pin)"
config I2C_MANAGER_1_SCL
int "SCL (GPIO pin)"
config I2C_MANAGER_1_FREQ_HZ
int "Frequency (Hz)"
default 1000000
range 100000 5000000
help
The clock speed in Hz. Ranges from 100000 (100 kHz) to
5000000 (5 Mhz). I2C busses that involve external wires may
have to be slower, and the real maximum speed the bus will
support depends on the value of the pullup resistors and the
design of the overall circuit.
config I2C_MANAGER_1_TIMEOUT
int "R/W timeout (ms)"
default 20
range 10 1000
help
Timeout for I2C read and write operations. This does not
include the time waiting for a lock. Default should be fine.
config I2C_MANAGER_1_LOCK_TIMEOUT
int "Stale lock override (ms)"
default 50
help
Timeout at which point an operation waiting for its turn on
the port will assume that whatever set the lock has died and
overrides it. Set this somewhat larger than the previous
timeout. Default should be fine.
range 30 1000
config I2C_MANAGER_1_PULLUPS
bool "Use ESP32 built-in bus pull-up resistors"
help
The I2C bus needs resistors to make sure it's in a defined
state when nobody is talking. Many circuits have external
pullup resistors already and turning these on will increase
power consumption slightly and may limit the speed your bus
can attain. Try with these off first if you don't know.
endif
endmenu

90
lvgl_i2c/README.md Normal file
View file

@ -0,0 +1,90 @@
# I2C in `lvgl_esp32_drivers`
&nbsp;
## Information for users
### I2C Manager support
`lvgl_esp32_drivers` integrates [I2C Manager](https://github.com/ropg/i2c_manager), which is used in case you select a touch sensor or screen that uses the I2C bus.
I2C Manager is also available as a separate ESP-IDF component and can help if you are in a situation where you want to avoid "bus conflicts" on the I2C bus. **If in your application nothing outside of LVGL needs to talk to the I2C bus, you can stop reading here.**
Suppose you use LVGL with a touch sensor that uses I2C, and your device also has another I2C device that needs to be read frequently, such as a 3D-accelerometer. ESP-IDF is not inherently "thread-safe". So if you read that from another task than the one LVGL uses to read the touch data, you need some kind of mechanism to keep these communications from interfering.
If you have (or write) a driver for that 3D-accelerometer that can use I2C Manager (or the I2C HAL and i2cdev abstraction layers that I2C Manager is compatible with) then put I2C Manager in your components directory by cloning the repository from below and in your main program do:
```c
#include "i2c_manager.h"
#include "lvgl_helpers.h"
[...]
lvgl_i2c_locking(i2c_manager_locking());
lv_init();
lvgl_driver_init();
```
The `lvgl_i2c_locking` part will cause the LVGL I2C driver to play nice with anything else that uses the I2C port(s) through I2C Manager.
&nbsp;
## Information for LVGL driver developers
I2C support in the LVGL ESP drivers is provided exclusively by the files in this directory. Driver code that uses I2C communicates through the functions provided in `i2c_manager.h`.
&nbsp;
### Using I2C in an LVGL driver, a multi-step guide
<dl>
<dt>Step 1</dt>
<dd>
The Kconfig entries for your driver only need to specify that you will be using I2C. This is done by adding `select LV_I2C_DISPLAY` or `select LV_I2C_TOUCH`.
</dd>
<dt>Step 2</dt>
<dd>
To use the I2C port in your code you would do something like:
```c
#include "lvgl_i2c/i2c_manager.h"
uint8_t data[2];
lvgl_i2c_read(CONFIG_LV_I2C_TOUCH_PORT, 0x23, 0x42, &data, 2);
```
This causes a touch driver to read two bytes at register `0x42` from the IC at address `0x23`. Replace `CONFIG_LV_I2C_TOUCH_PORT` by `CONFIG_LV_I2C_DISPLAY_PORT` when this is a display instead of a touch driver. `lvgl_i2c_write` works much the same way, except it writes the bytes from the buffer instead of reading them. _(It's ignored above but these functions return `esp_err_t` so you can check if the I2C communication worked.)_
</dd>
<dt>Step 3</dt>
<dd>
There is no step 3, you are already done.
</dd>
</dl>
### Meanwhile, behind the scenes ...
If any of the drivers selected by the user uses I2C, the menuconfig system will show an extra menu to select I2C port(s) for screen and/or touch sensor. An additional menu allows for setting of GPIO pins and bus speed of any port selected for use with LVGL. It's perfectly fine for a display and a touch sensor to be on the same I2C port or different ones.
&nbsp;
## More information
If you need more documentation, please refer to the [I2C Manager GitHub repository](https://github.com/ropg/i2c_manager) for more detailed information on how I2C manager works. There are features not in the simple example above, such as reads and writes without specifying a register, 16-bit registers, 10-bit I2C addressing and more.

368
lvgl_i2c/i2c_manager.c Normal file
View file

@ -0,0 +1,368 @@
/*
SPDX-License-Identifier: MIT
MIT License
Copyright (c) 2021 Rop Gonggrijp. Based on esp_i2c_helper by Mika Tuupola.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
*/
#include <stdint.h>
#include <stddef.h>
#include <esp_log.h>
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/task.h"
#include <driver/i2c.h>
#include "sdkconfig.h"
#include "i2c_manager.h"
#if defined __has_include
#if __has_include ("esp_idf_version.h")
#include "esp_idf_version.h"
#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 3, 0)
#define HAS_CLK_FLAGS
#endif
#endif
#endif
static const char* TAG = I2C_TAG;
static SemaphoreHandle_t I2C_FN(_local_mutex)[2] = { NULL, NULL };
static SemaphoreHandle_t* I2C_FN(_mutex) = &I2C_FN(_local_mutex)[0];
static const uint8_t ACK_CHECK_EN = 1;
#if defined (I2C_NUM_0) && defined (CONFIG_I2C_MANAGER_0_ENABLED)
#define I2C_ZERO I2C_NUM_0
#if defined (CONFIG_I2C_MANAGER_0_PULLUPS)
#define I2C_MANAGER_0_PULLUPS true
#else
#define I2C_MANAGER_0_PULLUPS false
#endif
#define I2C_MANAGER_0_TIMEOUT ( CONFIG_I2C_MANAGER_0_TIMEOUT / portTICK_RATE_MS )
#define I2C_MANAGER_0_LOCK_TIMEOUT ( CONFIG_I2C_MANAGER_0_LOCK_TIMEOUT / portTICK_RATE_MS )
#endif
#if defined (I2C_NUM_1) && defined (CONFIG_I2C_MANAGER_1_ENABLED)
#define I2C_ONE I2C_NUM_1
#if defined (CONFIG_I2C_MANAGER_1_PULLUPS)
#define I2C_MANAGER_1_PULLUPS true
#else
#define I2C_MANAGER_1_PULLUPS false
#endif
#define I2C_MANAGER_1_TIMEOUT ( CONFIG_I2C_MANAGER_1_TIMEOUT / portTICK_RATE_MS )
#define I2C_MANAGER_1_LOCK_TIMEOUT ( CONFIG_I2C_MANAGER_1_LOCK_TIMEOUT / portTICK_RATE_MS )
#endif
#define ERROR_PORT(port, fail) { \
ESP_LOGE(TAG, "Invalid port or not configured for I2C Manager: %d", (int)port); \
return fail; \
}
#if defined(I2C_ZERO) && defined (I2C_ONE)
#define I2C_PORT_CHECK(port, fail) \
if (port != I2C_NUM_0 && port != I2C_NUM_1) ERROR_PORT(port, fail);
#else
#if defined(I2C_ZERO)
#define I2C_PORT_CHECK(port, fail) \
if (port != I2C_NUM_0) ERROR_PORT(port, fail);
#elif defined(I2C_ONE)
#define I2C_PORT_CHECK(port, fail) \
if (port != I2C_NUM_1) ERROR_PORT(port, fail);
#else
#define I2C_PORT_CHECK(port, fail) \
ERROR_PORT(port, fail);
#endif
#endif
static void i2c_send_address(i2c_cmd_handle_t cmd, uint16_t addr, i2c_rw_t rw) {
if (addr & I2C_ADDR_10) {
i2c_master_write_byte(cmd, 0xF0 | ((addr & 0x3FF) >> 7) | rw, ACK_CHECK_EN);
i2c_master_write_byte(cmd, addr & 0xFF, ACK_CHECK_EN);
} else {
i2c_master_write_byte(cmd, (addr << 1) | rw, ACK_CHECK_EN);
}
}
static void i2c_send_register(i2c_cmd_handle_t cmd, uint32_t reg) {
if (reg & I2C_REG_16) {
i2c_master_write_byte(cmd, (reg & 0xFF00) >> 8, ACK_CHECK_EN);
}
i2c_master_write_byte(cmd, reg & 0xFF, ACK_CHECK_EN);
}
esp_err_t I2C_FN(_init)(i2c_port_t port) {
I2C_PORT_CHECK(port, ESP_FAIL);
esp_err_t ret = ESP_OK;
if (I2C_FN(_mutex)[port] == 0) {
ESP_LOGI(TAG, "Starting I2C master at port %d.", (int)port);
I2C_FN(_mutex)[port] = xSemaphoreCreateMutex();
i2c_config_t conf = {0};
#ifdef HAS_CLK_FLAGS
conf.clk_flags = 0;
#endif
#if defined (I2C_ZERO)
if (port == I2C_NUM_0) {
conf.sda_io_num = CONFIG_I2C_MANAGER_0_SDA;
conf.scl_io_num = CONFIG_I2C_MANAGER_0_SCL;
conf.sda_pullup_en = I2C_MANAGER_0_PULLUPS ? GPIO_PULLUP_ENABLE : GPIO_PULLUP_DISABLE;
conf.scl_pullup_en = conf.sda_pullup_en;
conf.master.clk_speed = CONFIG_I2C_MANAGER_0_FREQ_HZ;
}
#endif
#if defined (I2C_ONE)
if (port == I2C_NUM_1) {
conf.sda_io_num = CONFIG_I2C_MANAGER_1_SDA;
conf.scl_io_num = CONFIG_I2C_MANAGER_1_SCL;
conf.sda_pullup_en = I2C_MANAGER_1_PULLUPS ? GPIO_PULLUP_ENABLE : GPIO_PULLUP_DISABLE;
conf.scl_pullup_en = conf.sda_pullup_en;
conf.master.clk_speed = CONFIG_I2C_MANAGER_1_FREQ_HZ;
}
#endif
conf.mode = I2C_MODE_MASTER;
ret = i2c_param_config(port, &conf);
ret |= i2c_driver_install(port, conf.mode, 0, 0, 0);
if (ret != ESP_OK) {
ESP_LOGE(TAG, "Failed to initialise I2C port %d.", (int)port);
ESP_LOGW(TAG, "If it was already open, we'll use it with whatever settings were used "
"to open it. See I2C Manager README for details.");
} else {
ESP_LOGI(TAG, "Initialised port %d (SDA: %d, SCL: %d, speed: %d Hz.)",
port, conf.sda_io_num, conf.scl_io_num, conf.master.clk_speed);
}
}
return ret;
}
esp_err_t I2C_FN(_read)(i2c_port_t port, uint16_t addr, uint32_t reg, uint8_t *buffer, uint16_t size) {
I2C_PORT_CHECK(port, ESP_FAIL);
esp_err_t result;
// May seem weird, but init starts with a check if it's needed, no need for that check twice.
I2C_FN(_init)(port);
ESP_LOGV(TAG, "Reading port %d, addr 0x%03x, reg 0x%04x", port, addr, reg);
TickType_t timeout = 0;
#if defined (I2C_ZERO)
if (port == I2C_NUM_0) {
timeout = I2C_MANAGER_0_TIMEOUT;
}
#endif
#if defined (I2C_ONE)
if (port == I2C_NUM_1) {
timeout = I2C_MANAGER_1_TIMEOUT;
}
#endif
if (I2C_FN(_lock)((int)port) == ESP_OK) {
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
if (!(reg & I2C_NO_REG)) {
/* When reading specific register set the addr pointer first. */
i2c_master_start(cmd);
i2c_send_address(cmd, addr, I2C_MASTER_WRITE);
i2c_send_register(cmd, reg);
}
/* Read size bytes from the current pointer. */
i2c_master_start(cmd);
i2c_send_address(cmd, addr, I2C_MASTER_READ);
i2c_master_read(cmd, buffer, size, I2C_MASTER_LAST_NACK);
i2c_master_stop(cmd);
result = i2c_master_cmd_begin(port, cmd, timeout);
i2c_cmd_link_delete(cmd);
I2C_FN(_unlock)((int)port);
} else {
ESP_LOGE(TAG, "Lock could not be obtained for port %d.", (int)port);
return ESP_ERR_TIMEOUT;
}
if (result != ESP_OK) {
ESP_LOGW(TAG, "Error: %d", result);
}
ESP_LOG_BUFFER_HEX_LEVEL(TAG, buffer, size, ESP_LOG_VERBOSE);
return result;
}
esp_err_t I2C_FN(_write)(i2c_port_t port, uint16_t addr, uint32_t reg, const uint8_t *buffer, uint16_t size) {
I2C_PORT_CHECK(port, ESP_FAIL);
esp_err_t result;
// May seem weird, but init starts with a check if it's needed, no need for that check twice.
I2C_FN(_init)(port);
ESP_LOGV(TAG, "Writing port %d, addr 0x%03x, reg 0x%04x", port, addr, reg);
TickType_t timeout = 0;
#if defined (I2C_ZERO)
if (port == I2C_NUM_0) {
timeout = (CONFIG_I2C_MANAGER_0_TIMEOUT) / portTICK_RATE_MS;
}
#endif
#if defined (I2C_ONE)
if (port == I2C_NUM_1) {
timeout = (CONFIG_I2C_MANAGER_1_TIMEOUT) / portTICK_RATE_MS;
}
#endif
if (I2C_FN(_lock)((int)port) == ESP_OK) {
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
i2c_master_start(cmd);
i2c_send_address(cmd, addr, I2C_MASTER_WRITE);
if (!(reg & I2C_NO_REG)) {
i2c_send_register(cmd, reg);
}
i2c_master_write(cmd, (uint8_t *)buffer, size, ACK_CHECK_EN);
i2c_master_stop(cmd);
result = i2c_master_cmd_begin( port, cmd, timeout);
i2c_cmd_link_delete(cmd);
I2C_FN(_unlock)((int)port);
} else {
ESP_LOGE(TAG, "Lock could not be obtained for port %d.", (int)port);
return ESP_ERR_TIMEOUT;
}
if (result != ESP_OK) {
ESP_LOGW(TAG, "Error: %d", result);
}
ESP_LOG_BUFFER_HEX_LEVEL(TAG, buffer, size, ESP_LOG_VERBOSE);
return result;
}
esp_err_t I2C_FN(_close)(i2c_port_t port) {
I2C_PORT_CHECK(port, ESP_FAIL);
vSemaphoreDelete(I2C_FN(_mutex)[port]);
I2C_FN(_mutex)[port] = NULL;
ESP_LOGI(TAG, "Closing I2C master at port %d", port);
return i2c_driver_delete(port);
}
esp_err_t I2C_FN(_lock)(i2c_port_t port) {
I2C_PORT_CHECK(port, ESP_FAIL);
ESP_LOGV(TAG, "Mutex lock set for %d.", (int)port);
TickType_t timeout;
#if defined (I2C_ZERO)
if (port == I2C_NUM_0) {
timeout = (CONFIG_I2C_MANAGER_0_LOCK_TIMEOUT) / portTICK_RATE_MS;
}
#endif
#if defined (I2C_ONE)
if (port == I2C_NUM_1) {
timeout = (CONFIG_I2C_MANAGER_1_LOCK_TIMEOUT) / portTICK_RATE_MS;
}
#endif
if (xSemaphoreTake(I2C_FN(_mutex)[port], timeout) == pdTRUE) {
return ESP_OK;
} else {
ESP_LOGE(TAG, "Removing stale mutex lock from port %d.", (int)port);
I2C_FN(_force_unlock)(port);
return (xSemaphoreTake(I2C_FN(_mutex)[port], timeout) == pdTRUE ? ESP_OK : ESP_FAIL);
}
}
esp_err_t I2C_FN(_unlock)(i2c_port_t port) {
I2C_PORT_CHECK(port, ESP_FAIL);
ESP_LOGV(TAG, "Mutex lock removed for %d.", (int)port);
return (xSemaphoreGive(I2C_FN(_mutex)[port]) == pdTRUE) ? ESP_OK : ESP_FAIL;
}
esp_err_t I2C_FN(_force_unlock)(i2c_port_t port) {
I2C_PORT_CHECK(port, ESP_FAIL);
if (I2C_FN(_mutex)[port]) {
vSemaphoreDelete(I2C_FN(_mutex)[port]);
}
I2C_FN(_mutex)[port] = xSemaphoreCreateMutex();
return ESP_OK;
}
#ifdef I2C_OEM
void I2C_FN(_locking)(void* leader) {
if (leader) {
ESP_LOGI(TAG, "Now following I2C Manager for locking");
I2C_FN(_mutex) = (SemaphoreHandle_t*)leader;
}
}
#else
void* i2c_manager_locking() {
return (void*)i2c_manager_mutex;
}
int32_t i2c_hal_read(void *handle, uint8_t address, uint8_t reg, uint8_t *buffer, uint16_t size) {
return i2c_manager_read(*(i2c_port_t*)handle, address, reg, buffer, size);
}
int32_t i2c_hal_write(void *handle, uint8_t address, uint8_t reg, const uint8_t *buffer, uint16_t size) {
return i2c_manager_write(*(i2c_port_t*)handle, address, reg, buffer, size);
}
static i2c_port_t port_zero = (i2c_port_t)0;
static i2c_port_t port_one = (i2c_port_t)1;
static i2c_hal_t _i2c_hal[2] = {
{&i2c_hal_read, &i2c_hal_write, &port_zero},
{&i2c_hal_read, &i2c_hal_write, &port_one}
};
void* i2c_hal(i2c_port_t port) {
I2C_PORT_CHECK(port, NULL);
return (void*)&_i2c_hal[port];
}
#endif

76
lvgl_i2c/i2c_manager.h Normal file
View file

@ -0,0 +1,76 @@
#ifndef _I2C_MANAGER_H
#define _I2C_MANAGER_H
#ifdef __cplusplus
extern "C" {
#endif
/*
If you copy the i2c_manager files to your own component instead of
depending on i2c_manager, you MUST uncomment the define below
and put in some short string that identifies your component (such
as 'xyz'). This will cause i2c_manager to create functions named
xyz_i2c_* instead of i2c_manager_*. See README.md for details.
*/
#define I2C_OEM lvgl
// Only here to get the I2C_NUM_0 and I2C_NUM_1 defines.
#include <driver/i2c.h>
#define CONCATX(A, B) A ## B
#define CONCAT(A, B) CONCATX(A, B)
#define STR_LITERAL(s) # s
#define STR_EXPAND(s) STR_LITERAL(s)
#define STR_QUOTE(s) STR_EXPAND(STR_EXPAND(s))
#ifdef I2C_OEM
#define I2C_NAME_PREFIX CONCAT(I2C_OEM, _i2c)
#else
#define I2C_NAME_PREFIX i2c_manager
#endif
#define I2C_TAG STR_EXPAND(I2C_NAME_PREFIX)
#define I2C_FN(s) CONCAT(I2C_NAME_PREFIX, s)
#define I2C_ADDR_10 ( 1 << 15 )
#define I2C_REG_16 ( 1 << 31 )
#define I2C_NO_REG ( 1 << 30 )
esp_err_t I2C_FN(_init)(i2c_port_t port);
esp_err_t I2C_FN(_read)(i2c_port_t port, uint16_t addr, uint32_t reg, uint8_t *buffer, uint16_t size);
esp_err_t I2C_FN(_write)(i2c_port_t port, uint16_t addr, uint32_t reg, const uint8_t *buffer, uint16_t size);
esp_err_t I2C_FN(_close)(i2c_port_t port);
esp_err_t I2C_FN(_lock)(i2c_port_t port);
esp_err_t I2C_FN(_unlock)(i2c_port_t port);
esp_err_t I2C_FN(_force_unlock)(i2c_port_t port);
#ifdef I2C_OEM
void I2C_FN(_locking)(void* leader);
#else
void* i2c_manager_locking();
typedef struct {
int32_t (* read)(void *handle, uint8_t address, uint8_t reg, uint8_t *buffer, uint16_t size);
int32_t (* write)(void *handle, uint8_t address, uint8_t reg, const uint8_t *buffer, uint16_t size);
void *handle;
} i2c_hal_t;
void* i2c_hal(i2c_port_t port);
#endif
#ifdef __cplusplus
}
#endif
#endif

View file

@ -1,116 +0,0 @@
/**
* @file lvgl_i2c_config.h
*/
#ifndef LVGL_I2C_CONF_H
#define LVGL_I2C_CONF_H
#ifdef __cplusplus
extern "C" {
#endif
/*********************
* INCLUDES
*********************/
#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif
/*********************
* DEFINES
*********************/
/* TODO: Define the I2C bus clock based on the selected display or touch
* controllers. */
/* Do both display and touch controllers uses I2C? */
#if defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_I2C) && \
defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_I2C)
#if defined (CONFIG_LV_DISPLAY_I2C_PORT_0) && \
defined (CONFIG_LV_TOUCH_I2C_PORT_0)
#define SHARED_I2C_PORT
#define DISP_I2C_PORT I2C_NUM_0
#endif
#if defined (CONFIG_LV_DISPLAY_I2C_PORT_1) && \
defined (CONFIG_LV_TOUCH_I2C_PORT_1)
#define SHARED_I2C_PORT
#define DISP_I2C_PORT I2C_NUM_1
#endif
#if !defined (SHARED_I2C_PORT)
#endif
#endif
#if defined (SHARED_I2C_PORT)
/* If the port is shared the display and touch controllers must use the same
* SCL and SDA pins, otherwise let the user know with an error. */
#if (CONFIG_LV_DISP_PIN_SDA != CONFIG_LV_TOUCH_I2C_SDA) || \
(CONFIG_LV_DISP_PIN_SCL != CONFIG_LV_TOUCH_I2C_SCL)
#error "To share I2C port you need to choose the same SDA and SCL pins on both display and touch configurations"
#endif
#define DISP_I2C_SDA CONFIG_LV_DISP_PIN_SDA
#define DISP_I2C_SCL CONFIG_LV_DISP_PIN_SCL
#define DISP_I2C_ORIENTATION TFT_ORIENTATION_LANDSCAPE
/* Setting the I2C speed to the slowest one */
#if DISP_I2C_SPEED_HZ < TOUCH_I2C_SPEED_HZ
#define DISP_I2C_SPEED_HZ 400000 /* DISP_I2C_SPEED_HZ */
#else
#define DISP_I2C_SPEED_HZ 400000 /* DISP_I2C_SPEED_HZ */
#endif
#else
/* lets check if the touch controller uses I2C... */
#if defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_I2C)
#if defined (CONFIG_LV_TOUCH_I2C_PORT_0)
#define TOUCH_I2C_PORT I2C_NUM_0
#else
#define TOUCH_I2C_PORT I2C_NUM_1
#endif
#define TOUCH_I2C_SDA CONFIG_LV_TOUCH_I2C_SDA
#define TOUCH_I2C_SCL CONFIG_LV_TOUCH_I2C_SCL
#define TOUCH_I2C_SPEED_HZ 400000
#endif
/* lets check if the display controller uses I2C... */
#if defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_I2C)
#if defined (CONFIG_LV_DISPLAY_I2C_PORT_0)
#define DISP_I2C_PORT I2C_NUM_0
#else
#define DISP_I2C_PORT I2C_NUM_1
#endif
#define DISP_I2C_SDA CONFIG_LV_DISP_PIN_SDA
#define DISP_I2C_SCL CONFIG_LV_DISP_PIN_SCL
#define DISP_I2C_ORIENTATION TFT_ORIENTATION_LANDSCAPE
#define DISP_I2C_SPEED_HZ 400000
#endif
#endif
/**********************
* TYPEDEFS
**********************/
/**********************
* GLOBAL PROTOTYPES
**********************/
/**********************
* MACROS
**********************/
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif /*LVGL_I2C_CONF_H*/

View file

@ -64,12 +64,10 @@ extern "C" {
#define ENABLE_TOUCH_INPUT CONFIG_LV_ENABLE_TOUCH #define ENABLE_TOUCH_INPUT CONFIG_LV_ENABLE_TOUCH
#if defined (CONFIG_LV_TFT_DISPLAY_SPI_HSPI) #if defined (CONFIG_LV_TFT_DISPLAY_SPI2_HOST)
#define TFT_SPI_HOST HSPI_HOST #define TFT_SPI_HOST SPI2_HOST
#elif defined (CONFIG_LV_TFT_DISPLAY_SPI_VSPI) #elif defined (CONFIG_LV_TFT_DISPLAY_SPI3_HOST)
#define TFT_SPI_HOST VSPI_HOST #define TFT_SPI_HOST SPI3_HOST
#elif defined (CONFIG_LV_TFT_DISPLAY_SPI_FSPI)
#define TFT_SPI_HOST FSPI_HOST
#endif #endif
#if defined (CONFIG_LV_TFT_DISPLAY_SPI_HALF_DUPLEX) #if defined (CONFIG_LV_TFT_DISPLAY_SPI_HALF_DUPLEX)
@ -86,12 +84,10 @@ extern "C" {
#define DISP_SPI_TRANS_MODE_SIO #define DISP_SPI_TRANS_MODE_SIO
#endif #endif
#if defined (CONFIG_LV_TOUCH_CONTROLLER_SPI_HSPI) #if defined (CONFIG_LV_TOUCH_CONTROLLER_SPI2_HOST)
#define TOUCH_SPI_HOST HSPI_HOST #define TOUCH_SPI_HOST SPI2_HOST
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_SPI_VSPI) #elif defined (CONFIG_LV_TOUCH_CONTROLLER_SPI3_HOST)
#define TOUCH_SPI_HOST VSPI_HOST #define TOUCH_SPI_HOST SPI3_HOST
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_SPI_FSPI)
#define TOUCH_SPI_HOST FSPI_HOST
#endif #endif
/* Handle the FT81X Special case */ /* Handle the FT81X Special case */
@ -107,7 +103,7 @@ extern "C" {
// Detect the use of a shared SPI Bus and verify the user specified the same SPI bus for both touch and tft // Detect the use of a shared SPI Bus and verify the user specified the same SPI bus for both touch and tft
#if defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI) && TP_SPI_MOSI == DISP_SPI_MOSI && TP_SPI_CLK == DISP_SPI_CLK #if defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI) && TP_SPI_MOSI == DISP_SPI_MOSI && TP_SPI_CLK == DISP_SPI_CLK
#if TFT_SPI_HOST != TOUCH_SPI_HOST #if TFT_SPI_HOST != TOUCH_SPI_HOST
#error You must specify the same SPI host (HSPI, VSPI or FSPI) for both display and touch driver #error You must specify the same SPI host (SPIx_HOST) for both display and touch driver
#endif #endif
#define SHARED_SPI_BUS #define SHARED_SPI_BUS
@ -130,7 +126,8 @@ extern "C" {
defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_SH1107) || \ defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_SH1107) || \
defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X) || \ defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X) || \
defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_IL3820) || \ defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_IL3820) || \
defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_JD79653A) defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_JD79653A) || \
defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9163C)
#define SPI_BUS_MAX_TRANSFER_SZ (DISP_BUF_SIZE * 2) #define SPI_BUS_MAX_TRANSFER_SZ (DISP_BUF_SIZE * 2)
@ -157,8 +154,12 @@ extern "C" {
#define SPI_TFT_CLOCK_SPEED_HZ (40*1000*1000) #define SPI_TFT_CLOCK_SPEED_HZ (40*1000*1000)
#elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9341) #elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9341)
#define SPI_TFT_CLOCK_SPEED_HZ (40*1000*1000) #define SPI_TFT_CLOCK_SPEED_HZ (40*1000*1000)
#elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X) #elif defined(CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9163C)
#define SPI_TFT_CLOCK_SPEED_HZ (40 * 1000 * 1000)
#elif defined(CONFIG_LV_TFT_DISPLAY_CONTROLLER_FT81X)
#define SPI_TFT_CLOCK_SPEED_HZ (32*1000*1000) #define SPI_TFT_CLOCK_SPEED_HZ (32*1000*1000)
#elif defined (CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544)
#define SPI_TFT_CLOCK_SPEED_HZ (4*1000*1000)
#else #else
#define SPI_TFT_CLOCK_SPEED_HZ (40*1000*1000) #define SPI_TFT_CLOCK_SPEED_HZ (40*1000*1000)
#endif #endif

View file

@ -144,7 +144,7 @@ void DELAY_MS(uint16_t ms)
vTaskDelay(ms / portTICK_PERIOD_MS); vTaskDelay(ms / portTICK_PERIOD_MS);
} }
#if EVE_USE_PDN
void EVE_pdn_set(void) void EVE_pdn_set(void)
{ {
gpio_set_level(EVE_PDN, 0); /* Power-Down low */ gpio_set_level(EVE_PDN, 0); /* Power-Down low */
@ -155,7 +155,7 @@ void EVE_pdn_clear(void)
{ {
gpio_set_level(EVE_PDN, 1); /* Power-Down high */ gpio_set_level(EVE_PDN, 1); /* Power-Down high */
} }
#endif
void spi_acquire() void spi_acquire()
{ {
@ -841,11 +841,13 @@ uint8_t EVE_init(void)
uint8_t chipid = 0; uint8_t chipid = 0;
uint16_t timeout = 0; uint16_t timeout = 0;
#if EVE_USE_PDN
EVE_pdn_set(); EVE_pdn_set();
DELAY_MS(6); /* minimum time for power-down is 5ms */ DELAY_MS(6); /* minimum time for power-down is 5ms */
EVE_pdn_clear(); EVE_pdn_clear();
DELAY_MS(21); /* minimum time to allow from rising PD_N to first access is 20ms */ DELAY_MS(21); /* minimum time to allow from rising PD_N to first access is 20ms */
#endif
/* EVE_cmdWrite(EVE_CORERST,0); */ /* reset, only required for warm-start if PowerDown line is not used */ /* EVE_cmdWrite(EVE_CORERST,0); */ /* reset, only required for warm-start if PowerDown line is not used */

View file

@ -39,8 +39,12 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR TH
#define BLOCK_TRANSFER_SIZE 3840 // block transfer size when write data to CMD buffer #define BLOCK_TRANSFER_SIZE 3840 // block transfer size when write data to CMD buffer
void DELAY_MS(uint16_t ms); void DELAY_MS(uint16_t ms);
#if EVE_USE_PDN
void EVE_pdn_set(void); void EVE_pdn_set(void);
void EVE_pdn_clear(void); void EVE_pdn_clear(void);
#endif
void spi_acquire(); void spi_acquire();
void spi_release(); void spi_release();

View file

@ -49,6 +49,7 @@ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR TH
#define EVE_MOSI DISP_SPI_MOSI // green #define EVE_MOSI DISP_SPI_MOSI // green
#define EVE_CS DISP_SPI_CS // blue #define EVE_CS DISP_SPI_CS // blue
#define EVE_PDN CONFIG_LV_DISP_PIN_RST // grey #define EVE_PDN CONFIG_LV_DISP_PIN_RST // grey
#define EVE_USE_PDN CONFIG_LV_DISP_USE_RST
#define SPI_TRANSER_SIZE (DISP_BUF_SIZE * (LV_COLOR_DEPTH / 8)) #define SPI_TRANSER_SIZE (DISP_BUF_SIZE * (LV_COLOR_DEPTH / 8))

View file

@ -262,9 +262,15 @@ void TFT_bitmap_display(void)
void FT81x_init(void) void FT81x_init(void)
{ {
#if EVE_USE_PDN
gpio_reset_pin(EVE_PDN); gpio_reset_pin(EVE_PDN);
#endif
gpio_set_level(EVE_CS, 1); gpio_set_level(EVE_CS, 1);
#if EVE_USE_PDN
gpio_set_direction(EVE_PDN, GPIO_MODE_OUTPUT); gpio_set_direction(EVE_PDN, GPIO_MODE_OUTPUT);
#endif
spi_acquire(); spi_acquire();

View file

@ -111,31 +111,25 @@ void GC9A01_init(void)
}; };
#if GC9A01_BCKL == 15
gpio_config_t io_conf;
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = GPIO_SEL_15;
io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
gpio_config(&io_conf);
#endif
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(GC9A01_DC); gpio_reset_pin(GC9A01_DC);
gpio_set_direction(GC9A01_DC, GPIO_MODE_OUTPUT); gpio_set_direction(GC9A01_DC, GPIO_MODE_OUTPUT);
#if GC9A01_USE_RST
gpio_reset_pin(GC9A01_RST); gpio_reset_pin(GC9A01_RST);
gpio_set_direction(GC9A01_RST, GPIO_MODE_OUTPUT); gpio_set_direction(GC9A01_RST, GPIO_MODE_OUTPUT);
#if GC9A01_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(GC9A01_BCKL);
gpio_set_direction(GC9A01_BCKL, GPIO_MODE_OUTPUT);
#endif
//Reset the display //Reset the display
gpio_set_level(GC9A01_RST, 0); gpio_set_level(GC9A01_RST, 0);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(GC9A01_RST, 1); gpio_set_level(GC9A01_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
#if GC9A01_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(GC9A01_BCKL);
gpio_set_direction(GC9A01_BCKL, GPIO_MODE_OUTPUT);
#endif
ESP_LOGI(TAG, "Initialization."); ESP_LOGI(TAG, "Initialization.");
@ -150,8 +144,6 @@ void GC9A01_init(void)
cmd++; cmd++;
} }
GC9A01_enable_backlight(true);
GC9A01_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION); GC9A01_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
#if GC9A01_INVERT_COLORS == 1 #if GC9A01_INVERT_COLORS == 1
@ -191,22 +183,6 @@ void GC9A01_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
GC9A01_send_color((void*)color_map, size * 2); GC9A01_send_color((void*)color_map, size * 2);
} }
void GC9A01_enable_backlight(bool backlight)
{
#if GC9A01_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (GC9A01_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(GC9A01_BCKL, tmp);
#endif
}
void GC9A01_sleep_in() void GC9A01_sleep_in()
{ {
uint8_t data[] = {0x08}; uint8_t data[] = {0x08};

View file

@ -27,16 +27,7 @@ extern "C" {
*********************/ *********************/
#define GC9A01_DC CONFIG_LV_DISP_PIN_DC #define GC9A01_DC CONFIG_LV_DISP_PIN_DC
#define GC9A01_RST CONFIG_LV_DISP_PIN_RST #define GC9A01_RST CONFIG_LV_DISP_PIN_RST
#define GC9A01_BCKL CONFIG_LV_DISP_PIN_BCKL #define GC9A01_USE_RST CONFIG_LV_DISP_USE_RST
#define GC9A01_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define GC9A01_BCKL_ACTIVE_LVL 1
#else
#define GC9A01_BCKL_ACTIVE_LVL 0
#endif
#define GC9A01_INVERT_COLORS CONFIG_LV_INVERT_COLORS #define GC9A01_INVERT_COLORS CONFIG_LV_INVERT_COLORS
/********************** /**********************
@ -49,7 +40,6 @@ extern "C" {
void GC9A01_init(void); void GC9A01_init(void);
void GC9A01_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void GC9A01_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void GC9A01_enable_backlight(bool backlight);
void GC9A01_sleep_in(void); void GC9A01_sleep_in(void);
void GC9A01_sleep_out(void); void GC9A01_sleep_out(void);

View file

@ -21,6 +21,10 @@ menu "LVGL TFT Display controller"
bool "M5Stack" bool "M5Stack"
select LV_TFT_DISPLAY_CONTROLLER_ILI9341 select LV_TFT_DISPLAY_CONTROLLER_ILI9341
select LV_TFT_DISPLAY_PROTOCOL_SPI select LV_TFT_DISPLAY_PROTOCOL_SPI
config LV_PREDEFINED_DISPLAY_M5CORE2
bool "M5Core2"
select LV_TFT_DISPLAY_CONTROLLER_ILI9341
select LV_TFT_DISPLAY_PROTOCOL_SPI
config LV_PREDEFINED_DISPLAY_M5STICK config LV_PREDEFINED_DISPLAY_M5STICK
bool "M5Stick" bool "M5Stick"
select LV_TFT_DISPLAY_CONTROLLER_SH1107 select LV_TFT_DISPLAY_CONTROLLER_SH1107
@ -46,7 +50,7 @@ menu "LVGL TFT Display controller"
config LV_PREDEFINED_DISPLAY_WEMOS_LOLIN config LV_PREDEFINED_DISPLAY_WEMOS_LOLIN
bool "Wemos Lolin OLED" bool "Wemos Lolin OLED"
select LV_TFT_DISPLAY_CONTROLLER_SSD1306 select LV_TFT_DISPLAY_CONTROLLER_SSD1306
select LV_TFT_DISPLAY_PROTOCOL_I2C select LV_I2C_DISPLAY
select LV_TFT_DISPLAY_MONOCHROME select LV_TFT_DISPLAY_MONOCHROME
select LV_THEME_MONO select LV_THEME_MONO
config LV_PREDEFINED_DISPLAY_ATAG config LV_PREDEFINED_DISPLAY_ATAG
@ -165,6 +169,15 @@ menu "LVGL TFT Display controller"
help help
ST7796S display controller. ST7796S display controller.
config LV_TFT_DISPLAY_CONTROLLER_ILI9163C
bool
help
ILI9163C display controller.
config LV_TFT_DISPLAY_CONTROLLER_PCD8544
bool
help
PCD8544 display controller (Nokia 3110/5110)
# Display controller communication protocol # Display controller communication protocol
# #
# This symbols define the communication protocol used by the # This symbols define the communication protocol used by the
@ -178,7 +191,7 @@ menu "LVGL TFT Display controller"
help help
Display controller protocol SPI Display controller protocol SPI
config LV_TFT_DISPLAY_PROTOCOL_I2C config LV_I2C_DISPLAY
bool bool
help help
Display controller protocol I2C Display controller protocol I2C
@ -186,24 +199,24 @@ menu "LVGL TFT Display controller"
# Used in display init function to send display orientation commands # Used in display init function to send display orientation commands
choice DISPLAY_ORIENTATION choice DISPLAY_ORIENTATION
prompt "Display orientation" prompt "Display orientation"
default DISPLAY_ORIENTATION_PORTRAIT if !LV_TFT_DISPLAY_CONTROLLER_SSD1306 default LV_DISPLAY_ORIENTATION_PORTRAIT if !LV_TFT_DISPLAY_CONTROLLER_SSD1306
default DISPLAY_ORIENTATION_LANDSCAPE if LV_TFT_DISPLAY_CONTROLLER_SSD1306 default LV_DISPLAY_ORIENTATION_LANDSCAPE if LV_TFT_DISPLAY_CONTROLLER_SSD1306
config DISPLAY_ORIENTATION_PORTRAIT config LV_DISPLAY_ORIENTATION_PORTRAIT
bool "Portrait" if !LV_TFT_DISPLAY_CONTROLLER_SSD1306 bool "Portrait" if !LV_TFT_DISPLAY_CONTROLLER_SSD1306
config DISPLAY_ORIENTATION_PORTRAIT_INVERTED config LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED
bool "Portrait inverted" if !LV_TFT_DISPLAY_CONTROLLER_SSD1306 bool "Portrait inverted" if !LV_TFT_DISPLAY_CONTROLLER_SSD1306
config DISPLAY_ORIENTATION_LANDSCAPE config LV_DISPLAY_ORIENTATION_LANDSCAPE
bool "Landscape" bool "Landscape"
config DISPLAY_ORIENTATION_LANDSCAPE_INVERTED config LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED
bool "Landscape inverted" bool "Landscape inverted"
endchoice endchoice
config LV_DISPLAY_ORIENTATION config LV_DISPLAY_ORIENTATION
int int
default 0 if DISPLAY_ORIENTATION_PORTRAIT default 0 if LV_DISPLAY_ORIENTATION_PORTRAIT
default 1 if DISPLAY_ORIENTATION_PORTRAIT_INVERTED default 1 if LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED
default 2 if DISPLAY_ORIENTATION_LANDSCAPE default 2 if LV_DISPLAY_ORIENTATION_LANDSCAPE
default 3 if DISPLAY_ORIENTATION_LANDSCAPE_INVERTED default 3 if LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED
config LV_TFT_DISPLAY_OFFSETS config LV_TFT_DISPLAY_OFFSETS
bool bool
@ -212,14 +225,14 @@ menu "LVGL TFT Display controller"
config LV_TFT_DISPLAY_X_OFFSET config LV_TFT_DISPLAY_X_OFFSET
depends on LV_TFT_DISPLAY_OFFSETS depends on LV_TFT_DISPLAY_OFFSETS
int int "X offset"
default 40 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_LANDSCAPE || LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED) default 40 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_LANDSCAPE || LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED)
default 53 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_PORTRAIT || LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED) default 53 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_PORTRAIT || LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED)
default 0 default 0
config LV_TFT_DISPLAY_Y_OFFSET config LV_TFT_DISPLAY_Y_OFFSET
depends on LV_TFT_DISPLAY_OFFSETS depends on LV_TFT_DISPLAY_OFFSETS
int int "Y offset"
default 53 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_LANDSCAPE || LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED) default 53 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_LANDSCAPE || LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED)
default 40 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_PORTRAIT || LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED) default 40 if LV_PREDEFINED_DISPLAY_TTGO && (LV_DISPLAY_ORIENTATION_PORTRAIT || LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED)
default 0 default 0
@ -302,7 +315,7 @@ menu "LVGL TFT Display controller"
config LV_TFT_DISPLAY_USER_CONTROLLER_SSD1306 config LV_TFT_DISPLAY_USER_CONTROLLER_SSD1306
bool "SSD1306" bool "SSD1306"
select LV_TFT_DISPLAY_CONTROLLER_SSD1306 select LV_TFT_DISPLAY_CONTROLLER_SSD1306
select LV_TFT_DISPLAY_PROTOCOL_I2C select LV_I2C_DISPLAY
select LV_TFT_DISPLAY_MONOCHROME select LV_TFT_DISPLAY_MONOCHROME
config LV_TFT_DISPLAY_USER_CONTROLLER_FT81X config LV_TFT_DISPLAY_USER_CONTROLLER_FT81X
bool "FT81X" bool "FT81X"
@ -327,6 +340,15 @@ menu "LVGL TFT Display controller"
bool "RA8875" bool "RA8875"
select LV_TFT_DISPLAY_CONTROLLER_RA8875 select LV_TFT_DISPLAY_CONTROLLER_RA8875
select LV_TFT_DISPLAY_PROTOCOL_SPI select LV_TFT_DISPLAY_PROTOCOL_SPI
config LV_TFT_DISPLAY_USER_CONTROLLER_ILI9163C
bool "ILI9163C"
select LV_TFT_DISPLAY_CONTROLLER_ILI9163C
select LV_TFT_DISPLAY_PROTOCOL_SPI
config LV_TFT_DISPLAY_USER_CONTROLLER_PCD8544
bool "PCD8544"
select LV_TFT_DISPLAY_CONTROLLER_PCD8544
select LV_TFT_DISPLAY_PROTOCOL_SPI
select LV_TFT_DISPLAY_MONOCHROME
endchoice endchoice
config CUSTOM_DISPLAY_BUFFER_SIZE config CUSTOM_DISPLAY_BUFFER_SIZE
@ -446,20 +468,15 @@ menu "LVGL TFT Display controller"
endchoice endchoice
choice choice
prompt "TFT SPI Bus." if LV_TFT_DISPLAY_PROTOCOL_SPI && \ prompt "TFT SPI Bus." if LV_TFT_DISPLAY_PROTOCOL_SPI
!LV_PREDEFINED_DISPLAY_TTGO default LV_TFT_DISPLAY_SPI2_HOST
default LV_TFT_DISPLAY_SPI_VSPI if LV_PREDEFINED_DISPLAY_TTGO && \
!IDF_TARGET_ESP32S2
default LV_TFT_DISPLAY_SPI_FSPI if IDF_TARGET_ESP32S2
help help
Select the SPI Bus the TFT Display is attached to. Select the SPI Bus the TFT Display is attached to.
config LV_TFT_DISPLAY_SPI_HSPI config LV_TFT_DISPLAY_SPI2_HOST
bool "HSPI" bool "SPI2_HOST"
config LV_TFT_DISPLAY_SPI_VSPI config LV_TFT_DISPLAY_SPI3_HOST
bool "VSPI" if !IDF_TARGET_ESP32S2 bool "SPI3_HOST"
config LV_TFT_DISPLAY_SPI_FSPI
bool "FSPI" if IDF_TARGET_ESP32S2
endchoice endchoice
choice choice
@ -490,18 +507,6 @@ menu "LVGL TFT Display controller"
depends on LV_TFT_DISPLAY_SPI_TRANS_MODE_SIO depends on LV_TFT_DISPLAY_SPI_TRANS_MODE_SIO
endchoice endchoice
choice
prompt "Display I2C port" if LV_TFT_DISPLAY_PROTOCOL_I2C
default LV_DISPLAY_I2C_PORT_0
help
Select the I2C port used by the display controller.
config LV_DISPLAY_I2C_PORT_0
bool "I2C PORT 0"
config LV_DISPLAY_I2C_PORT_1
bool "I2C PORT 1"
endchoice
config LV_TFT_USE_CUSTOM_SPI_CLK_DIVIDER config LV_TFT_USE_CUSTOM_SPI_CLK_DIVIDER
bool "Use custom SPI clock frequency." if LV_TFT_DISPLAY_PROTOCOL_SPI bool "Use custom SPI clock frequency." if LV_TFT_DISPLAY_PROTOCOL_SPI
default n default n
@ -579,6 +584,16 @@ menu "LVGL TFT Display controller"
default 80 if LV_TFT_SPI_CLK_DIVIDER_80 default 80 if LV_TFT_SPI_CLK_DIVIDER_80
default 2 default 2
config LV_M5STICKC_HANDLE_AXP192
bool "Handle Backlight and TFT power for M5StickC using AXP192." if LV_PREDEFINED_DISPLAY_M5STICKC || LV_TFT_DISPLAY_CONTROLLER_ST7735S
default y if LV_PREDEFINED_DISPLAY_M5STICKC
select LV_I2C_DISPLAY
help
Display and TFT power supply on M5StickC is controlled using an
AXP192 Power Mangerment IC. Select yes if you want to enable TFT IC
(LDO3) and backlight power using AXP192 by LVGL, or select no if you
want to take care of power management in your own code.
config LV_INVERT_DISPLAY config LV_INVERT_DISPLAY
bool "IN DEPRECATION - Invert display." if LV_TFT_DISPLAY_CONTROLLER_RA8875 bool "IN DEPRECATION - Invert display." if LV_TFT_DISPLAY_CONTROLLER_RA8875
default n default n
@ -586,37 +601,12 @@ menu "LVGL TFT Display controller"
If text is backwards on your display, try enabling this. If text is backwards on your display, try enabling this.
config LV_INVERT_COLORS config LV_INVERT_COLORS
bool "Invert colors in display" if LV_TFT_DISPLAY_CONTROLLER_ILI9341 || LV_TFT_DISPLAY_CONTROLLER_ST7735S || LV_TFT_DISPLAY_CONTROLLER_ILI9481 || LV_TFT_DISPLAY_CONTROLLER_ST7789 || LV_TFT_DISPLAY_CONTROLLER_SSD1306 || LV_TFT_DISPLAY_CONTROLLER_SH1107 || LV_TFT_DISPLAY_CONTROLLER_HX8357 bool "Invert colors in display" if LV_TFT_DISPLAY_CONTROLLER_ILI9341 || LV_TFT_DISPLAY_CONTROLLER_ST7735S || LV_TFT_DISPLAY_CONTROLLER_ILI9481 || LV_TFT_DISPLAY_CONTROLLER_ST7789 || LV_TFT_DISPLAY_CONTROLLER_SSD1306 || LV_TFT_DISPLAY_CONTROLLER_SH1107 || LV_TFT_DISPLAY_CONTROLLER_HX8357 || LV_TFT_DISPLAY_CONTROLLER_GC9A01 || LV_TFT_DISPLAY_CONTROLLER_ILI9163C
default y if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICKC default y if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICKC
help help
If the colors look inverted on your display, try enabling this. If the colors look inverted on your display, try enabling this.
If it didn't help try LVGL configuration -> Swap the 2 bytes of RGB565 color. If it didn't help try LVGL configuration -> Swap the 2 bytes of RGB565 color.
config LV_M5STICKC_HANDLE_AXP192
bool "Handle Backlight and TFT power for M5StickC using AXP192." if LV_PREDEFINED_DISPLAY_M5STICKC || LV_TFT_DISPLAY_CONTROLLER_ST7735S
default y if LV_PREDEFINED_DISPLAY_M5STICKC
help
Display and TFT power supply on M5StickC is controlled using an AXP192 Power Mangerment IC.
Select yes if you want to enable TFT IC (LDO3) and backlight power using AXP192 by LVGL, or select no if you want to take care of
power management in your own code.
config LV_AXP192_PIN_SDA
int "GPIO for AXP192 I2C SDA"
depends on LV_M5STICKC_HANDLE_AXP192
range 0 39
default 21 if LV_PREDEFINED_DISPLAY_M5STICKC
default 21
help
Configure the AXP192 I2C SDA pin here.
config LV_AXP192_PIN_SCL
int "GPIO for AXP192 I2C SCL"
depends on LV_M5STICKC_HANDLE_AXP192
range 0 39
default 22 if LV_PREDEFINED_DISPLAY_M5STICKC
default 22
help
Configure the AXP192 I2C SDA pin here.
# menu will be visible only when LV_PREDEFINED_DISPLAY_NONE is y # menu will be visible only when LV_PREDEFINED_DISPLAY_NONE is y
menu "Display RA8875 Configuration" menu "Display RA8875 Configuration"
@ -757,12 +747,10 @@ menu "LVGL TFT Display controller"
config LV_DISP_SPI_MOSI config LV_DISP_SPI_MOSI
int "GPIO for MOSI (Master Out Slave In)" if LV_TFT_DISPLAY_PROTOCOL_SPI int "GPIO for MOSI (Master Out Slave In)" if LV_TFT_DISPLAY_PROTOCOL_SPI
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 23 if LV_PREDEFINED_DISPLAY_WROVER4 default 23 if LV_PREDEFINED_DISPLAY_WROVER4
default 23 if LV_PREDEFINED_DISPLAY_ATAG default 23 if LV_PREDEFINED_DISPLAY_ATAG
default 23 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK default 23 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK
default 23 if LV_PREDEFINED_DISPLAY_M5CORE2
default 15 if LV_PREDEFINED_DISPLAY_M5STICKC default 15 if LV_PREDEFINED_DISPLAY_M5STICKC
default 18 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING default 18 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING
default 23 if LV_PREDEFINED_PINS_TKOALA default 23 if LV_PREDEFINED_PINS_TKOALA
@ -770,13 +758,13 @@ menu "LVGL TFT Display controller"
default 19 if LV_PREDEFINED_DISPLAY_TTGO_CAMERA_PLUS default 19 if LV_PREDEFINED_DISPLAY_TTGO_CAMERA_PLUS
default 13 if LV_PREDEFINED_DISPLAY_WT32_SC01 default 13 if LV_PREDEFINED_DISPLAY_WT32_SC01
default 13 default 13
help help
Configure the display MOSI pin here. Configure the display MOSI pin here.
config LV_DISPLAY_USE_SPI_MISO config LV_DISPLAY_USE_SPI_MISO
bool "GPIO for MISO (Master In Slave Out)" if LV_TFT_DISPLAY_PROTOCOL_SPI bool "GPIO for MISO (Master In Slave Out)" if LV_TFT_DISPLAY_PROTOCOL_SPI
default y if LV_PREDEFINED_PINS_TKOALA default y if LV_PREDEFINED_PINS_TKOALA
default y if LV_PREDEFINED_DISPLAY_M5CORE2
help help
Enable the MISO signal to control the display. You can disable Enable the MISO signal to control the display. You can disable
it when the display does not need MISO signal to be controlled. it when the display does not need MISO signal to be controlled.
@ -784,10 +772,8 @@ menu "LVGL TFT Display controller"
config LV_DISP_SPI_MISO config LV_DISP_SPI_MISO
int "GPIO for MISO (Master In Slave Out)" if LV_TFT_DISPLAY_PROTOCOL_SPI int "GPIO for MISO (Master In Slave Out)" if LV_TFT_DISPLAY_PROTOCOL_SPI
depends on LV_DISPLAY_USE_SPI_MISO depends on LV_DISPLAY_USE_SPI_MISO
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 19 if LV_PREDEFINED_PINS_TKOALA default 19 if LV_PREDEFINED_PINS_TKOALA
default 38 if LV_PREDEFINED_DISPLAY_M5CORE2
default 0 default 0
help help
@ -805,9 +791,6 @@ menu "LVGL TFT Display controller"
config LV_DISP_SPI_IO2 config LV_DISP_SPI_IO2
int "GPIO for Quad SPI IO2/WP" if LV_TFT_DISPLAY_PROTOCOL_SPI int "GPIO for Quad SPI IO2/WP" if LV_TFT_DISPLAY_PROTOCOL_SPI
depends on LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO depends on LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO
range -1 39 if IDF_TARGET_ESP32
range -1 43 if IDF_TARGET_ESP32S2
default 22 if LV_PREDEFINED_PINS_TKOALA && LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO default 22 if LV_PREDEFINED_PINS_TKOALA && LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO
default -1 default -1
help help
@ -816,9 +799,6 @@ menu "LVGL TFT Display controller"
config LV_DISP_SPI_IO3 config LV_DISP_SPI_IO3
int "GPIO for Quad SPI IO3/HD" if LV_TFT_DISPLAY_PROTOCOL_SPI int "GPIO for Quad SPI IO3/HD" if LV_TFT_DISPLAY_PROTOCOL_SPI
depends on LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO depends on LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO
range -1 39 if IDF_TARGET_ESP32
range -1 43 if IDF_TARGET_ESP32S2
default 21 if LV_PREDEFINED_PINS_TKOALA && LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO default 21 if LV_PREDEFINED_PINS_TKOALA && LV_TFT_DISPLAY_SPI_TRANS_MODE_QIO
default -1 default -1
help help
@ -826,10 +806,8 @@ menu "LVGL TFT Display controller"
config LV_DISP_SPI_CLK config LV_DISP_SPI_CLK
int "GPIO for CLK (SCK / Serial Clock)" if LV_TFT_DISPLAY_PROTOCOL_SPI int "GPIO for CLK (SCK / Serial Clock)" if LV_TFT_DISPLAY_PROTOCOL_SPI
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 18 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK default 18 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK
default 18 if LV_PREDEFINED_DISPLAY_M5CORE2
default 13 if LV_PREDEFINED_DISPLAY_M5STICKC default 13 if LV_PREDEFINED_DISPLAY_M5STICKC
default 18 if LV_PREDEFINED_DISPLAY_ATAG default 18 if LV_PREDEFINED_DISPLAY_ATAG
default 19 if LV_PREDEFINED_DISPLAY_WROVER4 default 19 if LV_PREDEFINED_DISPLAY_WROVER4
@ -853,11 +831,9 @@ menu "LVGL TFT Display controller"
config LV_DISP_SPI_CS config LV_DISP_SPI_CS
int "GPIO for CS (Slave Select)" if LV_TFT_DISPLAY_PROTOCOL_SPI int "GPIO for CS (Slave Select)" if LV_TFT_DISPLAY_PROTOCOL_SPI
depends on LV_DISPLAY_USE_SPI_CS depends on LV_DISPLAY_USE_SPI_CS
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 5 if LV_PREDEFINED_PINS_38V1 default 5 if LV_PREDEFINED_PINS_38V1
default 14 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK default 14 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK
default 5 if LV_PREDEFINED_DISPLAY_M5CORE2
default 5 if LV_PREDEFINED_DISPLAY_M5STICKC default 5 if LV_PREDEFINED_DISPLAY_M5STICKC
default 22 if LV_PREDEFINED_DISPLAY_WROVER4 default 22 if LV_PREDEFINED_DISPLAY_WROVER4
default 15 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING default 15 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING
@ -880,13 +856,11 @@ menu "LVGL TFT Display controller"
config LV_DISP_PIN_DC config LV_DISP_PIN_DC
int "GPIO for DC (Data / Command)" if LV_TFT_DISPLAY_PROTOCOL_SPI int "GPIO for DC (Data / Command)" if LV_TFT_DISPLAY_PROTOCOL_SPI
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
depends on LV_DISPLAY_USE_DC depends on LV_DISPLAY_USE_DC
default 19 if LV_PREDEFINED_PINS_38V1 default 19 if LV_PREDEFINED_PINS_38V1
default 17 if LV_PREDEFINED_PINS_38V4 default 17 if LV_PREDEFINED_PINS_38V4
default 27 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK default 27 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK
default 15 if LV_PREDEFINED_DISPLAY_M5CORE2
default 23 if LV_PREDEFINED_DISPLAY_M5STICKC default 23 if LV_PREDEFINED_DISPLAY_M5STICKC
default 21 if LV_PREDEFINED_DISPLAY_WROVER4 default 21 if LV_PREDEFINED_DISPLAY_WROVER4
default 21 if LV_PREDEFINED_DISPLAY_WT32_SC01 default 21 if LV_PREDEFINED_DISPLAY_WT32_SC01
@ -900,11 +874,22 @@ menu "LVGL TFT Display controller"
help help
Configure the display DC pin here. Configure the display DC pin here.
config LV_DISP_USE_RST
bool "Use a GPIO for resetting the display" if LV_TFT_DISPLAY_PROTOCOL_SPI
default n if LV_PREDEFINED_DISPLAY_M5CORE2
default y
help
Enable display reset control. Set this if the reset pin of the
display is connected to the host. If this is not set, then it is
the user's responsibility to ensure that the display is reset
before initialisation.
You may want to disable this option because the reset pin is not
connected, or is connected to an external component such as the
power management IC.
config LV_DISP_PIN_RST config LV_DISP_PIN_RST
int "GPIO for Reset" if LV_TFT_DISPLAY_PROTOCOL_SPI && !LV_DISP_ST7789_SOFT_RESET int "GPIO for Reset" if LV_TFT_DISPLAY_PROTOCOL_SPI && !LV_DISP_ST7789_SOFT_RESET
range 0 39 if IDF_TARGET_ESP32 depends on LV_DISP_USE_RST
range 0 43 if IDF_TARGET_ESP32S2
default 18 if LV_PREDEFINED_PINS_38V1 default 18 if LV_PREDEFINED_PINS_38V1
default 25 if LV_PREDEFINED_PINS_38V4 default 25 if LV_PREDEFINED_PINS_38V4
default 33 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK default 33 if LV_PREDEFINED_DISPLAY_M5STACK || LV_PREDEFINED_DISPLAY_M5STICK
@ -923,31 +908,66 @@ menu "LVGL TFT Display controller"
config LV_DISP_PIN_BUSY config LV_DISP_PIN_BUSY
int "GPIO for Busy" if LV_TFT_DISPLAY_CONTROLLER_IL3820 || LV_TFT_DISPLAY_CONTROLLER_JD79653A || LV_TFT_DISPLAY_CONTROLLER_UC8151D int "GPIO for Busy" if LV_TFT_DISPLAY_CONTROLLER_IL3820 || LV_TFT_DISPLAY_CONTROLLER_JD79653A || LV_TFT_DISPLAY_CONTROLLER_UC8151D
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 35 if LV_TFT_DISPLAY_CONTROLLER_IL3820 || LV_TFT_DISPLAY_CONTROLLER_JD79653A || LV_TFT_DISPLAY_CONTROLLER_UC8151D default 35 if LV_TFT_DISPLAY_CONTROLLER_IL3820 || LV_TFT_DISPLAY_CONTROLLER_JD79653A || LV_TFT_DISPLAY_CONTROLLER_UC8151D
default 35 default 35 if IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2
default 21 if IDF_TARGET_ESP32C3
help help
Configure the display Busy pin here. Configure the display Busy pin here.
config LV_ENABLE_BACKLIGHT_CONTROL endmenu
bool "Enable control of the display backlight by using an GPIO." if \
( LV_PREDEFINED_DISPLAY_NONE && ! ( LV_TFT_DISPLAY_CONTROLLER_SH1107 || LV_TFT_DISPLAY_CONTROLLER_SSD1306 ) ) \ choice
|| LV_PREDEFINED_DISPLAY_RPI_MPI3501 prompt "Select an I2C port for the display"
default y if LV_PREDEFINED_DISPLAY_M5STACK default LV_I2C_DISPLAY_PORT_0
default y if LV_PREDEFINED_DISPLAY_WROVER4 depends on LV_I2C_DISPLAY
default y if LV_PREDEFINED_DISPLAY_ERTFT0356
default y if LV_PREDEFINED_DISPLAY_TTGO config LV_I2C_DISPLAY_PORT_0
default y if LV_PREDEFINED_DISPLAY_TTGO_CAMERA_PLUS bool
default y if LV_PREDEFINED_DISPLAY_WT32_SC01 prompt "I2C port 0"
help help
Enable controlling the display backlight using an GPIO I2C is shared peripheral managed by I2C Manager. In order to configure I2C Manager (pinout, etc.) see menu
Component config->I2C Port Settings.
config LV_I2C_DISPLAY_PORT_1
bool
prompt "I2C port 1"
help
I2C is shared peripheral managed by I2C Manager. In order to configure I2C Manager (pinout, etc.) see menu
Component config->I2C Port Settings.
endchoice
choice
default LV_DISP_BACKLIGHT_SWITCH
prompt "Backlight Control" if \
(! ( LV_TFT_DISPLAY_CONTROLLER_SH1107 || LV_TFT_DISPLAY_CONTROLLER_SSD1306 ) )
config LV_DISP_BACKLIGHT_OFF
bool
prompt "Not Used"
help
Display backlight is not controlled by this driver, must be hardwired in hardware.
config LV_DISP_BACKLIGHT_SWITCH
bool
prompt "Switch control"
help
Display backlight can be switched on or off.
config LV_DISP_BACKLIGHT_PWM
bool
prompt "PWM control"
help
Display backlight is controlled by pulse-width modulation, allowing brightness settings.
endchoice
config LV_BACKLIGHT_ACTIVE_LVL config LV_BACKLIGHT_ACTIVE_LVL
bool "Is backlight turn on with a HIGH (1) logic level?" bool "Is backlight turn on with a HIGH (1) logic level?" if \
depends on LV_ENABLE_BACKLIGHT_CONTROL ( LV_PREDEFINED_DISPLAY_NONE && ! ( LV_TFT_DISPLAY_CONTROLLER_SH1107 || LV_TFT_DISPLAY_CONTROLLER_SSD1306 ) ) \
|| LV_PREDEFINED_DISPLAY_RPI_MPI3501
depends on !LV_DISP_BACKLIGHT_OFF
default y if LV_PREDEFINED_DISPLAY_M5STACK default y if LV_PREDEFINED_DISPLAY_M5STACK
default y if LV_PREDEFINED_DISPLAY_ERTFT0356 default y if LV_PREDEFINED_DISPLAY_ERTFT0356
default y if LV_PREDEFINED_DISPLAY_TTGO default y if LV_PREDEFINED_DISPLAY_TTGO
@ -959,11 +979,10 @@ menu "LVGL TFT Display controller"
otherwise a 0 will be expected to enable it. otherwise a 0 will be expected to enable it.
config LV_DISP_PIN_BCKL config LV_DISP_PIN_BCKL
int "GPIO for Backlight Control" int "GPIO for Backlight Control" if \
depends on LV_ENABLE_BACKLIGHT_CONTROL ( LV_PREDEFINED_DISPLAY_NONE && ! ( LV_TFT_DISPLAY_CONTROLLER_SH1107 || LV_TFT_DISPLAY_CONTROLLER_SSD1306 ) ) \
range 0 39 if IDF_TARGET_ESP32 || LV_PREDEFINED_DISPLAY_RPI_MPI3501
range 0 43 if IDF_TARGET_ESP32S2 depends on !LV_DISP_BACKLIGHT_OFF
default 23 if LV_PREDEFINED_PINS_38V1 default 23 if LV_PREDEFINED_PINS_38V1
default 26 if LV_PREDEFINED_PINS_38V4 default 26 if LV_PREDEFINED_PINS_38V4
default 32 if LV_PREDEFINED_DISPLAY_M5STACK default 32 if LV_PREDEFINED_DISPLAY_M5STACK
@ -974,33 +993,18 @@ menu "LVGL TFT Display controller"
default 4 if LV_PREDEFINED_DISPLAY_TTGO default 4 if LV_PREDEFINED_DISPLAY_TTGO
default 2 if LV_PREDEFINED_DISPLAY_TTGO_CAMERA_PLUS default 2 if LV_PREDEFINED_DISPLAY_TTGO_CAMERA_PLUS
default 23 if LV_PREDEFINED_DISPLAY_WT32_SC01 default 23 if LV_PREDEFINED_DISPLAY_WT32_SC01
default 27 default -1
help help
Configure the display BCLK (LED) pin here. Configure the display BCLK (LED) pin here.
config LV_DISP_PIN_SDA config LV_I2C
int "GPIO for I2C SDA" if LV_TFT_DISPLAY_PROTOCOL_I2C bool
range 0 39 if IDF_TARGET_ESP32 default y if LV_I2C_DISPLAY
range 0 43 if IDF_TARGET_ESP32S2
default 5 if LV_PREDEFINED_DISPLAY_WEMOS_LOLIN config LV_I2C_DISPLAY_PORT
default 5 int
default 1 if LV_I2C_DISPLAY_PORT_1
help default 0
Configure the I2C SDA pin here.
config LV_DISP_PIN_SCL
int "GPIO for I2C SCL" if LV_TFT_DISPLAY_PROTOCOL_I2C
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 4 if LV_PREDEFINED_DISPLAY_WEMOS_LOLIN
default 4
help
Configure the I2C SCL pin here.
endmenu
endmenu endmenu

View file

@ -4,8 +4,10 @@
#include "disp_driver.h" #include "disp_driver.h"
#include "disp_spi.h" #include "disp_spi.h"
#include "esp_lcd_backlight.h"
#include "sdkconfig.h"
void disp_driver_init(void) void *disp_driver_init(void)
{ {
#if defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9341 #if defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9341
ili9341_init(); ili9341_init();
@ -39,6 +41,35 @@ void disp_driver_init(void)
jd79653a_init(); jd79653a_init();
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D #elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D
uc8151d_init(); uc8151d_init();
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9163C
ili9163c_init();
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544
pcd8544_init();
#endif
// We still use menuconfig for these settings
// It will be set up during runtime in the future
#if (defined(CONFIG_LV_DISP_BACKLIGHT_SWITCH) || defined(CONFIG_LV_DISP_BACKLIGHT_PWM))
const disp_backlight_config_t bckl_config = {
.gpio_num = CONFIG_LV_DISP_PIN_BCKL,
#if defined CONFIG_LV_DISP_BACKLIGHT_PWM
.pwm_control = true,
#else
.pwm_control = false,
#endif
#if defined CONFIG_LV_BACKLIGHT_ACTIVE_LVL
.output_invert = false, // Backlight on high
#else
.output_invert = true, // Backlight on low
#endif
.timer_idx = 0,
.channel_idx = 0 // @todo this prevents us from having two PWM controlled displays
};
disp_backlight_h bckl_handle = disp_backlight_new(&bckl_config);
disp_backlight_set(bckl_handle, 100);
return bckl_handle;
#else
return NULL;
#endif #endif
} }
@ -76,6 +107,10 @@ void disp_driver_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t *
jd79653a_lv_fb_flush(drv, area, color_map); jd79653a_lv_fb_flush(drv, area, color_map);
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D #elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D
uc8151d_lv_fb_flush(drv, area, color_map); uc8151d_lv_fb_flush(drv, area, color_map);
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9163C
ili9163c_flush(drv, area, color_map);
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544
pcd8544_flush(drv, area, color_map);
#endif #endif
} }
@ -91,6 +126,8 @@ void disp_driver_rounder(lv_disp_drv_t * disp_drv, lv_area_t * area)
jd79653a_lv_rounder_cb(disp_drv, area); jd79653a_lv_rounder_cb(disp_drv, area);
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D #elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D
uc8151d_lv_rounder_cb(disp_drv, area); uc8151d_lv_rounder_cb(disp_drv, area);
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544
pcd8544_rounder(disp_drv, area);
#endif #endif
} }
@ -107,5 +144,7 @@ void disp_driver_set_px(lv_disp_drv_t * disp_drv, uint8_t * buf, lv_coord_t buf_
jd79653a_lv_set_fb_cb(disp_drv, buf, buf_w, x, y, color, opa); jd79653a_lv_set_fb_cb(disp_drv, buf, buf_w, x, y, color, opa);
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D #elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D
uc8151d_lv_set_fb_cb(disp_drv, buf, buf_w, x, y, color, opa); uc8151d_lv_set_fb_cb(disp_drv, buf, buf_w, x, y, color, opa);
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544
pcd8544_set_px_cb(disp_drv, buf, buf_w, x, y, color, opa);
#endif #endif
} }

View file

@ -50,6 +50,10 @@ extern "C" {
#include "jd79653a.h" #include "jd79653a.h"
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D #elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_UC8151D
#include "uc8151d.h" #include "uc8151d.h"
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_ILI9163C
#include "ili9163c.h"
#elif defined CONFIG_LV_TFT_DISPLAY_CONTROLLER_PCD8544
#include "pcd8544.h"
#endif #endif
/********************* /*********************
@ -65,7 +69,7 @@ extern "C" {
**********************/ **********************/
/* Initialize display */ /* Initialize display */
void disp_driver_init(void); void *disp_driver_init(void);
/* Display flush callback */ /* Display flush callback */
void disp_driver_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void disp_driver_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);

View file

@ -310,7 +310,12 @@ static void IRAM_ATTR spi_ready(spi_transaction_t *trans)
disp = lv_refr_get_disp_refreshing(); disp = lv_refr_get_disp_refreshing();
#endif #endif
#if LVGL_VERSION_MAJOR < 8
lv_disp_flush_ready(&disp->driver); lv_disp_flush_ready(&disp->driver);
#else
lv_disp_flush_ready(disp->driver);
#endif
} }
if (chained_post_cb) { if (chained_post_cb) {

View file

@ -0,0 +1,107 @@
/**
* @file esp_lcd_backlight.c
*
*/
/*********************
* INCLUDES
*********************/
#include "esp_lcd_backlight.h"
#include "driver/ledc.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "soc/ledc_periph.h" // to invert LEDC output on IDF version < v4.3
typedef struct {
bool pwm_control; // true: LEDC is used, false: GPIO is used
int index; // Either GPIO or LEDC channel
} disp_backlight_t;
static const char *TAG = "disp_backlight";
disp_backlight_h disp_backlight_new(const disp_backlight_config_t *config)
{
// Check input parameters
if (config == NULL)
return NULL;
if (!GPIO_IS_VALID_OUTPUT_GPIO(config->gpio_num)) {
ESP_LOGW(TAG, "Invalid GPIO number");
return NULL;
}
disp_backlight_t *bckl_dev = calloc(1, sizeof(disp_backlight_t));
if (bckl_dev == NULL){
ESP_LOGW(TAG, "Not enough memory");
return NULL;
}
if (config->pwm_control){
// Configure LED (Backlight) pin as PWM for Brightness control.
bckl_dev->pwm_control = true;
bckl_dev->index = config->channel_idx;
const ledc_channel_config_t LCD_backlight_channel = {
.gpio_num = config->gpio_num,
.speed_mode = LEDC_LOW_SPEED_MODE,
.channel = config->channel_idx,
.intr_type = LEDC_INTR_DISABLE,
.timer_sel = config->timer_idx,
.duty = 0,
.hpoint = 0
};
const ledc_timer_config_t LCD_backlight_timer = {
.speed_mode = LEDC_LOW_SPEED_MODE,
.bit_num = LEDC_TIMER_10_BIT,
.timer_num = config->timer_idx,
.freq_hz = 5000,
.clk_cfg = LEDC_AUTO_CLK};
ESP_ERROR_CHECK(ledc_timer_config(&LCD_backlight_timer));
ESP_ERROR_CHECK(ledc_channel_config(&LCD_backlight_channel));
gpio_matrix_out(config->gpio_num, ledc_periph_signal[LEDC_LOW_SPEED_MODE].sig_out0_idx + config->channel_idx, config->output_invert, 0);
}
else
{
// Configure GPIO for output
bckl_dev->index = config->gpio_num;
gpio_pad_select_gpio(config->gpio_num);
ESP_ERROR_CHECK(gpio_set_direction(config->gpio_num, GPIO_MODE_OUTPUT));
gpio_matrix_out(config->gpio_num, SIG_GPIO_OUT_IDX, config->output_invert, false);
}
return (disp_backlight_h)bckl_dev;
}
void disp_backlight_set(disp_backlight_h bckl, int brightness_percent)
{
// Check input paramters
if (bckl == NULL)
return;
if (brightness_percent > 100)
brightness_percent = 100;
if (brightness_percent < 0)
brightness_percent = 0;
disp_backlight_t *bckl_dev = (disp_backlight_t *) bckl;
ESP_LOGI(TAG, "Setting LCD backlight: %d%%", brightness_percent);
if (bckl_dev->pwm_control) {
uint32_t duty_cycle = (1023 * brightness_percent) / 100; // LEDC resolution set to 10bits, thus: 100% = 1023
ESP_ERROR_CHECK(ledc_set_duty(LEDC_LOW_SPEED_MODE, bckl_dev->index, duty_cycle));
ESP_ERROR_CHECK(ledc_update_duty(LEDC_LOW_SPEED_MODE, bckl_dev->index));
} else {
ESP_ERROR_CHECK(gpio_set_level(bckl_dev->index, brightness_percent));
}
}
void disp_backlight_delete(disp_backlight_h bckl)
{
if (bckl == NULL)
return;
disp_backlight_t *bckl_dev = (disp_backlight_t *) bckl;
if (bckl_dev->pwm_control) {
ledc_stop(LEDC_LOW_SPEED_MODE, bckl_dev->index, 0);
} else {
gpio_reset_pin(bckl_dev->index);
}
free (bckl);
}

View file

@ -0,0 +1,67 @@
/**
* @file esp_lcd_backlight.h
*/
#ifndef ESP_LCD_BACKLIGHT_H
#define ESP_LCD_BACKLIGHT_H
/*********************
* INCLUDES
*********************/
#include <stdbool.h>
#ifdef __cplusplus
extern "C" { /* extern "C" */
#endif
/**********************
* GLOBAL PROTOTYPES
**********************/
/**
* @brief Display backlight controller handle
*
*/
typedef void * disp_backlight_h;
/**
* @brief Configuration structure of backlight controller
*
* Must be passed to disp_backlight_new() for correct configuration
*/
typedef struct {
bool pwm_control;
bool output_invert;
int gpio_num; // see gpio_num_t
// Relevant only for PWM controlled backlight
// Ignored for switch (ON/OFF) backlight control
int timer_idx; // ledc_timer_t
int channel_idx; // ledc_channel_t
} disp_backlight_config_t;
/**
* @brief Create new backlight controller
*
* @param[in] config Configuration structure of backlight controller
* @return Display backlight controller handle
*/
disp_backlight_h disp_backlight_new(const disp_backlight_config_t *config);
/**
* @brief Set backlight
*
* Brightness parameter can be 0-100 for PWM controlled backlight.
* GPIO controlled backlight (ON/OFF) is turned off witch value 0 and turned on with any positive value.
*
* @param bckl Backlight controller handle
* @param[in] brightness_percent Brightness in [%]
*/
void disp_backlight_set(disp_backlight_h bckl, int brightness_percent);
void disp_backlight_delete(disp_backlight_h bckl);
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif /*ESP_LCD_BACKLIGHT_H*/

View file

@ -162,19 +162,22 @@ void hx8357_init(void)
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(HX8357_DC); gpio_reset_pin(HX8357_DC);
gpio_set_direction(HX8357_DC, GPIO_MODE_OUTPUT); gpio_set_direction(HX8357_DC, GPIO_MODE_OUTPUT);
#if HX8357_USE_RST
gpio_reset_pin(HX8357_RST); gpio_reset_pin(HX8357_RST);
gpio_set_direction(HX8357_RST, GPIO_MODE_OUTPUT); gpio_set_direction(HX8357_RST, GPIO_MODE_OUTPUT);
#if HX8357_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(HX8357_BCKL);
gpio_set_direction(HX8357_BCKL, GPIO_MODE_OUTPUT);
#endif
//Reset the display //Reset the display
gpio_set_level(HX8357_RST, 0); gpio_set_level(HX8357_RST, 0);
vTaskDelay(10 / portTICK_PERIOD_MS); vTaskDelay(10 / portTICK_PERIOD_MS);
gpio_set_level(HX8357_RST, 1); gpio_set_level(HX8357_RST, 1);
vTaskDelay(120 / portTICK_PERIOD_MS); vTaskDelay(120 / portTICK_PERIOD_MS);
#endif
#if HX8357_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(HX8357_BCKL);
gpio_set_direction(HX8357_BCKL, GPIO_MODE_OUTPUT);
#endif
ESP_LOGI(TAG, "Initialization."); ESP_LOGI(TAG, "Initialization.");
@ -205,8 +208,6 @@ void hx8357_init(void)
#else #else
hx8357_send_cmd(HX8357_INVOFF); hx8357_send_cmd(HX8357_INVOFF);
#endif #endif
hx8357_enable_backlight(true);
} }
@ -243,23 +244,6 @@ void hx8357_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
hx8357_send_color((void*)color_map, size * 2); hx8357_send_color((void*)color_map, size * 2);
} }
void hx8357_enable_backlight(bool backlight)
{
#if HX8357_ENABLE_BACKLIGHT_CONTROL
ESP_LOGD(TAG, "%s backlight.\n", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (HX8357_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(HX8357_BCKL, tmp);
#endif
}
void hx8357_set_rotation(uint8_t r) void hx8357_set_rotation(uint8_t r)
{ {
r = r & 3; // can't be higher than 3 r = r & 3; // can't be higher than 3

View file

@ -37,17 +37,9 @@ extern "C" {
*********************/ *********************/
#define HX8357_DC CONFIG_LV_DISP_PIN_DC #define HX8357_DC CONFIG_LV_DISP_PIN_DC
#define HX8357_RST CONFIG_LV_DISP_PIN_RST #define HX8357_RST CONFIG_LV_DISP_PIN_RST
#define HX8357_BCKL CONFIG_LV_DISP_PIN_BCKL #define HX8357_USE_RST CONFIG_LV_DISP_USE_RST
#define HX8357_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#define HX8357_INVERT_COLORS CONFIG_LV_INVERT_COLORS #define HX8357_INVERT_COLORS CONFIG_LV_INVERT_COLORS
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define HX8357_BCKL_ACTIVE_LVL 1
#else
#define HX8357_BCKL_ACTIVE_LVL 0
#endif
/******************* /*******************
* HX8357B/D REGS * HX8357B/D REGS
@ -135,7 +127,6 @@ extern "C" {
void hx8357_init(void); void hx8357_init(void);
void hx8357_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void hx8357_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void hx8357_enable_backlight(bool backlight);
void hx8357_set_rotation(uint8_t r); void hx8357_set_rotation(uint8_t r);
/********************** /**********************

View file

@ -198,16 +198,20 @@ void il3820_init(void)
/* Initialize non-SPI GPIOs */ /* Initialize non-SPI GPIOs */
gpio_reset_pin(IL3820_DC_PIN); gpio_reset_pin(IL3820_DC_PIN);
gpio_set_direction(IL3820_DC_PIN, GPIO_MODE_OUTPUT); gpio_set_direction(IL3820_DC_PIN, GPIO_MODE_OUTPUT);
gpio_reset_pin(IL3820_RST_PIN);
gpio_set_direction(IL3820_RST_PIN, GPIO_MODE_OUTPUT);
gpio_reset_pin(IL3820_BUSY_PIN); gpio_reset_pin(IL3820_BUSY_PIN);
gpio_set_direction(IL3820_BUSY_PIN, GPIO_MODE_INPUT); gpio_set_direction(IL3820_BUSY_PIN, GPIO_MODE_INPUT);
#if IL3820_USE_RST
gpio_reset_pin(IL3820_RST_PIN);
gpio_set_direction(IL3820_RST_PIN, GPIO_MODE_OUTPUT);
/* Harware reset */ /* Harware reset */
gpio_set_level( IL3820_RST_PIN, 0); gpio_set_level( IL3820_RST_PIN, 0);
vTaskDelay(IL3820_RESET_DELAY / portTICK_PERIOD_MS); vTaskDelay(IL3820_RESET_DELAY / portTICK_PERIOD_MS);
gpio_set_level( IL3820_RST_PIN, 1); gpio_set_level( IL3820_RST_PIN, 1);
vTaskDelay(IL3820_RESET_DELAY / portTICK_PERIOD_MS); vTaskDelay(IL3820_RESET_DELAY / portTICK_PERIOD_MS);
#endif
/* Software reset */ /* Software reset */
il3820_write_cmd(IL3820_CMD_SW_RESET, NULL, 0); il3820_write_cmd(IL3820_CMD_SW_RESET, NULL, 0);

View file

@ -28,6 +28,7 @@ extern "C"
#define IL3820_DC_PIN CONFIG_LV_DISP_PIN_DC #define IL3820_DC_PIN CONFIG_LV_DISP_PIN_DC
#define IL3820_RST_PIN CONFIG_LV_DISP_PIN_RST #define IL3820_RST_PIN CONFIG_LV_DISP_PIN_RST
#define IL3820_USE_RST CONFIG_LV_DISP_USE_RST
#define IL3820_BUSY_PIN CONFIG_LV_DISP_PIN_BUSY #define IL3820_BUSY_PIN CONFIG_LV_DISP_PIN_BUSY
#define IL3820_BUSY_LEVEL 1 #define IL3820_BUSY_LEVEL 1

248
lvgl_tft/ili9163c.c Normal file
View file

@ -0,0 +1,248 @@
/**
* @file ILI9163C.c
*
*/
/*********************
* INCLUDES
*********************/
#include "ili9163c.h"
#include "disp_spi.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "assert.h"
/*********************
* DEFINES
*********************/
#define TAG "ILI9163C"
// ILI9163C specific commands used in init
#define ILI9163C_NOP 0x00
#define ILI9163C_SWRESET 0x01
#define ILI9163C_RDDID 0x04
#define ILI9163C_RDDST 0x09
#define ILI9163C_SLPIN 0x10
#define ILI9163C_SLPOUT 0x11
#define ILI9163C_PTLON 0x12
#define ILI9163C_NORON 0x13
#define ILI9163C_INVOFF 0x20
#define ILI9163C_INVON 0x21
#define ILI9163C_CMD_GAMST 0x26
#define ILI9163C_DISPOFF 0x28
#define ILI9163C_DISPON 0x29
#define ILI9163C_CASET 0x2A
#define ILI9163C_RASET 0x2B
#define ILI9163C_RAMWR 0x2C
#define ILI9163C_COLORSET 0x2D
#define ILI9163C_RAMRD 0x2E
#define ILI9163C_PTLAR 0x30
#define ILI9163C_VSCRDEF 0x33
#define ILI9163C_COLMOD 0x3A
#define ILI9163C_MADCTL 0x36
#define ILI9163C_VSCRSADD 0x37
#define ILI9163C_FRMCTR1 0xB1
#define ILI9163C_FRMCTR2 0xB2
#define ILI9163C_FRMCTR3 0xB3
#define ILI9163C_INVCTR 0xB4
#define ILI9163C_DISSET5 0xB6
#define ILI9163C_SDDC 0xB7
#define ILI9163C_PWCTR1 0xC0
#define ILI9163C_PWCTR2 0xC1
#define ILI9163C_PWCTR3 0xC2
#define ILI9163C_PWCTR4 0xC3
#define ILI9163C_PWCTR5 0xC4
#define ILI9163C_VMCTR1 0xC5
#define ILI9163C_VMCOFFS 0xC7
#define ILI9163C_GAMCTL 0xF2
#define ILI9163C_GMCTRP1 0xE0
#define ILI9163C_GMCTRN1 0xE1
#define ST77XX_MADCTL_MY 0x80
#define ST77XX_MADCTL_MX 0x40
#define ST77XX_MADCTL_MV 0x20 #define
#define ST77XX_MADCTL_ML 0x10
#define ST77XX_MADCTL_RGB 0x00
#define ST77XX_MADCTL_BGR 0x08
/**********************
* TYPEDEFS
**********************/
/*The LCD needs a bunch of command/argument values to be initialized. They are stored in this struct. */
typedef struct
{
uint8_t cmd;
uint8_t data[16];
uint8_t databytes; //No of data in data; bit 7 = delay after set; 0xFF = end of cmds.
} lcd_init_cmd_t;
/**********************
* STATIC PROTOTYPES
**********************/
static void ili9163c_set_orientation(uint8_t orientation);
static void ili9163c_send_cmd(uint8_t cmd);
static void ili9163c_send_data(void *data, uint16_t length);
static void ili9163c_send_color(void *data, uint16_t length);
/**********************
* STATIC VARIABLES
**********************/
/**********************
* MACROS
**********************/
/**********************
* GLOBAL FUNCTIONS
**********************/
void ili9163c_init(void)
{
ESP_LOGD(TAG, "Init");
lcd_init_cmd_t ili_init_cmds[] = {
{ILI9163C_SWRESET, {0}, 0x80}, // Software reset, 0 args, w/delay 120ms
{ILI9163C_SLPOUT, {0}, 0x80}, // Out of sleep mode, 0 args, w/delay 5ms
{ILI9163C_CMD_GAMST, {0x04}, 1}, // Gamma Curve
{ILI9163C_FRMCTR1, {0x0C, 0x14}, 2}, // Frame rate ctrl - normal mode
{ILI9163C_INVCTR, {0x07}, 1}, // Display inversion ctrl, 1 arg, no delay:No inversion
{ILI9163C_PWCTR1, {0x0C, 0x05}, 2}, // Power control, 2 args, no delay
{ILI9163C_PWCTR2, {0x02}, 1}, // Power control, 1 arg
{ILI9163C_PWCTR3, {0x02}, 1}, // Power control, 1 arg
{ILI9163C_VMCTR1, {0x20, 0x55}, 2}, // Power control, 1 arg, no delay:
{ILI9163C_VMCOFFS, {0x40}, 1}, // VCOM Offset
#if ILI9163C_INVERT_COLORS == 1
{ILI9163C_INVON, {0}, 0}, // set inverted mode
#else
{ILI9163C_INVOFF, {0}, 0}, // set non-inverted mode
#endif
{ILI9163C_COLMOD, {0x5}, 1}, // set color mode, 1 arg, no delay: 16-bit color
{ILI9163C_SDDC, {0}, 1}, // set source driver direction control
{ILI9163C_GAMCTL, {0x01}, 1}, // set source driver direction control
{ILI9163C_GMCTRP1, {0x36, 0x29, 0x12, 0x22, 0x1C, 0x15, 0x42, 0xB7, 0x2F, 0x13, 0x12, 0x0A, 0x11, 0x0B, 0x06}, 16}, // 16 args, no delay:
{ILI9163C_GMCTRN1, {0x09, 0x16, 0x2D, 0x0D, 0x13, 0x15, 0x40, 0x48, 0x53, 0x0C, 0x1D, 0x25, 0x2E, 0x34, 0x39}, 16}, // 16 args, no delay:
{ILI9163C_NORON, {0}, 0x80}, // Normal display on, no args, w/delay 10 ms delay
{ILI9163C_DISPON, {0}, 0x80}, // Main screen turn on, no args w/delay 100 ms delay
{0, {0}, 0xff}
};
//Initialize non-SPI GPIOs
gpio_reset_pin(ILI9163C_DC);
gpio_set_direction(ILI9163C_DC, GPIO_MODE_OUTPUT);
gpio_reset_pin(ILI9163C_RST);
gpio_set_direction(ILI9163C_RST, GPIO_MODE_OUTPUT);
//Reset the display
gpio_set_level(ILI9163C_RST, 0);
vTaskDelay(100 / portTICK_RATE_MS);
gpio_set_level(ILI9163C_RST, 1);
vTaskDelay(150 / portTICK_RATE_MS);
//Send all the commands
uint16_t cmd = 0;
while (ili_init_cmds[cmd].databytes != 0xff)
{
ili9163c_send_cmd(ili_init_cmds[cmd].cmd);
ili9163c_send_data(ili_init_cmds[cmd].data, ili_init_cmds[cmd].databytes & 0x1F);
if (ili_init_cmds[cmd].databytes & 0x80)
{
vTaskDelay(150 / portTICK_RATE_MS);
}
cmd++;
}
ili9163c_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
}
void ili9163c_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map)
{
uint8_t data[4];
/*Column addresses*/
ili9163c_send_cmd(ILI9163C_CASET);
data[0] = (area->x1 >> 8) & 0xFF;
data[1] = area->x1 & 0xFF;
data[2] = (area->x2 >> 8) & 0xFF;
data[3] = area->x2 & 0xFF;
ili9163c_send_data(data, 4);
/*Page addresses*/
ili9163c_send_cmd(ILI9163C_RASET);
data[0] = (area->y1 >> 8) & 0xFF;
data[1] = area->y1 & 0xFF;
data[2] = (area->y2 >> 8) & 0xFF;
data[3] = area->y2 & 0xFF;
ili9163c_send_data(data, 4);
/*Memory write*/
ili9163c_send_cmd(ILI9163C_RAMWR);
uint32_t size = lv_area_get_width(area) * lv_area_get_height(area);
ili9163c_send_color((void *)color_map, size * 2);
}
void ili9163c_sleep_in()
{
uint8_t data[] = {0x08};
ili9163c_send_cmd(ILI9163C_SLPIN);
ili9163c_send_data(&data, 1);
}
void ili9163c_sleep_out()
{
uint8_t data[] = {0x08};
ili9163c_send_cmd(ILI9163C_SLPOUT);
ili9163c_send_data(&data, 1);
}
/**********************
* STATIC FUNCTIONS
**********************/
static void ili9163c_send_cmd(uint8_t cmd)
{
disp_wait_for_pending_transactions();
gpio_set_level(ILI9163C_DC, 0); /*Command mode*/
disp_spi_send_data(&cmd, 1);
}
static void ili9163c_send_data(void *data, uint16_t length)
{
disp_wait_for_pending_transactions();
gpio_set_level(ILI9163C_DC, 1); /*Data mode*/
disp_spi_send_data(data, length);
}
static void ili9163c_send_color(void *data, uint16_t length)
{
disp_wait_for_pending_transactions();
gpio_set_level(ILI9163C_DC, 1); /*Data mode*/
disp_spi_send_colors(data, length);
}
static void ili9163c_set_orientation(uint8_t orientation)
{
assert(orientation < 4);
const char *orientation_str[] = {
"PORTRAIT", "PORTRAIT_INVERTED", "LANDSCAPE", "LANDSCAPE_INVERTED"};
ESP_LOGD(TAG, "Display orientation: %s", orientation_str[orientation]);
uint8_t data[] = {0x48, 0x88, 0xA8, 0x68};
ili9163c_send_cmd(ILI9163C_MADCTL);
ili9163c_send_data((void *)&data[orientation], 1);
}

54
lvgl_tft/ili9163c.h Normal file
View file

@ -0,0 +1,54 @@
/**
* @file lv_templ.h
*
*/
#ifndef ILI9163C_H
#define ILI9163C_H
#ifdef __cplusplus
extern "C"
{
#endif
/*********************
* INCLUDES
*********************/
#include <stdbool.h>
#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif
#include "../lvgl_helpers.h"
/*********************
* DEFINES
*********************/
#define ILI9163C_DC CONFIG_LV_DISP_PIN_DC
#define ILI9163C_RST CONFIG_LV_DISP_PIN_RST
#define ILI9163C_INVERT_COLORS CONFIG_LV_INVERT_COLORS
/**********************
* TYPEDEFS
**********************/
/**********************
* GLOBAL PROTOTYPES
**********************/
void ili9163c_init(void);
void ili9163c_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map);
void ili9163c_sleep_in(void);
void ili9163c_sleep_out(void);
/**********************
* MACROS
**********************/
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif /*ILI9163C_H*/

View file

@ -80,31 +80,25 @@ void ili9341_init(void)
{0, {0}, 0xff}, {0, {0}, 0xff},
}; };
#if ILI9341_BCKL == 15
gpio_config_t io_conf;
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = GPIO_SEL_15;
io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
gpio_config(&io_conf);
#endif
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(ILI9341_DC); gpio_reset_pin(ILI9341_DC);
gpio_set_direction(ILI9341_DC, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9341_DC, GPIO_MODE_OUTPUT);
#if ILI9341_USE_RST
gpio_reset_pin(ILI9341_RST); gpio_reset_pin(ILI9341_RST);
gpio_set_direction(ILI9341_RST, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9341_RST, GPIO_MODE_OUTPUT);
#if ILI9341_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9341_BCKL);
gpio_set_direction(ILI9341_BCKL, GPIO_MODE_OUTPUT);
#endif
//Reset the display //Reset the display
gpio_set_level(ILI9341_RST, 0); gpio_set_level(ILI9341_RST, 0);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(ILI9341_RST, 1); gpio_set_level(ILI9341_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
#if ILI9341_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9341_BCKL);
gpio_set_direction(ILI9341_BCKL, GPIO_MODE_OUTPUT);
#endif
ESP_LOGI(TAG, "Initialization."); ESP_LOGI(TAG, "Initialization.");
@ -119,8 +113,6 @@ void ili9341_init(void)
cmd++; cmd++;
} }
ili9341_enable_backlight(true);
ili9341_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION); ili9341_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
#if ILI9341_INVERT_COLORS == 1 #if ILI9341_INVERT_COLORS == 1
@ -153,29 +145,10 @@ void ili9341_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
/*Memory write*/ /*Memory write*/
ili9341_send_cmd(0x2C); ili9341_send_cmd(0x2C);
uint32_t size = lv_area_get_width(area) * lv_area_get_height(area); uint32_t size = lv_area_get_width(area) * lv_area_get_height(area);
ili9341_send_color((void*)color_map, size * 2); ili9341_send_color((void*)color_map, size * 2);
} }
void ili9341_enable_backlight(bool backlight)
{
#if ILI9341_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (ILI9341_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(ILI9341_BCKL, tmp);
#endif
}
void ili9341_sleep_in() void ili9341_sleep_in()
{ {
uint8_t data[] = {0x08}; uint8_t data[] = {0x08};
@ -228,8 +201,10 @@ static void ili9341_set_orientation(uint8_t orientation)
#if defined CONFIG_LV_PREDEFINED_DISPLAY_M5STACK #if defined CONFIG_LV_PREDEFINED_DISPLAY_M5STACK
uint8_t data[] = {0x68, 0x68, 0x08, 0x08}; uint8_t data[] = {0x68, 0x68, 0x08, 0x08};
#elif defined (CONFIG_LV_PREDEFINED_DISPLAY_M5CORE2)
uint8_t data[] = {0x08, 0x88, 0x28, 0xE8};
#elif defined (CONFIG_LV_PREDEFINED_DISPLAY_WROVER4) #elif defined (CONFIG_LV_PREDEFINED_DISPLAY_WROVER4)
uint8_t data[] = {0x4C, 0x88, 0x28, 0xE8}; uint8_t data[] = {0x6C, 0xEC, 0xCC, 0x4C};
#elif defined (CONFIG_LV_PREDEFINED_DISPLAY_NONE) #elif defined (CONFIG_LV_PREDEFINED_DISPLAY_NONE)
uint8_t data[] = {0x48, 0x88, 0x28, 0xE8}; uint8_t data[] = {0x48, 0x88, 0x28, 0xE8};
#endif #endif

View file

@ -20,23 +20,15 @@ extern "C" {
#else #else
#include "lvgl/lvgl.h" #include "lvgl/lvgl.h"
#endif #endif
#include "../lvgl_helpers.h"
#include "sdkconfig.h"
/********************* /*********************
* DEFINES * DEFINES
*********************/ *********************/
#define ILI9341_DC CONFIG_LV_DISP_PIN_DC #define ILI9341_DC CONFIG_LV_DISP_PIN_DC
#define ILI9341_USE_RST CONFIG_LV_DISP_USE_RST
#define ILI9341_RST CONFIG_LV_DISP_PIN_RST #define ILI9341_RST CONFIG_LV_DISP_PIN_RST
#define ILI9341_BCKL CONFIG_LV_DISP_PIN_BCKL
#define ILI9341_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define ILI9341_BCKL_ACTIVE_LVL 1
#else
#define ILI9341_BCKL_ACTIVE_LVL 0
#endif
#define ILI9341_INVERT_COLORS CONFIG_LV_INVERT_COLORS #define ILI9341_INVERT_COLORS CONFIG_LV_INVERT_COLORS
/********************** /**********************
@ -49,7 +41,6 @@ extern "C" {
void ili9341_init(void); void ili9341_init(void);
void ili9341_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void ili9341_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void ili9341_enable_backlight(bool backlight);
void ili9341_sleep_in(void); void ili9341_sleep_in(void);
void ili9341_sleep_out(void); void ili9341_sleep_out(void);

View file

@ -76,19 +76,22 @@ void ili9481_init(void)
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(ILI9481_DC); gpio_reset_pin(ILI9481_DC);
gpio_set_direction(ILI9481_DC, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9481_DC, GPIO_MODE_OUTPUT);
#if ILI9481_USE_RST
gpio_reset_pin(ILI9481_RST); gpio_reset_pin(ILI9481_RST);
gpio_set_direction(ILI9481_RST, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9481_RST, GPIO_MODE_OUTPUT);
#if ILI9481_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9481_BCKL);
gpio_set_direction(ILI9481_BCKL, GPIO_MODE_OUTPUT);
#endif
//Reset the display //Reset the display
gpio_set_level(ILI9481_RST, 0); gpio_set_level(ILI9481_RST, 0);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(ILI9481_RST, 1); gpio_set_level(ILI9481_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
#if ILI9481_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9481_BCKL);
gpio_set_direction(ILI9481_BCKL, GPIO_MODE_OUTPUT);
#endif
ESP_LOGI(TAG, "ILI9481 initialization."); ESP_LOGI(TAG, "ILI9481 initialization.");
@ -107,8 +110,6 @@ void ili9481_init(void)
cmd++; cmd++;
} }
ili9481_enable_backlight(true);
ili9481_set_orientation(ILI9481_DISPLAY_ORIENTATION); ili9481_set_orientation(ILI9481_DISPLAY_ORIENTATION);
} }
@ -168,22 +169,6 @@ void ili9481_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
heap_caps_free(mybuf); heap_caps_free(mybuf);
} }
void ili9481_enable_backlight(bool backlight)
{
#if ILI9481_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (ILI9481_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(ILI9481_BCKL, tmp);
#endif
}
/********************** /**********************
* STATIC FUNCTIONS * STATIC FUNCTIONS
**********************/ **********************/

View file

@ -27,17 +27,10 @@ extern "C" {
*********************/ *********************/
#define ILI9481_DC CONFIG_LV_DISP_PIN_DC #define ILI9481_DC CONFIG_LV_DISP_PIN_DC
#define ILI9481_RST CONFIG_LV_DISP_PIN_RST #define ILI9481_RST CONFIG_LV_DISP_PIN_RST
#define ILI9481_BCKL CONFIG_LV_DISP_PIN_BCKL #define ILI9481_USE_RST CONFIG_LV_DISP_USE_RST
#define ILI9481_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#define ILI9481_INVERT_COLORS CONFIG_LV_INVERT_COLORS #define ILI9481_INVERT_COLORS CONFIG_LV_INVERT_COLORS
#define ILI9481_DISPLAY_ORIENTATION CONFIG_LV_DISPLAY_ORIENTATION #define ILI9481_DISPLAY_ORIENTATION CONFIG_LV_DISPLAY_ORIENTATION
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define ILI9481_BCKL_ACTIVE_LVL 1
#else
#define ILI9481_BCKL_ACTIVE_LVL 0
#endif
/******************* /*******************
* ILI9481 REGS * ILI9481 REGS
@ -117,7 +110,6 @@ extern "C" {
void ili9481_init(void); void ili9481_init(void);
void ili9481_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void ili9481_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void ili9481_enable_backlight(bool backlight);
/********************** /**********************
* MACROS * MACROS

View file

@ -65,32 +65,25 @@ void ili9486_init(void)
{0x00, {0}, 0xff}, {0x00, {0}, 0xff},
}; };
#if ILI9486_BCKL == 15
gpio_config_t io_conf;
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = GPIO_SEL_15;
io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
gpio_config(&io_conf);
#endif
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(ILI9486_DC); gpio_reset_pin(ILI9486_DC);
gpio_set_direction(ILI9486_DC, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9486_DC, GPIO_MODE_OUTPUT);
#if ILI9486_USE_RST
gpio_reset_pin(ILI9486_RST); gpio_reset_pin(ILI9486_RST);
gpio_set_direction(ILI9486_RST, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9486_RST, GPIO_MODE_OUTPUT);
#if ILI9486_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9486_BCKL);
gpio_set_direction(ILI9486_BCKL, GPIO_MODE_OUTPUT);
#endif
//Reset the display //Reset the display
gpio_set_level(ILI9486_RST, 0); gpio_set_level(ILI9486_RST, 0);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(ILI9486_RST, 1); gpio_set_level(ILI9486_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
#if ILI9486_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9486_BCKL);
gpio_set_direction(ILI9486_BCKL, GPIO_MODE_OUTPUT);
#endif
ESP_LOGI(TAG, "ILI9486 Initialization."); ESP_LOGI(TAG, "ILI9486 Initialization.");
@ -105,8 +98,6 @@ void ili9486_init(void)
cmd++; cmd++;
} }
ili9486_enable_backlight(true);
ili9486_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION); ili9486_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
} }
@ -139,22 +130,6 @@ void ili9486_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
ili9486_send_color((void*) color_map, size * 2); ili9486_send_color((void*) color_map, size * 2);
} }
void ili9486_enable_backlight(bool backlight)
{
#if ILI9486_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (ILI9486_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(ILI9486_BCKL, tmp);
#endif
}
/********************** /**********************
* STATIC FUNCTIONS * STATIC FUNCTIONS
**********************/ **********************/

View file

@ -27,15 +27,8 @@ extern "C" {
*********************/ *********************/
#define ILI9486_DC CONFIG_LV_DISP_PIN_DC #define ILI9486_DC CONFIG_LV_DISP_PIN_DC
#define ILI9486_RST CONFIG_LV_DISP_PIN_RST #define ILI9486_RST CONFIG_LV_DISP_PIN_RST
#define ILI9486_BCKL CONFIG_LV_DISP_PIN_BCKL #define ILI9486_USE_RST CONFIG_LV_DISP_USE_RST
#define ILI9486_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define ILI9486_BCKL_ACTIVE_LVL 1
#else
#define ILI9486_BCKL_ACTIVE_LVL 0
#endif
/********************** /**********************
* TYPEDEFS * TYPEDEFS
@ -47,7 +40,6 @@ extern "C" {
void ili9486_init(void); void ili9486_init(void);
void ili9486_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void ili9486_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void ili9486_enable_backlight(bool backlight);
/********************** /**********************
* MACROS * MACROS

View file

@ -78,19 +78,22 @@ void ili9488_init(void)
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(ILI9488_DC); gpio_reset_pin(ILI9488_DC);
gpio_set_direction(ILI9488_DC, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9488_DC, GPIO_MODE_OUTPUT);
#if ILI9488_USE_RST
gpio_reset_pin(ILI9488_RST); gpio_reset_pin(ILI9488_RST);
gpio_set_direction(ILI9488_RST, GPIO_MODE_OUTPUT); gpio_set_direction(ILI9488_RST, GPIO_MODE_OUTPUT);
#if ILI9488_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9488_BCKL);
gpio_set_direction(ILI9488_BCKL, GPIO_MODE_OUTPUT);
#endif
//Reset the display //Reset the display
gpio_set_level(ILI9488_RST, 0); gpio_set_level(ILI9488_RST, 0);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(ILI9488_RST, 1); gpio_set_level(ILI9488_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
#if ILI9488_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ILI9488_BCKL);
gpio_set_direction(ILI9488_BCKL, GPIO_MODE_OUTPUT);
#endif
ESP_LOGI(TAG, "ILI9488 initialization."); ESP_LOGI(TAG, "ILI9488 initialization.");
@ -109,8 +112,6 @@ void ili9488_init(void)
cmd++; cmd++;
} }
ili9488_enable_backlight(true);
ili9488_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION); ili9488_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
} }
@ -170,22 +171,6 @@ void ili9488_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
heap_caps_free(mybuf); heap_caps_free(mybuf);
} }
void ili9488_enable_backlight(bool backlight)
{
#if ILI9488_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (ILI9488_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(ILI9488_BCKL, tmp);
#endif
}
/********************** /**********************
* STATIC FUNCTIONS * STATIC FUNCTIONS
**********************/ **********************/

View file

@ -27,15 +27,7 @@ extern "C" {
*********************/ *********************/
#define ILI9488_DC CONFIG_LV_DISP_PIN_DC #define ILI9488_DC CONFIG_LV_DISP_PIN_DC
#define ILI9488_RST CONFIG_LV_DISP_PIN_RST #define ILI9488_RST CONFIG_LV_DISP_PIN_RST
#define ILI9488_BCKL CONFIG_LV_DISP_PIN_BCKL #define ILI9488_USE_RST CONFIG_LV_DISP_USE_RSTS
#define ILI9488_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define ILI9488_BCKL_ACTIVE_LVL 1
#else
#define ILI9488_BCKL_ACTIVE_LVL 0
#endif
/******************* /*******************
* ILI9488 REGS * ILI9488 REGS
@ -154,7 +146,6 @@ typedef struct {
void ili9488_init(void); void ili9488_init(void);
void ili9488_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void ili9488_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void ili9488_enable_backlight(bool backlight);
/********************** /**********************
* MACROS * MACROS

148
lvgl_tft/pcd8544.c Normal file
View file

@ -0,0 +1,148 @@
/**
* @file pcd8544.c
*
* Roughly based on:
* https://github.com/adafruit/Adafruit-PCD8544-Nokia-5110-LCD-library
* https://github.com/olikraus/u8g2
*/
#include "disp_spi.h"
#include "driver/gpio.h"
#include <esp_log.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "pcd8544.h"
#define TAG "lv_pcd8544"
/**********************
* MACROS
**********************/
#define BIT_SET(a,b) ((a) |= (1U<<(b)))
#define BIT_CLEAR(a,b) ((a) &= ~(1U<<(b)))
/**********************
* STATIC FUNCTIONS
**********************/
static void pcd8544_send_cmd(uint8_t cmd)
{
disp_wait_for_pending_transactions();
gpio_set_level(PCD8544_DC, 0); /*Command mode*/
disp_spi_send_data(&cmd, 1);
}
static void pcd8544_send_data(void * data, uint16_t length)
{
disp_wait_for_pending_transactions();
gpio_set_level(PCD8544_DC, 1); /*Data mode*/
disp_spi_send_data(data, length);
}
static void pcd8544_send_colors(void * data, uint16_t length)
{
gpio_set_level(PCD8544_DC, 1); /*Data mode*/
disp_spi_send_colors(data, length);
}
/**********************
* GLOBAL FUNCTIONS
**********************/
void pcd8544_init(void){
// TODO: orientation
// Initialize non-SPI GPIOs
gpio_reset_pin(PCD8544_DC);
gpio_set_direction(PCD8544_DC, GPIO_MODE_OUTPUT);
gpio_reset_pin(PCD8544_RST);
gpio_set_direction(PCD8544_RST, GPIO_MODE_OUTPUT);
// Reset the display
gpio_set_level(PCD8544_RST, 0);
vTaskDelay(100 / portTICK_RATE_MS);
gpio_set_level(PCD8544_RST, 1);
vTaskDelay(100 / portTICK_RATE_MS);
pcd8544_send_cmd(0x21); /* activate chip (PD=0), horizontal increment (V=0), enter extended command set (H=1) */
pcd8544_send_cmd(0x06); /* temp. control: b10 = 2 */
pcd8544_send_cmd(0x13); /* bias system 1:48 */
pcd8544_send_cmd(0xc0); /* medium Vop = Contrast 0x40 = 64 */
pcd8544_send_cmd(0x20); /* activate chip (PD=0), horizontal increment (V=0), enter extended command set (H=0) */
pcd8544_send_cmd(0x0c); /* display mode normal */
}
void pcd8544_set_contrast (uint8_t contrast){
if (contrast > 0x7f){
contrast = 0x7f;
}
pcd8544_send_cmd(0x21); /* activate chip (PD=0), horizontal increment (V=0), enter extended command set (H=1) */
pcd8544_send_cmd(0x80 | contrast); /* medium Vop = Contrast */
}
void pcd8544_rounder(lv_disp_drv_t * disp_drv, lv_area_t *area){
uint8_t hor_max = disp_drv->hor_res;
uint8_t ver_max = disp_drv->ver_res;
area->x1 = 0;
area->y1 = 0;
area->x2 = hor_max - 1;
area->y2 = ver_max - 1;
}
void pcd8544_set_px_cb(lv_disp_drv_t * disp_drv, uint8_t * buf, lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
lv_color_t color, lv_opa_t opa){
uint8_t set = (color.full == 0) && (LV_OPA_TRANSP != opa);
uint16_t byte_index = x + (( y>>3 ) * buf_w);
uint8_t bit_index = y & 0x7;
if (set) {
BIT_SET(buf[byte_index], bit_index);
} else {
BIT_CLEAR(buf[byte_index], bit_index);
}
}
void pcd8544_flush(lv_disp_drv_t * disp_drv, const lv_area_t * area, lv_color_t * color_map){
pcd8544_send_cmd(0x20); /* activate chip (PD=0), horizontal increment (V=0), enter extended command set (H=0) */
uint8_t * buf = (uint8_t *) color_map;
// Check if the whole frame buffer can be sent in a single SPI transaction
if ((area->x1 == 0) && (area->y1 == 0) && (area->x2 == (disp_drv->hor_res - 1)) && (area->y2 == (disp_drv->ver_res - 1))){
// send complete frame buffer at once.
// NOTE: disp_spi_send_colors triggers lv_disp_flush_ready
pcd8544_send_cmd(0x40); /* set Y address */
pcd8544_send_cmd(0x80); /* set X address */
pcd8544_send_colors(buf, disp_drv->hor_res * disp_drv->ver_res / 8);
} else {
// send horizontal tiles
uint16_t bank_start = area->y1 / 8;
uint16_t bank_end = area->y2 / 8;
uint16_t bank;
uint16_t cols_to_update = area->x2 - area->x1 + 1;
for (bank = bank_start ; bank <= bank_end ; bank++ ){
pcd8544_send_cmd(0x40 | bank ); /* set Y address */
pcd8544_send_cmd(0x80 | area->x1 ); /* set X address */
uint16_t offset = bank * disp_drv->hor_res + area->x1;
pcd8544_send_data(&buf[offset], cols_to_update);
}
lv_disp_flush_ready(disp_drv);
}
}

57
lvgl_tft/pcd8544.h Normal file
View file

@ -0,0 +1,57 @@
/**
* @file pcd8544.h
*
*/
#ifndef PCD8544_H
#define PCD8544_H
#ifdef __cplusplus
extern "C" {
#endif
/*********************
* INCLUDES
*********************/
#include <stdbool.h>
#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif
/*********************
* DEFINES
*********************/
#define PCD8544_DC CONFIG_LV_DISP_PIN_DC
#define PCD8544_RST CONFIG_LV_DISP_PIN_RST
#define PCD8544_BCKL CONFIG_LV_DISP_PIN_BCKL
/**********************
* TYPEDEFS
**********************/
/**********************
* GLOBAL PROTOTYPES
**********************/
void pcd8544_init(void);
void pcd8544_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void pcd8544_rounder(lv_disp_drv_t * disp_drv, lv_area_t *area);
void pcd8544_set_px_cb(lv_disp_drv_t * disp_drv, uint8_t * buf, lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
lv_color_t color, lv_opa_t opa);
void pcd8544_set_contrast(uint8_t contrast);
/**********************
* MACROS
**********************/
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif /*PCD8544_H*/

View file

@ -148,29 +148,23 @@ void ra8875_init(void)
ESP_LOGI(TAG, "Initializing RA8875..."); ESP_LOGI(TAG, "Initializing RA8875...");
#if (CONFIG_LV_DISP_PIN_BCKL == 15)
gpio_config_t io_conf;
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = GPIO_SEL_15;
io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
gpio_config(&io_conf);
#endif
// Initialize non-SPI GPIOs // Initialize non-SPI GPIOs
#if RA8875_USE_RST
gpio_reset_pin(RA8875_RST); gpio_reset_pin(RA8875_RST);
gpio_set_direction(RA8875_RST, GPIO_MODE_OUTPUT); gpio_set_direction(RA8875_RST, GPIO_MODE_OUTPUT);
#ifdef CONFIG_LV_DISP_PIN_BCKL
gpio_reset_pin(CONFIG_LV_DISP_PIN_BCKL);
gpio_set_direction(CONFIG_LV_DISP_PIN_BCKL, GPIO_MODE_OUTPUT);
#endif
// Reset the RA8875 // Reset the RA8875
gpio_set_level(RA8875_RST, 0); gpio_set_level(RA8875_RST, 0);
vTaskDelay(DIV_ROUND_UP(100, portTICK_PERIOD_MS)); vTaskDelay(DIV_ROUND_UP(100, portTICK_PERIOD_MS));
gpio_set_level(RA8875_RST, 1); gpio_set_level(RA8875_RST, 1);
vTaskDelay(DIV_ROUND_UP(100, portTICK_PERIOD_MS)); vTaskDelay(DIV_ROUND_UP(100, portTICK_PERIOD_MS));
#endif
#ifdef CONFIG_LV_DISP_PIN_BCKL
gpio_reset_pin(CONFIG_LV_DISP_PIN_BCKL);
gpio_set_direction(CONFIG_LV_DISP_PIN_BCKL, GPIO_MODE_OUTPUT);
#endif
// Initalize RA8875 clocks (SPI must be decelerated before initializing clocks) // Initalize RA8875 clocks (SPI must be decelerated before initializing clocks)
disp_spi_change_device_speed(SPI_CLOCK_SPEED_SLOW_HZ); disp_spi_change_device_speed(SPI_CLOCK_SPEED_SLOW_HZ);
@ -194,28 +188,8 @@ void ra8875_init(void)
ESP_LOGW(TAG, "WARNING: Memory clear timed out; RA8875 may be unresponsive."); ESP_LOGW(TAG, "WARNING: Memory clear timed out; RA8875 may be unresponsive.");
} }
// Enable the display and backlight // Enable the display
ra8875_enable_display(true); ra8875_enable_display(true);
ra8875_enable_backlight(true);
}
void ra8875_enable_backlight(bool backlight)
{
#if CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
#ifdef CONFIG_LV_DISP_PIN_BCKL
gpio_set_level(CONFIG_LV_DISP_PIN_BCKL, tmp);
#endif
#endif
} }
void ra8875_enable_display(bool enable) void ra8875_enable_display(bool enable)

View file

@ -25,6 +25,7 @@ extern "C" {
* DEFINES * DEFINES
*********************/ *********************/
#define RA8875_RST CONFIG_LV_DISP_PIN_RST #define RA8875_RST CONFIG_LV_DISP_PIN_RST
#define RA8875_USE_RST CONFIG_LV_DISP_USE_RST
// System & Configuration Registers // System & Configuration Registers
#define RA8875_REG_PWRR (0x01) // Power and Display Control Register (PWRR) #define RA8875_REG_PWRR (0x01) // Power and Display Control Register (PWRR)
@ -96,7 +97,6 @@ extern "C" {
**********************/ **********************/
void ra8875_init(void); void ra8875_init(void);
void ra8875_enable_backlight(bool backlight);
void ra8875_enable_display(bool enable); void ra8875_enable_display(bool enable);
void ra8875_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void ra8875_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);

View file

@ -94,6 +94,8 @@ void sh1107_init(void)
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(SH1107_DC); gpio_reset_pin(SH1107_DC);
gpio_set_direction(SH1107_DC, GPIO_MODE_OUTPUT); gpio_set_direction(SH1107_DC, GPIO_MODE_OUTPUT);
#if SH1107_USE_RST
gpio_reset_pin(SH1107_RST); gpio_reset_pin(SH1107_RST);
gpio_set_direction(SH1107_RST, GPIO_MODE_OUTPUT); gpio_set_direction(SH1107_RST, GPIO_MODE_OUTPUT);
@ -102,6 +104,7 @@ void sh1107_init(void)
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(SH1107_RST, 1); gpio_set_level(SH1107_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
//Send all the commands //Send all the commands
uint16_t cmd = 0; uint16_t cmd = 0;

View file

@ -27,6 +27,7 @@ extern "C" {
*********************/ *********************/
#define SH1107_DC CONFIG_LV_DISP_PIN_DC #define SH1107_DC CONFIG_LV_DISP_PIN_DC
#define SH1107_RST CONFIG_LV_DISP_PIN_RST #define SH1107_RST CONFIG_LV_DISP_PIN_RST
#define SH1107_USE_RST CONFIG_LV_DISP_USE_RST
/********************** /**********************
* TYPEDEFS * TYPEDEFS

View file

@ -13,10 +13,9 @@
/********************* /*********************
* INCLUDES * INCLUDES
*********************/ *********************/
#include "driver/i2c.h"
#include "assert.h" #include "assert.h"
#include "lvgl_i2c_conf.h" #include "lvgl_i2c/i2c_manager.h"
#include "ssd1306.h" #include "ssd1306.h"
@ -25,6 +24,7 @@
*********************/ *********************/
#define TAG "SSD1306" #define TAG "SSD1306"
#define OLED_I2C_PORT (CONFIG_LV_I2C_DISPLAY_PORT)
// SLA (0x3C) + WRITE_MODE (0x00) = 0x78 (0b01111000) // SLA (0x3C) + WRITE_MODE (0x00) = 0x78 (0b01111000)
#define OLED_I2C_ADDRESS 0x3C #define OLED_I2C_ADDRESS 0x3C
#define OLED_WIDTH 128 #define OLED_WIDTH 128
@ -70,8 +70,6 @@
// Charge Pump (pg.62) // Charge Pump (pg.62)
#define OLED_CMD_SET_CHARGE_PUMP 0x8D // follow with 0x14 #define OLED_CMD_SET_CHARGE_PUMP 0x8D // follow with 0x14
#define OLED_IIC_FREQ_HZ 400000 // I2C colock frequency
/********************** /**********************
* TYPEDEFS * TYPEDEFS
**********************/ **********************/
@ -126,8 +124,8 @@ void ssd1306_init(void)
orientation_1, orientation_1,
orientation_2, orientation_2,
OLED_CMD_SET_CONTRAST, OLED_CMD_SET_CONTRAST,
display_mode,
0xFF, 0xFF,
display_mode,
OLED_CMD_DISPLAY_ON OLED_CMD_DISPLAY_ON
}; };
@ -213,44 +211,15 @@ void ssd1306_sleep_out(void)
static uint8_t send_data(lv_disp_drv_t *disp_drv, void *bytes, size_t bytes_len) static uint8_t send_data(lv_disp_drv_t *disp_drv, void *bytes, size_t bytes_len)
{ {
(void) disp_drv; (void) disp_drv;
esp_err_t err;
uint8_t *data = (uint8_t *) bytes; uint8_t *data = (uint8_t *) bytes;
i2c_cmd_handle_t cmd = i2c_cmd_link_create(); return lvgl_i2c_write(OLED_I2C_PORT, OLED_I2C_ADDRESS, data[0], data + 1, bytes_len - 1 );
i2c_master_start(cmd);
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
for (size_t idx = 0; idx < bytes_len; idx++) {
i2c_master_write_byte(cmd, data[idx], true);
}
i2c_master_stop(cmd);
/* Send queued commands */
err = i2c_master_cmd_begin(DISP_I2C_PORT, cmd, 10 / portTICK_PERIOD_MS);
i2c_cmd_link_delete(cmd);
return ESP_OK == err ? 0 : 1;
} }
static uint8_t send_pixels(lv_disp_drv_t *disp_drv, void *color_buffer, size_t buffer_len) static uint8_t send_pixels(lv_disp_drv_t *disp_drv, void *color_buffer, size_t buffer_len)
{ {
(void) disp_drv; (void) disp_drv;
esp_err_t err;
i2c_cmd_handle_t cmd = i2c_cmd_link_create(); return lvgl_i2c_write(OLED_I2C_PORT, OLED_I2C_ADDRESS, OLED_CONTROL_BYTE_DATA_STREAM, color_buffer, buffer_len);
i2c_master_start(cmd);
i2c_master_write_byte(cmd, (OLED_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
i2c_master_write_byte(cmd, OLED_CONTROL_BYTE_DATA_STREAM, true);
i2c_master_write(cmd, (uint8_t *) color_buffer, buffer_len, true);
i2c_master_stop(cmd);
/* Send queued commands */
err = i2c_master_cmd_begin(DISP_I2C_PORT, cmd, 10 / portTICK_PERIOD_MS);
i2c_cmd_link_delete(cmd);
return ESP_OK == err ? 0 : 1;
} }

View file

@ -25,8 +25,6 @@ extern "C" {
/********************* /*********************
* DEFINES * DEFINES
*********************/ *********************/
#define SSD1306_SDA CONFIG_LV_DISP_PIN_SDA
#define SSD1306_SCL CONFIG_LV_DISP_PIN_SCL
#define SSD1306_DISPLAY_ORIENTATION TFT_ORIENTATION_LANDSCAPE #define SSD1306_DISPLAY_ORIENTATION TFT_ORIENTATION_LANDSCAPE
/********************** /**********************

View file

@ -8,12 +8,15 @@
*********************/ *********************/
#include "st7735s.h" #include "st7735s.h"
#include "disp_spi.h" #include "disp_spi.h"
#include "driver/i2c.h"
#include "driver/gpio.h" #include "driver/gpio.h"
#include "esp_log.h" #include "esp_log.h"
#include "freertos/FreeRTOS.h" #include "freertos/FreeRTOS.h"
#include "freertos/task.h" #include "freertos/task.h"
#ifdef CONFIG_LV_M5STICKC_HANDLE_AXP192
#include "lvgl_i2c/i2c_manager.h"
#endif
/********************* /*********************
* DEFINES * DEFINES
*********************/ *********************/
@ -38,7 +41,6 @@ static void st7735s_send_cmd(uint8_t cmd);
static void st7735s_send_data(void * data, uint16_t length); static void st7735s_send_data(void * data, uint16_t length);
static void st7735s_send_color(void * data, uint16_t length); static void st7735s_send_color(void * data, uint16_t length);
static void st7735s_set_orientation(uint8_t orientation); static void st7735s_set_orientation(uint8_t orientation);
static void i2c_master_init();
static void axp192_write_byte(uint8_t addr, uint8_t data); static void axp192_write_byte(uint8_t addr, uint8_t data);
static void axp192_init(); static void axp192_init();
static void axp192_sleep_in(); static void axp192_sleep_in();
@ -60,7 +62,6 @@ uint8_t st7735s_portrait_mode = 0;
void st7735s_init(void) void st7735s_init(void)
{ {
#ifdef CONFIG_LV_M5STICKC_HANDLE_AXP192 #ifdef CONFIG_LV_M5STICKC_HANDLE_AXP192
i2c_master_init();
axp192_init(); axp192_init();
#endif #endif
@ -99,6 +100,8 @@ void st7735s_init(void)
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(ST7735S_DC); gpio_reset_pin(ST7735S_DC);
gpio_set_direction(ST7735S_DC, GPIO_MODE_OUTPUT); gpio_set_direction(ST7735S_DC, GPIO_MODE_OUTPUT);
#if ST7735S_USE_RST
gpio_reset_pin(ST7735S_RST); gpio_reset_pin(ST7735S_RST);
gpio_set_direction(ST7735S_RST, GPIO_MODE_OUTPUT); gpio_set_direction(ST7735S_RST, GPIO_MODE_OUTPUT);
@ -107,6 +110,7 @@ void st7735s_init(void)
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(ST7735S_RST, 1); gpio_set_level(ST7735S_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
ESP_LOGI(TAG, "ST7735S initialization."); ESP_LOGI(TAG, "ST7735S initialization.");
@ -160,12 +164,16 @@ void st7735s_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
void st7735s_sleep_in() void st7735s_sleep_in()
{ {
st7735s_send_cmd(0x10); st7735s_send_cmd(0x10);
#ifdef CONFIG_LV_M5STICKC_HANDLE_AXP192
axp192_sleep_in(); axp192_sleep_in();
#endif
} }
void st7735s_sleep_out() void st7735s_sleep_out()
{ {
#ifdef CONFIG_LV_M5STICKC_HANDLE_AXP192
axp192_sleep_out(); axp192_sleep_out();
#endif
st7735s_send_cmd(0x11); st7735s_send_cmd(0x11);
} }
@ -215,40 +223,18 @@ static void st7735s_set_orientation(uint8_t orientation)
st7735s_send_data((void *) &data[orientation], 1); st7735s_send_data((void *) &data[orientation], 1);
} }
static void i2c_master_init() #ifdef CONFIG_LV_M5STICKC_HANDLE_AXP192
{
i2c_config_t i2c_config = {
.mode = I2C_MODE_MASTER,
.sda_io_num = AXP192_SDA,
.scl_io_num = AXP192_SCL,
.sda_pullup_en = GPIO_PULLUP_ENABLE,
.scl_pullup_en = GPIO_PULLUP_ENABLE,
.master.clk_speed = 400000
};
i2c_param_config(I2C_NUM_0, &i2c_config);
i2c_driver_install(I2C_NUM_0, I2C_MODE_MASTER, 0, 0, 0);
}
static void axp192_write_byte(uint8_t addr, uint8_t data) static void axp192_write_byte(uint8_t addr, uint8_t data)
{ {
esp_err_t ret; err = lvgl_i2c_write(CONFIG_LV_I2C_DISPLAY_PORT, AXP192_I2C_ADDRESS, addr, &data, 1);
i2c_cmd_handle_t cmd = i2c_cmd_link_create();
i2c_master_start(cmd);
i2c_master_write_byte(cmd, (AXP192_I2C_ADDRESS << 1) | I2C_MASTER_WRITE, true);
i2c_master_write_byte(cmd, addr, true);
i2c_master_write_byte(cmd, data, true);
i2c_master_stop(cmd);
ret = i2c_master_cmd_begin(I2C_NUM_0, cmd, 10/portTICK_PERIOD_MS);
if (ret != ESP_OK) { if (ret != ESP_OK) {
ESP_LOGE(TAG, "AXP192 send failed. code: 0x%.2X", ret); ESP_LOGE(TAG, "AXP192 send failed. code: 0x%.2X", ret);
} }
i2c_cmd_link_delete(cmd); }
}
static void axp192_init() static void axp192_init()
{ {
// information on how to init and use AXP192 ifor M5StickC taken from // information on how to init and use AXP192 ifor M5StickC taken from
// https://forum.m5stack.com/topic/1025/m5stickc-turn-off-screen-completely // https://forum.m5stack.com/topic/1025/m5stickc-turn-off-screen-completely
@ -256,14 +242,16 @@ static void axp192_init()
axp192_write_byte(0x28, 0xCC); // Enable LDO2&LDO3, LED&TFT 3.0V axp192_write_byte(0x28, 0xCC); // Enable LDO2&LDO3, LED&TFT 3.0V
axp192_sleep_out(); axp192_sleep_out();
ESP_LOGI(TAG, "AXP192 initialized, power enabled for LDO2 and LDO3"); ESP_LOGI(TAG, "AXP192 initialized, power enabled for LDO2 and LDO3");
} }
static void axp192_sleep_in() static void axp192_sleep_in()
{ {
axp192_write_byte(0x12, 0x4b); axp192_write_byte(0x12, 0x4b);
} }
static void axp192_sleep_out() static void axp192_sleep_out()
{ {
axp192_write_byte(0x12, 0x4d); axp192_write_byte(0x12, 0x4d);
} }
#endif

View file

@ -27,9 +27,7 @@ extern "C" {
#define ST7735S_DC CONFIG_LV_DISP_PIN_DC #define ST7735S_DC CONFIG_LV_DISP_PIN_DC
#define ST7735S_RST CONFIG_LV_DISP_PIN_RST #define ST7735S_RST CONFIG_LV_DISP_PIN_RST
#define ST7735S_USE_RST CONFIG_LV_DISP_USE_RST
#define AXP192_SDA CONFIG_LV_AXP192_PIN_SDA
#define AXP192_SCL CONFIG_LV_AXP192_PIN_SCL
#define ST7735S_INVERT_COLORS CONFIG_LV_INVERT_COLORS #define ST7735S_INVERT_COLORS CONFIG_LV_INVERT_COLORS
@ -133,7 +131,6 @@ extern "C" {
void st7735s_init(void); void st7735s_init(void);
void st7735s_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map); void st7735s_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map);
void st7735s_enable_backlight(bool backlight);
void st7735s_sleep_in(void); void st7735s_sleep_in(void);
void st7735s_sleep_out(void); void st7735s_sleep_out(void);

View file

@ -35,9 +35,7 @@ typedef struct {
**********************/ **********************/
static void st7789_set_orientation(uint8_t orientation); static void st7789_set_orientation(uint8_t orientation);
static void st7789_send_cmd(uint8_t cmd); static void st7789_send_color(void *data, size_t length);
static void st7789_send_data(void *data, uint16_t length);
static void st7789_send_color(void *data, uint16_t length);
/********************** /**********************
* STATIC VARIABLES * STATIC VARIABLES
@ -91,7 +89,7 @@ void st7789_init(void)
gpio_reset_pin(ST7789_DC); gpio_reset_pin(ST7789_DC);
gpio_set_direction(ST7789_DC, GPIO_MODE_OUTPUT); gpio_set_direction(ST7789_DC, GPIO_MODE_OUTPUT);
#if !defined(CONFIG_LV_DISP_ST7789_SOFT_RESET) #if !defined(ST7789_SOFT_RST)
gpio_reset_pin(ST7789_RST); gpio_reset_pin(ST7789_RST);
gpio_set_direction(ST7789_RST, GPIO_MODE_OUTPUT); gpio_set_direction(ST7789_RST, GPIO_MODE_OUTPUT);
#endif #endif
@ -102,7 +100,7 @@ void st7789_init(void)
#endif #endif
//Reset the display //Reset the display
#if !defined(CONFIG_LV_DISP_ST7789_SOFT_RESET) #if !defined(ST7789_SOFT_RST)
gpio_set_level(ST7789_RST, 0); gpio_set_level(ST7789_RST, 0);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(ST7789_RST, 1); gpio_set_level(ST7789_RST, 1);
@ -124,30 +122,12 @@ void st7789_init(void)
cmd++; cmd++;
} }
st7789_enable_backlight(true);
st7789_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION); st7789_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
} }
void st7789_enable_backlight(bool backlight) /* The ST7789 display controller can drive up to 320*240 displays, when using a 240*240 or 240*135
{ * displays there's a gap of 80px or 40/52/53px respectively. 52px or 53x offset depends on display orientation.
#if ST7789_ENABLE_BACKLIGHT_CONTROL * We need to edit the coordinates to take into account those gaps, this is not necessary in all orientations. */
printf("%s backlight.\n", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (ST7789_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(ST7789_BCKL, tmp);
#endif
}
/* The ST7789 display controller can drive 320*240 displays, when using a 240*240
* display there's a gap of 80px, we need to edit the coordinates to take into
* account that gap, this is not necessary in all orientations. */
void st7789_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map) void st7789_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map)
{ {
uint8_t data[4] = {0}; uint8_t data[4] = {0};
@ -164,13 +144,29 @@ void st7789_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
offsety2 += CONFIG_LV_TFT_DISPLAY_Y_OFFSET; offsety2 += CONFIG_LV_TFT_DISPLAY_Y_OFFSET;
#elif (LV_HOR_RES_MAX == 240) && (LV_VER_RES_MAX == 240) #elif (LV_HOR_RES_MAX == 240) && (LV_VER_RES_MAX == 240)
#if (CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT) #if (CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT)
offsetx1 += 80; offsetx1 += 80;
offsetx2 += 80; offsetx2 += 80;
#elif (CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED) #elif (CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED)
offsety1 += 80; offsety1 += 80;
offsety2 += 80; offsety2 += 80;
#endif #endif
#elif (LV_HOR_RES_MAX == 240) && (LV_VER_RES_MAX == 135)
#if (CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT) || \
(CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT_INVERTED)
offsetx1 += 40;
offsetx2 += 40;
offsety1 += 53;
offsety2 += 53;
#endif
#elif (LV_HOR_RES_MAX == 135) && (LV_VER_RES_MAX == 240)
#if (CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE) || \
(CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED)
offsetx1 += 52;
offsetx2 += 52;
offsety1 += 40;
offsety2 += 40;
#endif
#endif #endif
/*Column addresses*/ /*Column addresses*/
@ -192,7 +188,7 @@ void st7789_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
/*Memory write*/ /*Memory write*/
st7789_send_cmd(ST7789_RAMWR); st7789_send_cmd(ST7789_RAMWR);
uint32_t size = lv_area_get_width(area) * lv_area_get_height(area); size_t size = (size_t)lv_area_get_width(area) * (size_t)lv_area_get_height(area);
st7789_send_color((void*)color_map, size * 2); st7789_send_color((void*)color_map, size * 2);
@ -201,21 +197,21 @@ void st7789_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
/********************** /**********************
* STATIC FUNCTIONS * STATIC FUNCTIONS
**********************/ **********************/
static void st7789_send_cmd(uint8_t cmd) void st7789_send_cmd(uint8_t cmd)
{ {
disp_wait_for_pending_transactions(); disp_wait_for_pending_transactions();
gpio_set_level(ST7789_DC, 0); gpio_set_level(ST7789_DC, 0);
disp_spi_send_data(&cmd, 1); disp_spi_send_data(&cmd, 1);
} }
static void st7789_send_data(void * data, uint16_t length) void st7789_send_data(void * data, uint16_t length)
{ {
disp_wait_for_pending_transactions(); disp_wait_for_pending_transactions();
gpio_set_level(ST7789_DC, 1); gpio_set_level(ST7789_DC, 1);
disp_spi_send_data(data, length); disp_spi_send_data(data, length);
} }
static void st7789_send_color(void * data, uint16_t length) static void st7789_send_color(void * data, size_t length)
{ {
disp_wait_for_pending_transactions(); disp_wait_for_pending_transactions();
gpio_set_level(ST7789_DC, 1); gpio_set_level(ST7789_DC, 1);

View file

@ -23,17 +23,17 @@ extern "C"
#define ST7789_DC CONFIG_LV_DISP_PIN_DC #define ST7789_DC CONFIG_LV_DISP_PIN_DC
#define ST7789_RST CONFIG_LV_DISP_PIN_RST #define ST7789_RST CONFIG_LV_DISP_PIN_RST
#define ST7789_BCKL CONFIG_LV_DISP_PIN_BCKL
#define ST7789_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL #if CONFIG_LV_DISP_USE_RST
#define ST7789_INVERT_COLORS CONFIG_LV_INVERT_COLORS #if CONFIG_LV_DISP_ST7789_SOFT_RESET
#define ST7789_SOFT_RST
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL #endif
#define ST7789_BCKL_ACTIVE_LVL 1
#else #else
#define ST7789_BCKL_ACTIVE_LVL 0 #define ST7789_SOFT_RST
#endif #endif
#define ST7789_INVERT_COLORS CONFIG_LV_INVERT_COLORS
/* ST7789 commands */ /* ST7789 commands */
#define ST7789_NOP 0x00 #define ST7789_NOP 0x00
#define ST7789_SWRESET 0x01 #define ST7789_SWRESET 0x01
@ -112,7 +112,9 @@ extern "C"
void st7789_init(void); void st7789_init(void);
void st7789_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map); void st7789_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map);
void st7789_enable_backlight(bool backlight);
void st7789_send_cmd(uint8_t cmd);
void st7789_send_data(void *data, uint16_t length);
#ifdef __cplusplus #ifdef __cplusplus
} /* extern "C" */ } /* extern "C" */

View file

@ -81,31 +81,25 @@ void st7796s_init(void)
{0, {0}, 0xff}, {0, {0}, 0xff},
}; };
#if ST7796S_BCKL == 15
gpio_config_t io_conf;
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = GPIO_SEL_15;
io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
gpio_config(&io_conf);
#endif
//Initialize non-SPI GPIOs //Initialize non-SPI GPIOs
gpio_reset_pin(ST7796S_DC); gpio_reset_pin(ST7796S_DC);
gpio_set_direction(ST7796S_DC, GPIO_MODE_OUTPUT); gpio_set_direction(ST7796S_DC, GPIO_MODE_OUTPUT);
#if ST7796S_USE_RST
gpio_reset_pin(ST7796S_RST); gpio_reset_pin(ST7796S_RST);
gpio_set_direction(ST7796S_RST, GPIO_MODE_OUTPUT); gpio_set_direction(ST7796S_RST, GPIO_MODE_OUTPUT);
#if ST7796S_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ST7796S_BCKL);
gpio_set_direction(ST7796S_BCKL, GPIO_MODE_OUTPUT);
#endif
//Reset the display //Reset the display
gpio_set_level(ST7796S_RST, 0); gpio_set_level(ST7796S_RST, 0);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
gpio_set_level(ST7796S_RST, 1); gpio_set_level(ST7796S_RST, 1);
vTaskDelay(100 / portTICK_PERIOD_MS); vTaskDelay(100 / portTICK_PERIOD_MS);
#endif
#if ST7796S_ENABLE_BACKLIGHT_CONTROL
gpio_reset_pin(ST7796S_BCKL);
gpio_set_direction(ST7796S_BCKL, GPIO_MODE_OUTPUT);
#endif
ESP_LOGI(TAG, "Initialization."); ESP_LOGI(TAG, "Initialization.");
@ -122,8 +116,6 @@ void st7796s_init(void)
cmd++; cmd++;
} }
st7796s_enable_backlight(true);
st7796s_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION); st7796s_set_orientation(CONFIG_LV_DISPLAY_ORIENTATION);
#if ST7796S_INVERT_COLORS == 1 #if ST7796S_INVERT_COLORS == 1
@ -161,22 +153,6 @@ void st7796s_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_
st7796s_send_color((void *)color_map, size * 2); st7796s_send_color((void *)color_map, size * 2);
} }
void st7796s_enable_backlight(bool backlight)
{
#if ST7796S_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if (ST7796S_BCKL_ACTIVE_LVL == 1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
gpio_set_level(ST7796S_BCKL, tmp);
#endif
}
void st7796s_sleep_in() void st7796s_sleep_in()
{ {
uint8_t data[] = {0x08}; uint8_t data[] = {0x08};

View file

@ -28,17 +28,10 @@ extern "C"
*********************/ *********************/
#define ST7796S_DC CONFIG_LV_DISP_PIN_DC #define ST7796S_DC CONFIG_LV_DISP_PIN_DC
#define ST7796S_RST CONFIG_LV_DISP_PIN_RST #define ST7796S_RST CONFIG_LV_DISP_PIN_RST
#define ST7796S_BCKL CONFIG_LV_DISP_PIN_BCKL #define ST7796S_USE_RST CONFIG_LV_DISP_USE_RST
#define ST7796S_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#define ST7796S_INVERT_COLORS CONFIG_LV_INVERT_COLORS #define ST7796S_INVERT_COLORS CONFIG_LV_INVERT_COLORS
#define ST7796S_DISPLAY_ORIENTATION CONFIG_LV_DISPLAY_ORIENTATION #define ST7796S_DISPLAY_ORIENTATION CONFIG_LV_DISPLAY_ORIENTATION
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define ST7796S_BCKL_ACTIVE_LVL 1
#else
#define ST7796S_BCKL_ACTIVE_LVL 0
#endif
/******************* /*******************
* ST7796S REGS * ST7796S REGS
@ -118,7 +111,6 @@ extern "C"
void st7796s_init(void); void st7796s_init(void);
void st7796s_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map); void st7796s_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map);
void st7796s_enable_backlight(bool backlight);
/********************** /**********************
* MACROS * MACROS

View file

@ -9,6 +9,7 @@ menu "LVGL Touch controller"
default 4 if LV_TOUCH_CONTROLLER_ADCRAW default 4 if LV_TOUCH_CONTROLLER_ADCRAW
default 5 if LV_TOUCH_CONTROLLER_FT81X default 5 if LV_TOUCH_CONTROLLER_FT81X
default 6 if LV_TOUCH_CONTROLLER_RA8875 default 6 if LV_TOUCH_CONTROLLER_RA8875
default 7 if LV_TOUCH_CONTROLLER_GT911
choice choice
prompt "Select a touch panel controller model." prompt "Select a touch panel controller model."
@ -22,7 +23,7 @@ menu "LVGL Touch controller"
select LV_TOUCH_DRIVER_PROTOCOL_SPI select LV_TOUCH_DRIVER_PROTOCOL_SPI
bool "XPT2046" bool "XPT2046"
config LV_TOUCH_CONTROLLER_FT6X06 config LV_TOUCH_CONTROLLER_FT6X06
select LV_TOUCH_DRIVER_PROTOCOL_I2C select LV_I2C_TOUCH
bool "FT6X06" bool "FT6X06"
config LV_TOUCH_CONTROLLER_STMPE610 config LV_TOUCH_CONTROLLER_STMPE610
select LV_TOUCH_DRIVER_PROTOCOL_SPI select LV_TOUCH_DRIVER_PROTOCOL_SPI
@ -36,6 +37,9 @@ menu "LVGL Touch controller"
config LV_TOUCH_CONTROLLER_RA8875 config LV_TOUCH_CONTROLLER_RA8875
select LV_TOUCH_DRIVER_DISPLAY select LV_TOUCH_DRIVER_DISPLAY
bool "RA8875" bool "RA8875"
config LV_TOUCH_CONTROLLER_GT911
select LV_I2C_TOUCH
bool "GT911"
endchoice endchoice
config LV_TOUCH_DRIVER_PROTOCOL_SPI config LV_TOUCH_DRIVER_PROTOCOL_SPI
@ -43,7 +47,7 @@ menu "LVGL Touch controller"
help help
Touch controller protocol SPI Touch controller protocol SPI
config LV_TOUCH_DRIVER_PROTOCOL_I2C config LV_I2C_TOUCH
bool bool
help help
Touch controller protocol I2C Touch controller protocol I2C
@ -59,35 +63,18 @@ menu "LVGL Touch controller"
Touch controller uses same interface/device as display Touch controller uses same interface/device as display
(Note: Display must be initialized before touch) (Note: Display must be initialized before touch)
choice
prompt "Touch I2C port"
depends on LV_TOUCH_DRIVER_PROTOCOL_I2C
default LV_TOUCH_I2C_PORT_0
help
Select the I2C port used by the touch controller.
config LV_TOUCH_I2C_PORT_0
bool "I2C PORT 0"
config LV_TOUCH_I2C_PORT_1
bool "I2C PORT 1"
endchoice
choice choice
prompt "Touch Controller SPI Bus." prompt "Touch Controller SPI Bus."
depends on LV_TOUCH_DRIVER_PROTOCOL_SPI depends on LV_TOUCH_DRIVER_PROTOCOL_SPI
default LV_TOUCH_CONTROLLER_SPI_VSPI if !IDF_TARGET_ESP32S2 default LV_TOUCH_CONTROLLER_SPI2_HOST
default LV_TOUCH_CONTROLLER_SPI_FSPI if IDF_TARGET_ESP32S2
help help
Select the SPI Bus the TFT Display is attached to. Select the SPI Bus the touch controller is attached to.
config LV_TOUCH_CONTROLLER_SPI_HSPI config LV_TOUCH_CONTROLLER_SPI2_HOST
bool "HSPI" bool "SPI2_HOST"
config LV_TOUCH_CONTROLLER_SPI_VSPI config LV_TOUCH_CONTROLLER_SPI3_HOST
bool "VSPI" if !IDF_TARGET_ESP32S2 bool "SPI3_HOST"
config LV_TOUCH_CONTROLLER_SPI_FSPI
bool "FSPI" if IDF_TARGET_ESP32S2
endchoice endchoice
menu "Touchpanel (XPT2046) Pin Assignments" menu "Touchpanel (XPT2046) Pin Assignments"
@ -96,8 +83,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_MISO config LV_TOUCH_SPI_MISO
int int
prompt "GPIO for MISO (Master In Slave Out)" prompt "GPIO for MISO (Master In Slave Out)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 35 if LV_PREDEFINED_PINS_38V1 default 35 if LV_PREDEFINED_PINS_38V1
default 19 default 19
@ -107,8 +92,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_MOSI config LV_TOUCH_SPI_MOSI
int int
prompt "GPIO for MOSI (Master Out Slave In)" prompt "GPIO for MOSI (Master Out Slave In)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 32 if LV_PREDEFINED_PINS_38V1 default 32 if LV_PREDEFINED_PINS_38V1
default 23 default 23
@ -117,8 +100,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_CLK config LV_TOUCH_SPI_CLK
int "GPIO for CLK (SCK / Serial Clock)" int "GPIO for CLK (SCK / Serial Clock)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 26 if LV_PREDEFINED_PINS_38V1 default 26 if LV_PREDEFINED_PINS_38V1
default 18 default 18
@ -127,8 +108,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_CS config LV_TOUCH_SPI_CS
int "GPIO for CS (Slave Select)" int "GPIO for CS (Slave Select)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 33 if LV_PREDEFINED_PINS_38V1 default 33 if LV_PREDEFINED_PINS_38V1
default 5 default 5
@ -137,8 +116,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_PIN_IRQ config LV_TOUCH_PIN_IRQ
int "GPIO for IRQ (Interrupt Request)" int "GPIO for IRQ (Interrupt Request)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 27 if LV_PREDEFINED_PINS_38V4 default 27 if LV_PREDEFINED_PINS_38V4
default 25 default 25
@ -203,36 +180,13 @@ menu "LVGL Touch controller"
endchoice endchoice
endmenu endmenu
menu "Touchpanel (FT6X06) Pin Assignments"
depends on LV_TOUCH_CONTROLLER_FT6X06
config LV_TOUCH_I2C_SDA
int
prompt "GPIO for SDA (I2C)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 21
help
Configure the I2C touchpanel SDA pin here.
config LV_TOUCH_I2C_SCL
int "GPIO for clock signal SCL (I2C)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 22
help
Configure the I2C touchpanel SCL pin here.
endmenu
menu "Touchpanel Configuration (FT6X06)" menu "Touchpanel Configuration (FT6X06)"
depends on LV_TOUCH_CONTROLLER_FT6X06 depends on LV_TOUCH_CONTROLLER_FT6X06
config LV_FT6X36_SWAPXY config LV_FT6X36_SWAPXY
bool bool
prompt "Swap X with Y coordinate." prompt "Swap X with Y coordinate."
default y default n
config LV_FT6X36_INVERT_X config LV_FT6X36_INVERT_X
bool bool
@ -242,7 +196,14 @@ menu "LVGL Touch controller"
config LV_FT6X36_INVERT_Y config LV_FT6X36_INVERT_Y
bool bool
prompt "Invert Y coordinate value." prompt "Invert Y coordinate value."
default y default n
config LV_FT6X36_COORDINATES_QUEUE
bool
prompt "Send coordinates to FreeRTOS queue."
default n
help
Receive from the FreeRTOS queue using the handle 'ft6x36_touch_queue_handle'.
endmenu endmenu
@ -252,8 +213,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_MISO config LV_TOUCH_SPI_MISO
int int
prompt "GPIO for MISO (Master In Slave Out)" prompt "GPIO for MISO (Master In Slave Out)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 35 if LV_PREDEFINED_PINS_38V1 default 35 if LV_PREDEFINED_PINS_38V1
default 19 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING default 19 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING
@ -263,10 +222,9 @@ menu "LVGL Touch controller"
Configure the touchpanel MISO pin here. Configure the touchpanel MISO pin here.
config LV_TOUCH_SPI_MOSI config LV_TOUCH_SPI_MOSI
# TODO Fix default for ESP32C3
int int
prompt "GPIO for MOSI (Master Out Slave In)" prompt "GPIO for MOSI (Master Out Slave In)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 32 if LV_PREDEFINED_PINS_38V1 default 32 if LV_PREDEFINED_PINS_38V1
default 18 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING default 18 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING
@ -277,8 +235,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_CLK config LV_TOUCH_SPI_CLK
int "GPIO for CLK (SCK / Serial Clock)" int "GPIO for CLK (SCK / Serial Clock)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 26 if LV_PREDEFINED_PINS_38V1 default 26 if LV_PREDEFINED_PINS_38V1
default 5 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING default 5 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING
@ -288,9 +244,6 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_CS config LV_TOUCH_SPI_CS
int "GPIO for CS (Slave Select)" int "GPIO for CS (Slave Select)"
range 0 39 if IDF_TARGET_ESP32
range 0 43 if IDF_TARGET_ESP32S2
default 33 if LV_PREDEFINED_PINS_38V1 default 33 if LV_PREDEFINED_PINS_38V1
default 32 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING default 32 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING
default 5 default 5
@ -488,4 +441,57 @@ menu "LVGL Touch controller"
endmenu endmenu
menu "Touchpanel Configuration (GT911)"
depends on LV_TOUCH_CONTROLLER_GT911
config LV_GT911_SWAPXY
bool
prompt "Swap X with Y coordinate."
default y
config LV_GT911_INVERT_X
bool
prompt "Invert X coordinate value."
default n
config LV_GT911_INVERT_Y
bool
prompt "Invert Y coordinate value."
default y
endmenu
choice
prompt "Select an I2C port for the touch panel"
default LV_I2C_TOUCH_PORT_0
depends on LV_I2C_TOUCH
config LV_I2C_TOUCH_PORT_0
bool
prompt "I2C port 0"
help
I2C is shared peripheral managed by I2C Manager. In order to configure I2C Manager (pinout, etc.) see menu
Component config->I2C Port Settings.
config LV_I2C_TOUCH_PORT_1
bool
prompt "I2C port 1"
help
I2C is shared peripheral managed by I2C Manager. In order to configure I2C Manager (pinout, etc.) see menu
Component config->I2C Port Settings.
endchoice
config LV_I2C
bool
default y if LV_I2C_TOUCH
config LV_I2C_TOUCH_PORT
int
default 1 if LV_I2C_TOUCH_PORT_1
default 0
endmenu endmenu

View file

@ -19,37 +19,27 @@
*/ */
#include <esp_log.h> #include <esp_log.h>
#include <driver/i2c.h>
#ifdef LV_LVGL_H_INCLUDE_SIMPLE #ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include <lvgl.h> #include <lvgl.h>
#else #else
#include <lvgl/lvgl.h> #include <lvgl/lvgl.h>
#endif #endif
#include "ft6x36.h" #include "ft6x36.h"
#include "tp_i2c.h" #include "lvgl_i2c/i2c_manager.h"
#include "../lvgl_i2c_conf.h"
#define TAG "FT6X36" #define TAG "FT6X36"
#define FT6X36_TOUCH_QUEUE_ELEMENTS 1
ft6x36_status_t ft6x36_status; static ft6x36_status_t ft6x36_status;
uint8_t current_dev_addr; // set during init static uint8_t current_dev_addr; // set during init
static ft6x36_touch_t touch_inputs = { -1, -1, LV_INDEV_STATE_REL }; // -1 coordinates to designate it was never touched
#if CONFIG_LV_FT6X36_COORDINATES_QUEUE
QueueHandle_t ft6x36_touch_queue_handle;
#endif
esp_err_t ft6x06_i2c_read8(uint8_t slave_addr, uint8_t register_addr, uint8_t *data_buf) { static esp_err_t ft6x06_i2c_read8(uint8_t slave_addr, uint8_t register_addr, uint8_t *data_buf) {
i2c_cmd_handle_t i2c_cmd = i2c_cmd_link_create(); return lvgl_i2c_read(CONFIG_LV_I2C_TOUCH_PORT, slave_addr, register_addr, data_buf, 1);
i2c_master_start(i2c_cmd);
i2c_master_write_byte(i2c_cmd, (slave_addr << 1) | I2C_MASTER_WRITE, true);
i2c_master_write_byte(i2c_cmd, register_addr, I2C_MASTER_ACK);
i2c_master_start(i2c_cmd);
i2c_master_write_byte(i2c_cmd, (slave_addr << 1) | I2C_MASTER_READ, true);
i2c_master_read_byte(i2c_cmd, data_buf, I2C_MASTER_NACK);
i2c_master_stop(i2c_cmd);
esp_err_t ret = i2c_master_cmd_begin(TOUCH_I2C_PORT, i2c_cmd, 1000 / portTICK_PERIOD_MS);
i2c_cmd_link_delete(i2c_cmd);
return ret;
} }
/** /**
@ -75,19 +65,7 @@ uint8_t ft6x36_get_gesture_id() {
* @retval None * @retval None
*/ */
void ft6x06_init(uint16_t dev_addr) { void ft6x06_init(uint16_t dev_addr) {
if (!ft6x36_status.inited) {
/* I2C master is initialized before calling this function */
#if 0
esp_err_t code = i2c_master_init();
#else
esp_err_t code = ESP_OK;
#endif
if (code != ESP_OK) {
ft6x36_status.inited = false;
ESP_LOGE(TAG, "Error during I2C init %s", esp_err_to_name(code));
} else {
ft6x36_status.inited = true; ft6x36_status.inited = true;
current_dev_addr = dev_addr; current_dev_addr = dev_addr;
uint8_t data_buf; uint8_t data_buf;
@ -109,8 +87,16 @@ void ft6x06_init(uint16_t dev_addr) {
ft6x06_i2c_read8(dev_addr, FT6X36_RELEASECODE_REG, &data_buf); ft6x06_i2c_read8(dev_addr, FT6X36_RELEASECODE_REG, &data_buf);
ESP_LOGI(TAG, "\tRelease code: 0x%02x", data_buf); ESP_LOGI(TAG, "\tRelease code: 0x%02x", data_buf);
#if CONFIG_LV_FT6X36_COORDINATES_QUEUE
ft6x36_touch_queue_handle = xQueueCreate( FT6X36_TOUCH_QUEUE_ELEMENTS, sizeof( ft6x36_touch_t ) );
if( ft6x36_touch_queue_handle == NULL )
{
ESP_LOGE( TAG, "\tError creating touch input FreeRTOS queue" );
return;
} }
} xQueueSend( ft6x36_touch_queue_handle, &touch_inputs, 0 );
#endif
} }
/** /**
@ -120,82 +106,55 @@ void ft6x06_init(uint16_t dev_addr) {
* @retval Always false * @retval Always false
*/ */
bool ft6x36_read(lv_indev_drv_t *drv, lv_indev_data_t *data) { bool ft6x36_read(lv_indev_drv_t *drv, lv_indev_data_t *data) {
uint8_t data_xy[4]; // 2 bytes X | 2 bytes Y if (!ft6x36_status.inited) {
uint8_t touch_pnt_cnt; // Number of detected touch points ESP_LOGE(TAG, "Init first!");
static int16_t last_x = 0; // 12bit pixel value return 0x00;
static int16_t last_y = 0; // 12bit pixel value
ft6x06_i2c_read8(current_dev_addr, FT6X36_TD_STAT_REG, &touch_pnt_cnt);
if (touch_pnt_cnt != 1) { // ignore no touch & multi touch
data->point.x = last_x;
data->point.y = last_y;
data->state = LV_INDEV_STATE_REL;
return false;
} }
uint8_t data_buf[5]; // 1 byte status, 2 bytes X, 2 bytes Y
// Read X value esp_err_t ret = lvgl_i2c_read(CONFIG_LV_I2C_TOUCH_PORT, current_dev_addr, FT6X36_TD_STAT_REG, &data_buf[0], 5);
i2c_cmd_handle_t i2c_cmd = i2c_cmd_link_create();
i2c_master_start(i2c_cmd);
i2c_master_write_byte(i2c_cmd, (current_dev_addr << 1) | I2C_MASTER_WRITE, true);
i2c_master_write_byte(i2c_cmd, FT6X36_P1_XH_REG, I2C_MASTER_ACK);
i2c_master_start(i2c_cmd);
i2c_master_write_byte(i2c_cmd, (current_dev_addr << 1) | I2C_MASTER_READ, true);
i2c_master_read_byte(i2c_cmd, &data_xy[0], I2C_MASTER_ACK); // reads FT6X36_P1_XH_REG
i2c_master_read_byte(i2c_cmd, &data_xy[1], I2C_MASTER_NACK); // reads FT6X36_P1_XL_REG
i2c_master_stop(i2c_cmd);
esp_err_t ret = i2c_master_cmd_begin(TOUCH_I2C_PORT, i2c_cmd, 1000 / portTICK_PERIOD_MS);
i2c_cmd_link_delete(i2c_cmd);
if (ret != ESP_OK) { if (ret != ESP_OK) {
ESP_LOGE(TAG, "Error getting X coordinates: %s", esp_err_to_name(ret)); ESP_LOGE(TAG, "Error talking to touch IC: %s", esp_err_to_name(ret));
data->point.x = last_x; }
data->point.y = last_y; uint8_t touch_pnt_cnt = data_buf[0]; // Number of detected touch points
data->state = LV_INDEV_STATE_REL; // no touch detected
if (ret != ESP_OK || touch_pnt_cnt != 1) { // ignore no touch & multi touch
if ( touch_inputs.current_state != LV_INDEV_STATE_REL)
{
touch_inputs.current_state = LV_INDEV_STATE_REL;
#if CONFIG_LV_FT6X36_COORDINATES_QUEUE
xQueueOverwrite( ft6x36_touch_queue_handle, &touch_inputs );
#endif
}
data->point.x = touch_inputs.last_x;
data->point.y = touch_inputs.last_y;
data->state = touch_inputs.current_state;
return false; return false;
} }
// Read Y value touch_inputs.current_state = LV_INDEV_STATE_PR;
i2c_cmd = i2c_cmd_link_create(); touch_inputs.last_x = ((data_buf[1] & FT6X36_MSB_MASK) << 8) | (data_buf[2] & FT6X36_LSB_MASK);
touch_inputs.last_y = ((data_buf[3] & FT6X36_MSB_MASK) << 8) | (data_buf[4] & FT6X36_LSB_MASK);
i2c_master_start(i2c_cmd);
i2c_master_write_byte(i2c_cmd, (current_dev_addr << 1) | I2C_MASTER_WRITE, true);
i2c_master_write_byte(i2c_cmd, FT6X36_P1_YH_REG, I2C_MASTER_ACK);
i2c_master_start(i2c_cmd);
i2c_master_write_byte(i2c_cmd, (current_dev_addr << 1) | I2C_MASTER_READ, true);
i2c_master_read_byte(i2c_cmd, &data_xy[2], I2C_MASTER_ACK); // reads FT6X36_P1_YH_REG
i2c_master_read_byte(i2c_cmd, &data_xy[3], I2C_MASTER_NACK); // reads FT6X36_P1_YL_REG
i2c_master_stop(i2c_cmd);
ret = i2c_master_cmd_begin(TOUCH_I2C_PORT, i2c_cmd, 1000 / portTICK_PERIOD_MS);
i2c_cmd_link_delete(i2c_cmd);
if (ret != ESP_OK) {
ESP_LOGE(TAG, "Error getting Y coordinates: %s", esp_err_to_name(ret));
data->point.x = last_x;
data->point.y = last_y;
data->state = LV_INDEV_STATE_REL; // no touch detected
return false;
}
last_x = ((data_xy[0] & FT6X36_MSB_MASK) << 8) | (data_xy[1] & FT6X36_LSB_MASK);
last_y = ((data_xy[2] & FT6X36_MSB_MASK) << 8) | (data_xy[3] & FT6X36_LSB_MASK);
#if CONFIG_LV_FT6X36_SWAPXY #if CONFIG_LV_FT6X36_SWAPXY
int16_t swap_buf = last_x; int16_t swap_buf = touch_inputs.last_x;
last_x = last_y; touch_inputs.last_x = touch_inputs.last_y;
last_y = swap_buf; touch_inputs.last_y = swap_buf;
#endif #endif
#if CONFIG_LV_FT6X36_INVERT_X #if CONFIG_LV_FT6X36_INVERT_X
last_x = LV_HOR_RES - last_x; touch_inputs.last_x = LV_HOR_RES - touch_inputs.last_x;
#endif #endif
#if CONFIG_LV_FT6X36_INVERT_Y #if CONFIG_LV_FT6X36_INVERT_Y
last_y = LV_VER_RES - last_y; touch_inputs.last_y = LV_VER_RES - touch_inputs.last_y;
#endif #endif
data->point.x = last_x; data->point.x = touch_inputs.last_x;
data->point.y = last_y; data->point.y = touch_inputs.last_y;
data->state = LV_INDEV_STATE_PR; data->state = touch_inputs.current_state;
ESP_LOGV(TAG, "X=%u Y=%u", data->point.x, data->point.y); ESP_LOGD(TAG, "X=%u Y=%u", data->point.x, data->point.y);
#if CONFIG_LV_FT6X36_COORDINATES_QUEUE
xQueueOverwrite( ft6x36_touch_queue_handle, &touch_inputs );
#endif
return false; return false;
} }

View file

@ -23,6 +23,10 @@
#include <stdint.h> #include <stdint.h>
#include <stdbool.h> #include <stdbool.h>
#if CONFIG_LV_FT6X36_COORDINATES_QUEUE
#include "freertos/FreeRTOS.h"
#include "freertos/queue.h"
#endif
#ifdef LV_LVGL_H_INCLUDE_SIMPLE #ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h" #include "lvgl.h"
#else #else
@ -145,6 +149,16 @@ typedef struct {
bool inited; bool inited;
} ft6x36_status_t; } ft6x36_status_t;
typedef struct
{
int16_t last_x;
int16_t last_y;
lv_indev_state_t current_state;
} ft6x36_touch_t;
#if CONFIG_LV_FT6X36_COORDINATES_QUEUE
extern QueueHandle_t ft6x36_touch_queue_handle;
#endif
/** /**
* @brief Initialize for FT6x36 communication via I2C * @brief Initialize for FT6x36 communication via I2C
* @param dev_addr: Device address on communication Bus (I2C slave address of FT6X36). * @param dev_addr: Device address on communication Bus (I2C slave address of FT6X36).

144
lvgl_touch/gt911.c Normal file
View file

@ -0,0 +1,144 @@
/*
* Copyright © 2021 Sturnus Inc.
* Permission is hereby granted, free of charge, to any person obtaining a copy of this
* software and associated documentation files (the Software), to deal in the Software
* without restriction, including without limitation the rights to use, copy, modify, merge,
* publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
* to whom the Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
* PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
* FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <esp_log.h>
#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include <lvgl.h>
#else
#include <lvgl/lvgl.h>
#endif
#include "gt911.h"
#include "lvgl_i2c/i2c_manager.h"
#define TAG "GT911"
gt911_status_t gt911_status;
//TODO: handle multibyte read and refactor to just one read transaction
esp_err_t gt911_i2c_read(uint8_t slave_addr, uint16_t register_addr, uint8_t *data_buf, uint8_t len) {
return lvgl_i2c_read(CONFIG_LV_I2C_TOUCH_PORT, slave_addr, register_addr | I2C_REG_16, data_buf, len);
}
esp_err_t gt911_i2c_write8(uint8_t slave_addr, uint16_t register_addr, uint8_t data) {
uint8_t buffer = data;
return lvgl_i2c_write(CONFIG_LV_I2C_TOUCH_PORT, slave_addr, register_addr | I2C_REG_16, &buffer, 1);
}
/**
* @brief Initialize for GT911 communication via I2C
* @param dev_addr: Device address on communication Bus (I2C slave address of GT911).
* @retval None
*/
void gt911_init(uint8_t dev_addr) {
if (!gt911_status.inited) {
gt911_status.i2c_dev_addr = dev_addr;
uint8_t data_buf;
esp_err_t ret;
ESP_LOGI(TAG, "Checking for GT911 Touch Controller");
if ((ret = gt911_i2c_read(dev_addr, GT911_PRODUCT_ID1, &data_buf, 1) != ESP_OK)) {
ESP_LOGE(TAG, "Error reading from device: %s",
esp_err_to_name(ret)); // Only show error the first time
return;
}
// Read 4 bytes for Product ID in ASCII
for (int i = 0; i < GT911_PRODUCT_ID_LEN; i++) {
gt911_i2c_read(dev_addr, (GT911_PRODUCT_ID1 + i), (uint8_t *)&(gt911_status.product_id[i]), 1);
}
ESP_LOGI(TAG, "\tProduct ID: %s", gt911_status.product_id);
gt911_i2c_read(dev_addr, GT911_VENDOR_ID, &data_buf, 1);
ESP_LOGI(TAG, "\tVendor ID: 0x%02x", data_buf);
gt911_i2c_read(dev_addr, GT911_X_COORD_RES_L, &data_buf, 1);
gt911_status.max_x_coord = data_buf;
gt911_i2c_read(dev_addr, GT911_X_COORD_RES_H, &data_buf, 1);
gt911_status.max_x_coord |= ((uint16_t)data_buf << 8);
ESP_LOGI(TAG, "\tX Resolution: %d", gt911_status.max_x_coord);
gt911_i2c_read(dev_addr, GT911_Y_COORD_RES_L, &data_buf, 1);
gt911_status.max_y_coord = data_buf;
gt911_i2c_read(dev_addr, GT911_Y_COORD_RES_H, &data_buf, 1);
gt911_status.max_y_coord |= ((uint16_t)data_buf << 8);
ESP_LOGI(TAG, "\tY Resolution: %d", gt911_status.max_y_coord);
gt911_status.inited = true;
}
}
/**
* @brief Get the touch screen X and Y positions values. Ignores multi touch
* @param drv:
* @param data: Store data here
* @retval Always false
*/
bool gt911_read(lv_indev_drv_t *drv, lv_indev_data_t *data) {
uint8_t touch_pnt_cnt; // Number of detected touch points
static int16_t last_x = 0; // 12bit pixel value
static int16_t last_y = 0; // 12bit pixel value
uint8_t data_buf;
uint8_t status_reg;
gt911_i2c_read(gt911_status.i2c_dev_addr, GT911_STATUS_REG, &status_reg, 1);
// ESP_LOGI(TAG, "\tstatus: 0x%02x", status_reg);
touch_pnt_cnt = status_reg & 0x0F;
if ((status_reg & 0x80) || (touch_pnt_cnt < 6)) {
//Reset Status Reg Value
gt911_i2c_write8(gt911_status.i2c_dev_addr, GT911_STATUS_REG, 0x00);
}
if (touch_pnt_cnt != 1) { // ignore no touch & multi touch
data->point.x = last_x;
data->point.y = last_y;
data->state = LV_INDEV_STATE_REL;
return false;
}
// gt911_i2c_read(gt911_status.i2c_dev_addr, GT911_TRACK_ID1, &data_buf, 1);
// ESP_LOGI(TAG, "\ttrack_id: %d", data_buf);
gt911_i2c_read(gt911_status.i2c_dev_addr, GT911_PT1_X_COORD_L, &data_buf, 1);
last_x = data_buf;
gt911_i2c_read(gt911_status.i2c_dev_addr, GT911_PT1_X_COORD_H, &data_buf, 1);
last_x |= ((uint16_t)data_buf << 8);
gt911_i2c_read(gt911_status.i2c_dev_addr, GT911_PT1_Y_COORD_L, &data_buf, 1);
last_y = data_buf;
gt911_i2c_read(gt911_status.i2c_dev_addr, GT911_PT1_Y_COORD_H, &data_buf, 1);
last_y |= ((uint16_t)data_buf << 8);
#if CONFIG_LV_GT911_INVERT_X
last_x = gt911_status.max_x_coord - last_x;
#endif
#if CONFIG_LV_GT911_INVERT_Y
last_y = gt911_status.max_y_coord - last_y;
#endif
#if CONFIG_LV_GT911_SWAPXY
int16_t swap_buf = last_x;
last_x = last_y;
last_y = swap_buf;
#endif
data->point.x = last_x;
data->point.y = last_y;
data->state = LV_INDEV_STATE_PR;
ESP_LOGI(TAG, "X=%u Y=%u", data->point.x, data->point.y);
ESP_LOGV(TAG, "X=%u Y=%u", data->point.x, data->point.y);
return false;
}

94
lvgl_touch/gt911.h Normal file
View file

@ -0,0 +1,94 @@
#ifndef __GT911_H
/*
* Copyright © 2021 Sturnus Inc.
* Permission is hereby granted, free of charge, to any person obtaining a copy of this
* software and associated documentation files (the Software), to deal in the Software
* without restriction, including without limitation the rights to use, copy, modify, merge,
* publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
* to whom the Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
* PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
* FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#define __GT911_H
#include <stdint.h>
#include <stdbool.h>
#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
#define GT911_I2C_SLAVE_ADDR 0x5D
#define GT911_PRODUCT_ID_LEN 4
/* Register Map of GT911 */
#define GT911_PRODUCT_ID1 0x8140
#define GT911_PRODUCT_ID2 0x8141
#define GT911_PRODUCT_ID3 0x8142
#define GT911_PRODUCT_ID4 0x8143
#define GT911_FIRMWARE_VER_L 0x8144
#define GT911_FIRMWARE_VER_H 0x8145
#define GT911_X_COORD_RES_L 0x8146
#define GT911_X_COORD_RES_H 0x8147
#define GT911_Y_COORD_RES_L 0x8148
#define GT911_Y_COORD_RES_H 0x8149
#define GT911_VENDOR_ID 0x814A
#define GT911_STATUS_REG 0x814E
#define GT911_STATUS_REG_BUF 0x80
#define GT911_STATUS_REG_LARGE 0x40
#define GT911_STATUS_REG_PROX_VALID 0x20
#define GT911_STATUS_REG_HAVEKEY 0x10
#define GT911_STATUS_REG_PT_MASK 0x0F
#define GT911_TRACK_ID1 0x814F
#define GT911_PT1_X_COORD_L 0x8150
#define GT911_PT1_X_COORD_H 0x8151
#define GT911_PT1_Y_COORD_L 0x8152
#define GT911_PT1_Y_COORD_H 0x8153
#define GT911_PT1_X_SIZE_L 0x8154
#define GT911_PT1_X_SIZE_H 0x8155
typedef struct {
bool inited;
char product_id[GT911_PRODUCT_ID_LEN];
uint16_t max_x_coord;
uint16_t max_y_coord;
uint8_t i2c_dev_addr;
} gt911_status_t;
/**
* @brief Initialize for GT911 communication via I2C
* @param dev_addr: Device address on communication Bus (I2C slave address of GT911).
* @retval None
*/
void gt911_init(uint8_t dev_addr);
/**
* @brief Get the touch screen X and Y positions values. Ignores multi touch
* @param drv:
* @param data: Store data here
* @retval Always false
*/
bool gt911_read(lv_indev_drv_t *drv, lv_indev_data_t *data);
#ifdef __cplusplus
}
#endif
#endif /* __GT911_H */

View file

@ -4,7 +4,6 @@
#include "touch_driver.h" #include "touch_driver.h"
#include "tp_spi.h" #include "tp_spi.h"
#include "tp_i2c.h"
void touch_driver_init(void) void touch_driver_init(void)
@ -21,10 +20,16 @@ void touch_driver_init(void)
/* nothing to do */ /* nothing to do */
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_RA8875) #elif defined (CONFIG_LV_TOUCH_CONTROLLER_RA8875)
ra8875_touch_init(); ra8875_touch_init();
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_GT911)
gt911_init(GT911_I2C_SLAVE_ADDR);
#endif #endif
} }
#if LVGL_VERSION_MAJOR >= 8
void touch_driver_read(lv_indev_drv_t *drv, lv_indev_data_t *data)
#else
bool touch_driver_read(lv_indev_drv_t *drv, lv_indev_data_t *data) bool touch_driver_read(lv_indev_drv_t *drv, lv_indev_data_t *data)
#endif
{ {
bool res = false; bool res = false;
@ -40,8 +45,14 @@ bool touch_driver_read(lv_indev_drv_t *drv, lv_indev_data_t *data)
res = FT81x_read(drv, data); res = FT81x_read(drv, data);
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_RA8875) #elif defined (CONFIG_LV_TOUCH_CONTROLLER_RA8875)
res = ra8875_touch_read(drv, data); res = ra8875_touch_read(drv, data);
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_GT911)
res = gt911_read(drv, data);
#endif #endif
#if LVGL_VERSION_MAJOR >= 8
data->continue_reading = res;
#else
return res; return res;
#endif
} }

View file

@ -32,6 +32,8 @@ extern "C" {
#include "FT81x.h" #include "FT81x.h"
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_RA8875) #elif defined (CONFIG_LV_TOUCH_CONTROLLER_RA8875)
#include "ra8875_touch.h" #include "ra8875_touch.h"
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_GT911)
#include "gt911.h"
#endif #endif
/********************* /*********************
@ -42,7 +44,12 @@ extern "C" {
* GLOBAL PROTOTYPES * GLOBAL PROTOTYPES
**********************/ **********************/
void touch_driver_init(void); void touch_driver_init(void);
#if LVGL_VERSION_MAJOR >= 8
void touch_driver_read(lv_indev_drv_t *drv, lv_indev_data_t *data);
#else
bool touch_driver_read(lv_indev_drv_t *drv, lv_indev_data_t *data); bool touch_driver_read(lv_indev_drv_t *drv, lv_indev_data_t *data);
#endif
#ifdef __cplusplus #ifdef __cplusplus
} /* extern "C" */ } /* extern "C" */

View file

@ -1,43 +0,0 @@
/*
* Copyright © 2020 Wolfgang Christl
* Permission is hereby granted, free of charge, to any person obtaining a copy of this
* software and associated documentation files (the Software), to deal in the Software
* without restriction, including without limitation the rights to use, copy, modify, merge,
* publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
* to whom the Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
* PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
* FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <driver/i2c.h>
#include <esp_log.h>
#define I2C_MASTER_FREQ_HZ 100000 /* 100kHz*/
#define I2C_MASTER_TX_BUF_DISABLE 0 /* I2C master doesn't need buffer */
#define I2C_MASTER_RX_BUF_DISABLE 0 /* I2C master doesn't need buffer */
/**
* @brief ESP32 I2C init as master
* @ret ESP32 error code
*/
esp_err_t i2c_master_init(void) {
int i2c_master_port = I2C_NUM_0;
i2c_config_t conf;
conf.mode = I2C_MODE_MASTER;
conf.sda_io_num = CONFIG_LV_TOUCH_I2C_SDA;
conf.sda_pullup_en = GPIO_PULLUP_ENABLE;
conf.scl_io_num = CONFIG_LV_TOUCH_I2C_SCL;
conf.scl_pullup_en = GPIO_PULLUP_ENABLE;
conf.master.clk_speed = I2C_MASTER_FREQ_HZ;
i2c_param_config(i2c_master_port, &conf);
return i2c_driver_install(i2c_master_port, conf.mode, I2C_MASTER_RX_BUF_DISABLE, I2C_MASTER_TX_BUF_DISABLE, 0);
}

View file

@ -1,36 +0,0 @@
/*
* Copyright © 2020 Wolfgang Christl
* Permission is hereby granted, free of charge, to any person obtaining a copy of this
* software and associated documentation files (the Software), to deal in the Software
* without restriction, including without limitation the rights to use, copy, modify, merge,
* publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons
* to whom the Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
* INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
* PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
* FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef __TS_H
#define __TS_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
esp_err_t i2c_master_init(void);
#ifdef __cplusplus
}
#endif
#endif /* __TS_H */