Add support for commands with bigger width

lv_port/lv_port_display_espressif.c

@@ -66,48 +66,53 @@ bool display_port_gpio_is_busy(lv_disp_drv_t *drv)
     return device_busy;
 }
 
-void display_interface_send_cmd(lv_disp_drv_t *drv, uint8_t cmd, void *args, size_t args_len)
+void display_interface_send_cmd(lv_disp_drv_t *drv, uint32_t cmd, cmd_width_t cmd_width, void *args, size_t args_len)
 {
     (void) drv;
 
 #if defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI)
     disp_wait_for_pending_transactions();
     display_port_gpio_dc(drv, LV_DISPLAY_DC_CMD_MODE);
-    disp_spi_send_data(&cmd, 1);
+
+    if (CMD_WIDTH_8BITS == cmd_width) {
+        disp_spi_send_data(&cmd, 1);
+    }
+    else if (CMD_WIDTH_16BITS == cmd_width) {
+        /* Send 16bits cmd */
+    }
+    else {
+        /* Unsupported cmd size */
+    }
 
     if (args != NULL) {
         display_port_gpio_dc(drv, LV_DISPLAY_DC_DATA_MODE);
         disp_spi_send_data(args, args_len);
     }
 #elif defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_I2C)
-    (void) drv;
     uint8_t *data = (uint8_t *) args;
+    
     lvgl_i2c_write(OLED_I2C_PORT, OLED_I2C_ADDRESS, cmd, data, args_len); 
 #endif
 }
 
-void display_interface_send_data_async(lv_disp_drv_t *drv, void *data, size_t len)
+void display_interface_send_data(lv_disp_drv_t *drv, void *data, size_t len, data_xfer_mode_t mode)
 {
+    (void) drv;
+
 #if defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI)
     disp_wait_for_pending_transactions();
     display_port_gpio_dc(drv, LV_DISPLAY_DC_DATA_MODE);
     
-    disp_spi_send_colors(data, len);
+    if (DATA_XFER_MODE_ASYNC == mode) {
+        disp_spi_send_colors(data, len);
+    }
+    else if (DATA_XFER_MODE_SYNC == mode) {
+        /* Send data in polling mode and call lv_disp_flush after that */
+    }
+    else {
+
+    }
 #elif defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_I2C)
-    (void) drv;
-    lvgl_i2c_write(OLED_I2C_PORT, OLED_I2C_ADDRESS, OLED_CONTROL_BYTE_DATA_STREAM, data, len);
-#endif
-}
-
-void display_interface_send_data(lv_disp_drv_t *drv, void *data, size_t len)
-{
-#if defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_SPI)
-    disp_wait_for_pending_transactions();
-    display_port_gpio_dc(drv, LV_DISPLAY_DC_DATA_MODE);
-    
-    disp_spi_send_colors(data, len);
-#elif defined (CONFIG_LV_TFT_DISPLAY_PROTOCOL_I2C)
-    (void) drv;
     lvgl_i2c_write(OLED_I2C_PORT, OLED_I2C_ADDRESS, OLED_CONTROL_BYTE_DATA_STREAM, data, len);
 #endif
 }

lvgl_tft/display_port.h

@@ -15,6 +15,17 @@ extern "C"
 #include <stdint.h>
 #include <stdbool.h>
 
+typedef enum {
+    CMD_WIDTH_8BITS,
+    CMD_WIDTH_16BITS,
+    CMD_WIDTH_INVALID,
+} cmd_width_t;
+
+typedef enum {
+    DATA_XFER_MODE_SYNC,
+    DATA_XFER_MODE_ASYNC,
+} data_xfer_mode_t;
+
 /**
  * Busy wait delay port
  *
@@ -56,9 +67,27 @@ void display_port_gpio_rst(lv_disp_drv_t *drv, uint8_t state);
  */
 bool display_port_gpio_is_busy(lv_disp_drv_t *drv);
 
-void display_interface_send_cmd(lv_disp_drv_t *drv, uint8_t cmd, void *args, size_t args_len);
+/**
-void display_interface_send_data(lv_disp_drv_t *drv, void *data, size_t len);
+ * Send cmd to display
-void display_interface_send_data_async(lv_disp_drv_t *drv, void *data, size_t len);
+ * 
+ * @param drv Pointer to driver
+ * @param cmd Command to send
+ * @param cmd_width Width of the command (in bits) to be sent, see @ref cmd_width_t
+ * @param args Pointer to arguments, use NULL to send command without arguments
+ * @param args_len Arguments length (in bytes) to be sent
+ */
+void display_interface_send_cmd(lv_disp_drv_t *drv, uint32_t cmd, cmd_width_t cmd_width, void *args, size_t args_len);
+
+/**
+ * Send (image) data to display
+ *
+ * @param drv Pointer to driver
+ * @param data Pointer to data to be sent
+ * @param len Data length (in bytes) to be sent
+ * @param mode Data transfer mode, sync (polling) and async, lv_disp_flush must
+ *             be called when finishing the data transfer
+ */
+void display_interface_send_data(lv_disp_drv_t *drv, void *data, size_t len, data_xfer_mode_t mode);
 
 #ifdef __cplusplus
 } /* extern "C" */

lvgl_tft/ili9341.c

@@ -92,7 +92,7 @@ void ili9341_init(lv_disp_drv_t * drv)
         void *args = ili_init_cmds[idx].data;
         size_t args_len = ili_init_cmds[idx].databytes & 0x1F;
 
-        display_interface_send_cmd(drv, cmd, args, args_len);
+        display_interface_send_cmd(drv, cmd, CMD_WIDTH_8BITS, args, args_len);
         
         if (ili_init_cmds[idx].databytes & 0x80) {
             display_port_delay(drv, 100);
@@ -104,9 +104,9 @@ void ili9341_init(lv_disp_drv_t * drv)
     ili9341_set_orientation(drv, ILI9341_INITIAL_ORIENTATION);
 
 #if ILI9341_INVERT_COLORS == 1U
-    display_interface_send_cmd(drv, 0x21, NULL, 0);
+    display_interface_send_cmd(drv, 0x21, CMD_WIDTH_8BITS, NULL, 0);
 #else
-    display_interface_send_cmd(drv, 0x20, NULL, 0);
+    display_interface_send_cmd(drv, 0x20, CMD_WIDTH_8BITS, NULL, 0);
 #endif
 }
 
@@ -122,7 +122,7 @@ void ili9341_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
     data[2] = (area->x2 >> 8) & 0xFF;
     data[3] = area->x2 & 0xFF;
     
-    display_interface_send_cmd(drv, 0x2A, data, sizeof(data));
+    display_interface_send_cmd(drv, 0x2A, CMD_WIDTH_8BITS, data, sizeof(data));
 
     /* Page addresses */
     data[0] = (area->y1 >> 8) & 0xFF;
@@ -130,23 +130,23 @@ void ili9341_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
     data[2] = (area->y2 >> 8) & 0xFF;
     data[3] = area->y2 & 0xFF;
     
-    display_interface_send_cmd(drv, 0x2B, data, sizeof(data));
+    display_interface_send_cmd(drv, 0x2B, CMD_WIDTH_8BITS, data, sizeof(data));
 
     /* Memory write */
-    display_interface_send_cmd(drv, 0x2C, NULL, 0);
+    display_interface_send_cmd(drv, 0x2C, CMD_WIDTH_8BITS, NULL, 0);
-    display_interface_send_data_async(drv, color_map, size * 2);
+    display_interface_send_data(drv, color_map, size * 2, DATA_XFER_MODE_ASYNC);
 }
 
 void ili9341_sleep_in(lv_disp_drv_t * drv)
 {
     uint8_t data[] = {0x08};
-    display_interface_send_cmd(drv, 0x10, data, 1);
+    display_interface_send_cmd(drv, 0x10, CMD_WIDTH_8BITS, data, 1);
 }
 
 void ili9341_sleep_out(lv_disp_drv_t * drv)
 {
     uint8_t data[] = {0x08};
-    display_interface_send_cmd(drv, 0x11, data, 1);
+    display_interface_send_cmd(drv, 0x11, CMD_WIDTH_8BITS, data, 1);
 }
 
 /**********************
@@ -166,7 +166,7 @@ static void ili9341_set_orientation(lv_disp_drv_t *drv, uint8_t orientation)
     const uint8_t data[] = {0x48, 0x88, 0x28, 0xE8};
 #endif
 
-    display_interface_send_cmd(drv, MEMORY_ACCESS_CONTROL_REG, &data[orientation], 1);
+    display_interface_send_cmd(drv, MEMORY_ACCESS_CONTROL_REG, CMD_WIDTH_8BITS, &data[orientation], 1);
 }
 
 /* Reset the display, if we don't have a reset pin we use software reset */
@@ -178,7 +178,7 @@ static void ili9341_reset(lv_disp_drv_t *drv)
     display_port_gpio_rst(drv, 1);
     display_port_delay(drv, 100);
 #else
-    display_interface_send_cmd(drv, SOFTWARE_RESET_REG, NULL, 0);
+    display_interface_send_cmd(drv, SOFTWARE_RESET_REG, CMD_WIDTH_8BITS, NULL, 0);
     display_port_delay(drv, 5);
 #endif
 }