lvgl_esp32_drivers/lvgl_tft/st7796s.h

132 lines
3.7 KiB
C
Raw Normal View History

2020-12-24 17:36:37 +00:00
/**
* @file st7796s.h
*/
#ifndef ST7796S_H
#define ST7796S_H
#ifdef __cplusplus
extern "C"
{
#endif
/*********************
* INCLUDES
*********************/
#include <stdbool.h>
#include <stdint.h>
#ifdef LV_LVGL_H_INCLUDE_SIMPLE
#include "lvgl.h"
#else
#include "lvgl/lvgl.h"
#endif
#include "../lvgl_helpers.h"
/*********************
* DEFINES
*********************/
2023-08-24 10:45:30 +00:00
#define ST7796S_DC CONFIG_LV_DISP_PIN_DC
#define ST7796S_RST CONFIG_LV_DISP_PIN_RST
#define ST7796S_BCKL CONFIG_LV_DISP_PIN_BCKL
#define ST7796S_ENABLE_BACKLIGHT_CONTROL CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
#define ST7796S_INVERT_COLORS CONFIG_LV_INVERT_COLORS
2020-12-24 17:36:37 +00:00
#define ST7796S_DISPLAY_ORIENTATION CONFIG_LV_DISPLAY_ORIENTATION
2023-08-24 10:45:30 +00:00
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
#define ST7796S_BCKL_ACTIVE_LVL 1
#else
#define ST7796S_BCKL_ACTIVE_LVL 0
#endif
2020-12-24 17:36:37 +00:00
/*******************
* ST7796S REGS
*********************/
/* MIPI DCS Type1 */
#define ST7796S_CMD_NOP 0x00
#define ST7796S_CMD_SOFTWARE_RESET 0x01
#define ST7796S_CMD_READ_DISP_POWER_MODE 0x0A
#define ST7796S_CMD_READ_DISP_MADCTRL 0x0B // bits 7:3 only
#define ST7796S_CMD_READ_DISP_PIXEL_FORMAT 0x0C
#define ST7796S_CMD_READ_DISP_IMAGE_MODE 0x0D
#define ST7796S_CMD_READ_DISP_SIGNAL_MODE 0x0E
#define ST7796S_CMD_READ_DISP_SELF_DIAGNOSTIC 0x0F // bits 7:6 only
#define ST7796S_CMD_ENTER_SLEEP_MODE 0x10
#define ST7796S_CMD_SLEEP_OUT 0x11
#define ST7796S_CMD_PARTIAL_MODE_ON 0x12
#define ST7796S_CMD_NORMAL_DISP_MODE_ON 0x13
#define ST7796S_CMD_DISP_INVERSION_OFF 0x20
#define ST7796S_CMD_DISP_INVERSION_ON 0x21
#define ST7796S_CMD_DISPLAY_OFF 0x28
#define ST7796S_CMD_DISPLAY_ON 0x29
#define ST7796S_CMD_COLUMN_ADDRESS_SET 0x2A
#define ST7796S_CMD_PAGE_ADDRESS_SET 0x2B
#define ST7796S_CMD_MEMORY_WRITE 0x2C
#define ST7796S_CMD_MEMORY_READ 0x2E
#define ST7796S_CMD_PARTIAL_AREA 0x30
#define ST7796S_CMD_VERT_SCROLL_DEFINITION 0x33
#define ST7796S_CMD_TEARING_EFFECT_LINE_OFF 0x34
#define ST7796S_CMD_TEARING_EFFECT_LINE_ON 0x35
#define ST7796S_CMD_MEMORY_ACCESS_CONTROL 0x36 // bits 7:3,1:0 only
#define ST7796S_CMD_VERT_SCROLL_START_ADDRESS 0x37
#define ST7796S_CMD_IDLE_MODE_OFF 0x38
#define ST7796S_CMD_IDLE_MODE_ON 0x39
#define ST7796S_CMD_COLMOD_PIXEL_FORMAT_SET 0x3A
#define ST7796S_CMD_WRITE_MEMORY_CONTINUE 0x3C
#define ST7796S_CMD_READ_MEMORY_CONTINUE 0x3E
#define ST7796S_CMD_SET_TEAR_SCANLINE 0x44
#define ST7796S_CMD_GET_SCANLINE 0x45
#define ST7796S_DDB_START 0xA1
#define ST7796S_DDB_CONTINUE 0xA8
/* other */
#define ST7796S_CMD_ACCESS_PROTECT 0xB0
#define ST7796S_CMD_LOW_POWER_CONTROL 0xB1
#define ST7796S_CMD_FRAME_MEMORY_ACCESS 0xB3
#define ST7796S_CMD_DISPLAY_MODE 0xB4
#define ST7796S_CMD_DEVICE_CODE 0xBF
#define ST7796S_CMD_PANEL_DRIVE 0xC0
#define ST7796S_CMD_DISP_TIMING_NORMAL 0xC1
#define ST7796S_CMD_DISP_TIMING_PARTIAL 0xC2
#define ST7796S_CMD_DISP_TIMING_IDLE 0xC3
#define ST7796S_CMD_FRAME_RATE 0xC5
#define ST7796S_CMD_INTERFACE_CONTROL 0xC6
#define ST7796S_CMD_GAMMA_SETTING 0xC8
#define ST7796S_CMD_POWER_SETTING 0xD0
#define ST7796S_CMD_VCOM_CONTROL 0xD1
#define ST7796S_CMD_POWER_CONTROL_NORMAL 0xD2
#define ST7796S_CMD_POWER_CONTROL_IDEL 0xD3
#define ST7796S_CMD_POWER_CONTROL_PARTIAL 0xD4
#define ST7796S_CMD_NVMEM_WRITE 0xE0
#define ST7796S_CMD_NVMEM_PROTECTION_KEY 0xE1
#define ST7796S_CMD_NVMEM_STATUS_READ 0xE2
#define ST7796S_CMD_NVMEM_PROTECTION 0xE3
/**********************
* TYPEDEFS
**********************/
/**********************
* GLOBAL PROTOTYPES
**********************/
void st7796s_init(void);
void st7796s_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map);
2023-08-24 10:45:30 +00:00
void st7796s_enable_backlight(bool backlight);
2020-12-24 17:36:37 +00:00
/**********************
* MACROS
**********************/
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif /*ST7796S_H*/